Datasheet

PM 55 Specifications cont.
Frequency
Range Accuracy Specified at
10.00 Hz - 30.00 kHz
1, 2
± (0.5 %+4 dgt) < 2 0 V Sine-rms
1
0.00 Hz - 999.9 Hz ± (0.5 %+4 dgt) < 600 V Sine-rms
1
Sensitivity (Sine-rms): Hz in A
uto-V ( position:> 3 V
2
Line-level Hz in V position: @6.000 V ac r
ange: > 3 V; @60.00 V ac range: > 6 V; @600.0 V ac range: > 60 V
DC µA Current
Range Accuracy Burden voltage
400.0 µA ± (1.5 %+3 dgt) 6 mV/µA
2
000 µA ± (1.2 %+3 dgt) 6 mV/µA
AC µA Current
Range Accuracy Burden voltage
400.0 µA ± (2.0 %+3 dgt) 6 mV/µA
2000 µA ± (1.5 %+3 dgt) 6 mV/µA
VolTect™
Typical voltage Bar graph indication
15 V to 55 V –
30 V to 85 V – –
55 V to 145 V – – –
85 V to 190 V – – – –
above 120 V – – – – –
Indication Bar graph segments & audible beep tones proportional to field strength
Detection frequency 50/60 Hz
Detection antenna Top left corner of the meter
Audible Continuity Tester (600 Ω range)
Open circuit voltage 0.4 V dc typical
Audible threshold 50 Ω to 300 Ω
Diode Test
Diode test current 0.48 mA
Open circuit voltage < 1.6 V dc
General Specifications
Displa
y and update r
ate
3-5/6 digits 6000 counts; Updates 5 per second nominal
Oper
ating temper
ature
0 ˚C - 40 ˚C
Relative humidity Max. 80 % R.H. up to 31 °C, decreasing linearly to 50 % R.H. at 40 ˚C
Altitude Operating below 2000 m
Stor
age temper
atur
e
-2
0 ˚C ~ 60 ˚C, < 80 % R.H. (with battery r
emo
v
ed)
Temperature coefficient Nominal 0.15 x (specified accuracy)/ ˚C @ (0 ˚C ~ 18 ˚C or
28 ˚C ~ 40 ˚C), or otherwise specified
Sensing A
v
er
age sensing
Overload protection 600 V dc and V ac rms
Low battery Below approx. 2.4 V
Power supply 3 V standard button battery x 1 (IEC-CR2032; ANSI-NEDA-5004LC)
Power consumption (typical) 6 mA for voltage functions on Auto-V W position & 2 mA for other functions
Automatic Power Off
(APO) timing Idle for 3 minutes
APO consumption (typical) 2.2
µ
A
Dimension/Weight L 113 mm x W 53 mm x H 10.2 mm (4.4 x 2.1 x 0.4 in)/Approx. 78 gm (3 oz)
Special featur
es
A
utoT
ect™ (Automatic V &
Ω selection) and V
olT
ect™ (Electric Field Detection)
Agency approvals CE, cULus
Safety Meets IEC61010-1, UL61010B-1, CAN/CSA-C22.2 No. 1010.1-92,
CA
T II 600 V and CA
T III 300 V, Pollution Degree 2, Class 2
E.M.C. Meets EN61326
Included
A
c
cess
or
ies
H-PM protective holster, VC3 zippered carrying case, battery installed and User’s manual.
PM 55
The compact precision DMM with AutoTect
™
and VolTect
™
Meterman Test Tools
website: www.metermantesttools.com
email: [e-mail]
6920 Seaway Blvd.
Everett, WA 98203
fax: [phone]
tel: [phone]
Meterman Test Tools Europe
P.O. Box 1186
560
2 BD Eindho
v
en
The Netherlands
©2
004 Meterman T
est T
ools
. All rights r
eserved.
Printed in U.S.A. 8/2004 2277165 D-US-N Rev A
Meterman.
The right tool for the job
™
Compact Digital Multimeter with AutoTect
™
and VolTect
™
Electrical noise or intense electromagnetic fields
in the vicinity of the equipment may disturb
the measurement circuit. Measuring instru-
ments will also respond to unwanted signals
that may be present within the measurement
circuit. Users should exercise care and take
appropriate precautions to avoid misleading
r
esults when making measur
ements in the
presence of electronic interference.