User manual

Limited Warranty and Limitation of Liability
Your Amprobe product will be free from defects in material and workmanship for
one year from the date of purchase, unless local laws require otherwise. This warranty
does not cover fuses, disposable batteries or damage from accident, neglect, misuse,
alteration, contamination, or abnormal conditions of operation or handling. Resellers
are not authorized to extend any other warranty on the behalf of Beha-Amprobe. To
obtain service during the warranty period, return the product with proof of purchase
to an authorized Beha-Amprobe Service Center or to an Beha-Amprobe dealer or
distributor. See Repair Section for details. THIS WARRANTY IS YOUR ONLY REMEDY.
ALL OTHER WARRANTIES - WHETHER EXPRESS, IMPLIED OR STATUTORY - INCLUDING
IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY,
ARE HEREBY DISCLAIMED. MANUFACTURER SHALL NOT BE LIABLE FOR ANY SPECIAL,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY
CAUSE OR THEORY. Since some states or countries do not allow the exclusion or limitation
of an implied warranty or of incidental or consequential damages, this limitation of
liability may not apply to you.
Repair
All test tools returned for warranty or non-warranty repair or for calibration should be
accompanied by the following: your name, company’s name, address, telephone number,
and proof of purchase. Additionally, please include a brief description of the problem or
the service requested and include the test leads with the meter. Non-warranty repair or
replacement charges should be remitted in the form of a check, a money order, credit card
with expiration date, or a purchase order made payable to Amprobe.
In-Warranty Repairs and Replacement – All Countries
Please read the warranty statement and check your battery before requesting repair.
During the warranty period any defective test tool can be returned to your Amprobe
distributor for an exchange for the same or like product.
Non-Warranty Repairs and Replacement – Europe
European non-warranty units can be replaced by your Amprobe distributor for a
nominal charge. Please check the “Where to Buy” section on www.amprobe.eu for a list
of distributors near you.
European Correspondence Address*
Beha-Amprobe®
Beha-Amprobe GmbH
In den Engematten 14
79286 Glottertal, Germany
Tel.: [phone] - 0
www.amprobe.eu
*(Correspondence only – no repair or replacement available from this address. European
customers please contact your distributor.)
Telaris Multifunction Installation
Tester Series
ProInstall-100-EUR / ProInstall-200-EUR
ProInstall-100-D / ProInstall-200-D
ProInstall-100-CH / ProInstall-200-CH
ProInstall-100-DK
Quick Reference Guide
V, Hz
L-N
L-PE
N-PE
2
PE (L2)
N
PE
L
N (L3)
L (L1)
3
1
R
ISO
50
100
250
500
1000 V
2
1
4
/
R
ISO
3
PE (L2)
L (L1)
Insulation
·
Isolement
·
Isolation
R
LO
R
LO
4
3
1
5
/
2
Continuity
·
Continuité
·
Niederohm
PE (L2)
L (L1)
> 2 s
2
1
OK
Z
I
4
3
L-PE
L-N
1
2
Loop
·
Boucle
·
Schleife