Instructions

11
How to use “Opener-tool” to open UK safety
sockets:
To get access to the live and neutral pin of a UK safety
socket you have to release the safety covers first. This
could be easily done by pressing the “Opener-tool” into
earth pin of the socket.
How to use storage area for “GS 38 protective
probe cap”:
1
2
3
W Disconnect the voltage tester completely from any
measuring circuit first.
• Pull out the “GS 38 protective cap”
1
out of the “test
probe protector cover”, place onto the test probe tips
2
and push firmly to secure it.
• For removal and storage
3
, please perform the
opposite operation.
How to use storage area for “4mm Ø test probe
extension”:
5
4
7
6
8
W Disconnect the voltage tester completely from any
measuring circuit first.
• To retrieve push the “test probe tip” into the “4mm Ø
test probe extension”
4
and twist right it approx.. ¼
turn
5
.
• Then pull on probe
6
to remove “4mm Ø test probe
extension” and continue twisting until “4mm Ø test
probe extension” is tight
7
.
• For removal please do the opposite way
8
and store
it as shown in last picture.