Datasheet

Fluke Precision Measurement Ltd.
52 Huricanne Way
NR6 6 JB United Kingdom
e-mail: info@beha-amprobe.co.uk
beha-amprobe.com
Fluke Europe BV
Science Park Eindhoven
5110 NL-5692 EC Son
The Netherlands
Tel. +31 (0) 40 267 51 00
beha-amprobe.com
Fluke Deutschland GmbH
In den Engematten 14
79286 Glottertal, Germany
Tel. +49 (0) 7684 - 8009-0
info@beha-amprobe.de
beha-amprobe.de
beha-amprobe.com
©2018 Beha-Amprobe
®
6009730 A-eng
Beha-Amprobe
®
Division of Fluke Corp. (USA)
c/o Fluke Europe BV
Tip Sensor
Trace wires in
tight spaces
Non-Contact
Voltage
Volume
Adjustment
Full Color
TFT-LCD display
Example: the green
arrow indicates the
correct breaker/fuse is
identied
Transmission
Mode Indicator
Shows whether
transmitter is in
high, low or loop
mode
Loop Mode
Indicator
High Signal Mode
Loop Mode
Low Signal
(Precision) Mode
Sensitivity
adjustment
AT-6000-EUR Series
Advanced Wire Tracer Series
Trace energized/de-energized wires, identify breakers and fuses
The AT-6000-EUR Series, available in two different kits,
combines a receiver and powerful transmitter to locate
energized and de-energized wires, breakers and fuses. Whether
you’re a novice or an expert, the Beha-Amprobe advanced wire
tracer kit will help you get the job done fast.
The AT-6000-RE Receiver detects the signal in wires and
cables using two methods: active tracing method (with
the Transmitter) and passive tracing method (without the
Transmitter). In hard-to-reach areas, the Receiver’s Tip Sensor
can be used to trace wires in corners, tight spaces and junction
boxes. The breaker/fuse mode provides an advanced tracing
function to locate and identify the correct breaker/fuse in a
quick and very convenient way.
The AT-6000-TE Transmitter works on Energized and De-
energized circuits up to 600 V AC/DC in Category I through
Category III electrical environments and features high signal,
low signal, and loop modes. The Breaker Identication feature
eliminates confusion of multiple false positives, common with
older technology tracing tools, by identiying the one correct
breaker or fuse with the highest recorded signal.
The CT-400-EUR Signal Clamp (optional for AT-6020-EUR,
included with AT-6030-EUR) is used for applications where is
no access to the bare conductors by enabling the AT-6000-TE
Transmitter to induce a signal into a wire through the
insulation.
Quick Scan Wire Tracing
allows for quick wire
detection at a longer distance
Precision Wire Tracing
precisely pinpoints wires or
faults located behind walls,
oors, or ceilings
Breaker/fuse Identication
is an automatic sensitivity
feature that allows for
quick and easy breaker/
fuse locating without the
guesswork
Non-Contact Voltage
Detection utilizes passive
tracing without the
transmitter to verify if
a wire is Energized
AT-6000-RE
Receiver
AT-6000-TE
Transmitter
Safety Certication
All Beha-Amprobe tools, including the
Beha-Amprobe AT-6000-EUR Series, are rigorously
tested for safety, accuracy, reliability, and
ruggedness in our state-of-the-art test lab. In
addition, Beha-Amprobe products that measure electricity
are listed by a 3rd party safety lab, either UL or CSA. This
system assures that Amprobe products meet or exceed
safety regulations and will perform in a tough, professional
environment for many years to come.
Four Tracing Modes

Summary of content (3 pages)