Datasheet

www.Amprobe.com
Amprobe® Test Tools
Data Sheet
No hassle
warranty
No waiting.
No shipping
charges.
Our commitment to
high-quality products
and customer service
is demonstrated by
our industry exclusive
“No Hassle” warranty.
In the unlikely event
that an Amprobe Test
Tool requires warranty
service, any of our
local dealers are
authorized to replace
it, on the spot.
(note: $500 MSLP limit)
LM-100
Light Meter
The Amprobe LM-100 light meter measures the visible light
from fluorescent, metal halide, high-pressure sodium or
incandescent sources. It is a portable, easy-to-use digital light
meter designed for simple one-hand operation reading in
Lumen (lux) or footcandle (fc) units. The LM-100 measures a
wide range of light up to 20,000 fc or lux with an accurate,
high resolution of 0.01 fc/lux.
Use the LM-100 light meter to measure the illumination level
in the interior and to switch off or reduce or increase the
output level of lighting fixtures. Reduce the energy burden
of the building by significantly increasing the efficiency of its
lighting system.
One lux is the illumination from a one candela lamp
perpendicular to a surface one meter squared at a distance of
one meter. One fc is the illumination from a one candela lamp
perpendicular to a surface one foot squared at a distance
of one foot. 1 footcandle = 10.764 lux and 1 lux = 0.09290
footcandles
Measure in Lux or Footcandles, front panel switchable ■
Measuring Range to 200000 Lux or 20000 Foot candles ■
Silicon photodiode sensor and filter ■
Data Hold to freeze reading on the digital display ■
MAX ability to show high readings ■
Includes protective sensor cap ■
Large, 3-1/2 digit display ■