User Manual

5.6 Manual Data Memory and Read Mode

The Luxmeter 93560 is equipped with an integrated data memory allowing to save

of up to 99 measurement results.

• Press "MEM" key each time, one set of reading to be stored to the memory.

At this moment, LCD will show the " M " mark one time and the memory

address number. Total memory size is 99 sets.

• Press "READ" key to enter the READ mode, the LCD will show " R " mark and

the memory address number.

• Press the ”navigation” keys to select the desired memory address number

data for display.

• Press " READ " key to exit this mode

Clear the manual memorized data

• Press “I” key to turn off the meter.

• Press and hold down "MEM" key, then press “I” key to turn on the meter. When

LCD shows "CLr" which means the memorized data is erased.