Datasheet

www.amprobe.eu
Amprobe® Test Tools
Data Sheet
©2008 Amprobe Test Tools. All rights reserved.
7/2008 3358179 Rev A
Amprobe® Test Tools Europe
Amprobe Test Tools Europe
Beha-Amprobe GmbH
In den Engematten 14
79286 Glottertal, Germany
Tel.: [phone] - 0
Amprobe® Test Tools
website: www.Amprobe.com
email: [e-mail]
Everett, WA 98203
Tel: 877-AMPROBE
SM-10 Sound Meter
Specifications
General Specifications
Display 4 digits LCD
Microphone 1/2 inch Electret condenser microphone
Low Battery Indication Replace battery when LCD displays “”
Power Supply 9V NEDA 1604, IEC 6F22, JIS 006P battery
Power Life Approx. 50 hrs (alkaline Battery)
Auto Power Off Approx. 5 min
Environment Indoor operation, < 2000 m
Temperature / Humidity
Operation 5 °C to 40 °C (41°F to 104°F); < 80% RH
Storage -10 °C to 60 °C (14°F to 140°F); < 70 %RH
Dimension 200 x 55 x 38 mm (7.8 x 2.2 x 1.5 in)
Weight 233g. (0.5 lb.) Including battery
Electrical (Audio)
Standard applied IEC 651 Type2, ANSI 1.4 Type 2
Dynamic range 50 dB
Resolution 0.1 dB, Display Update: 0.5 sec.
Time weighting FAST(125mS), SLOW(1 sec)
Frequency range: 31.5 Hz to 8 kHz
Measuring level range (Auto Range)
A Weighting: 30 to 130 dB
C Weighting: 35 to 130 dB
Accuracy ± 1.5 dB
Calibration cycle 1 year
-EMC EN61326-1 This product complies with requirements of the following European Community Directives:
89/336/EEC (Electromagnetic Compatibility) and 73/23/EEC (Low Voltage) as amended by 93/68/EEC
(CE Marking). However, electrical noise or intense electromagnetic fields in the vicinity of the equip-
ment may disturb the measurement circuit. Measuring instruments will also respond to unwanted sig-
nals that may be present within the measurement circuit. Users should exercise care and take appropri-
ate precautions to avoid misleading results when making measurements in the presence of electronic
interference.
Pub_ID: 11505-eng-01-A