User manual

Technical Data (valid for 23°C ± 5°, for less than 80% relative humidity)
Transmitter
Voltage range: 100V ... 250V
Power consumption: approx. 1W
Frequency range: 50...60Hz
Transmission frequency: approx. 8kHz
Transmitter frequency: approx. 10Hz
Temperature range: -10°C...+40°C
at max. 80% relative humidity
Dimensions: approx. 70 x 55 x 86 mm
Weight: approx. 65g
Power supply: from mains
Overvoltage category: CAT III / 300 V
Pollution degree: 2
Protection class: IP20
Receiver
Tracing depth for fuse assignment: approx. 0...10 cm, depending on local
conditions
Tracing depth for cable location: approx. 0...40 cm, depending on local
conditions
Sensitivity setting: via on/off potentiometer
Low battery indication: approx. 7.5V
Switching fuse/cable: manually via the push-button
Temperature range: -10°C...+40°C at max. 80%
rel.humidity
Dimensions: 22 x 162 x 34 mm
Weight: approx. 100g
Overvoltage category: CAT III / 300 V
Pollution degree: 2
Protection class: IP20
Power supply: 9 V block battery, IEC 6LR61,
Alkaline only
Applicable Directives and Standards: EMC: EN 50081-1 and EN 50082-1,
EN50082-2
Low Voltage Directive: EN61010-1
11
PTDB20250000-00.qxd 30.11.2005 16:12 Uhr Seite 11