Datasheet

www.Beha-Amprobe.com
©2014 Beha-Amprobe
®
13310-engBeha-Amprobe
®
| In den Engematten 14 | 79286 Glottertal, Germany | Tel: [phone] | [e-mail] | www.Beha-Amprobe.com
Features AT-7020-EUR Kit AT-7030-EUR Kit
Traces Energized and De-Energized Wires
⚫ ⚫
Locates Energized and De-Energized Breakers
⚫ ⚫
Pinpoints Shorts and Opens
⚫ ⚫
Three Power Modes
• ”High” power mode for normal circuits
• ”Low” power mode for precision tracing in difcult areas
• ”Clamp” power mode provides a boosted induction signal via the signal clamp
⚫ ⚫
Two Frequency Modes for Optimal Tracing
• 6 kHz for energized circuits
• 33 kHz for de-energized circuits
⚫ ⚫
Signal Booster Rechargeable Battery Pack (BR-7000-T)
• Longer life LI-ION battery
• Recharges when AT-7000-TE transmitter plugged into energized circuit
• Improved signal for open and energized tracing
• Boosted signal when in “Clamp” mode
(optional)
⚫
Signal Clamp (SC-7000-EUR)
• Clamp-on attachment for inducing signal into wires without access to bare conductors
(optional)
⚫
Smart Sensor
™
Quickly and easily determine the precise
direction and location of energized wires in
walls, oors and ceilings with the patented
Smart Sensor
™
. Combined with a fast signal
processor that measures small changes in the
detected signal multiple times per second,
this new technology provides unmatched
precision and ease of use for tracing
energized wires.
Signal Clamp
When there’s no access to bare conductors,
use the SC-7000-EUR signal clamp to induce a
signal into either energized or de-energized
circuits for wire tracing and load locating.
The AT-7000-TE transmitter’s “clamp” mode
provides a boosted 6 kHz signal through
the clamp to further improve accuracy and
performance.
AT-7000-TE Transmitter
Featuring three power modes “high”,
“low”, and “clamp” and two output
frequencies (6kHz and 33 kHz), the
AT-7000-TE incorporates the best
technologies available for optimal wire
tracing and breaker identication on
both energized and de-energized circuits.
The AT-7000-TE automatically sets the
frequency based on detected voltage, and
prompts the user to set the power level
based on their application. The color TFT
LCD screen displays the detected voltage,
frequency output and power mode.
Tip Sensor
The shape of the tip sensor allows tracing in
hard to reach areas, corners & tight spaces,
as well as precise circuit breaker and fuse
identication. By utilizing two different
types of antennas (inductive coil and
capacitive), the tip sensor enables optimal
tracing results of both energized and de-
energized circuits, which are automatically
selected by operating mode.
Tip Sensor
SC-7000-EUR
Signal Clamp
AT-7000-RE
Receiver
Smart Sensor
™
AT-7000-RE
Receiver
AT-7000-TE
Transmitter
Power Mode
Buttons (High,
Low, Clamp)
The AT-7000-EUR Advanced Wire Tracer is available in two feature-packed kits
AT-7000-EUR Features and Functions