Datasheet

www.amprobe.eu
Amprobe® Test Tools
Data Sheet
No hassle
warranty
No waiting.
No shipping
charges.
Our commitment to
high-quality products
and customer service
is demonstrated by
our industry exclusive
“No Hassle” warranty.
In the unlikely event
that an Amprobe Test
Tool requires warranty
service, any of our
local dealers are
authorized to replace
it, on the spot.
(note: €500 MSLP limit)
SM-10
Sound Meter
The Amprobe SM-10 Sound Level Meter is designed to meet
the measurement requirements of Safety Engineers, Health,
Industrial safety offices and Quality Control in various
environments. It offers two types of measurements: A and
C weighting.
The A weighting is for general noise sound level and the C
weighting is for measuring sound level of acoustic material
control in various environments (ie 94dB 1 kHz etc...). The
SM-10 conforms to the IEC651 Type 2, ANSI S1.4 Type 2, and
JISC1502 requirements for Sound Level Meters. Which means
the SM-10 uses two different weighting filters required by
the IEC 651 and ANSI S1.4 Type 2: the A-Weighting and the
C-Weighting audio filtering.
Designed to meet the measurement requirements of ■
Safety Engineers, Health, Industrial safety offices and
quality control in various environments.
A and C weightings for checking compliance with safety ■
regulations as well as acoustic analysis
Measuring ranges: ■
A Weighting 30 ~130dB
C Weighting 35~130dB
Frequency range: 31.5Hz~8KHz ■
Display with 0.1dB steps on a 4 digits LCD ■
Slow (1 sec) and fast (125ms) response settings to check ■
peak and average noise levels
MAX/MIN recording ■
Data Hold to freeze reading on digital display ■
Accessories supplied: Carrying case, windscreen, user ■
manual and 9V Battery
CE, designed to meet IEC651 Type2, ANSI S1.4 Type2 ■