User Manual

10
W Caution
During current measurement keep the jaws away from other current-
carrying devices such as transformers, motors or energized wires, as they
may negatively influence accuracy of the measurement.
Precise Low-Current Measurement
W Warning
To avoid electrical shock and injury:
• Remove Test Leads before making current measurements.
• Do not hold the Meter anywhere beyond the tactile barrier.
• Do not use the Meter to measure currents above the maximum rated
frequency (400Hz). Circulating currents may cause the magnetic circuits
of the Jaws reach hazardous excessive temperatures.
To measure AC or DC low-current for small conductors:
1. Turn the rotary function switch to
.
2. Press SELECT button to choose measurement function (AC A, DC A,
DC+AC A, or Hz). The display reflects the chosen function mode.
3. Open the clamp by pressing the jaw release and insert the conductor
into the clamp. Ensure the jaws are firmly closed.
4. Align the conductor at the specified jaw tip area for low-current
measurement.
5. View the current reading on the display.
6. When measuring AC or AC + DC current, press Hz button to view the
frequency reading on the display.