User's Manual

3 Hardware Installation

Step 1: Make sure your PC is switched off.

Step 2: Connect the receiver to your PC by plugging in the receiver’s

plug into the USB port of your PC.

Step 3: Take the keyboard and make sure the batteries on the back are

installed correctly. (Follow the polarity signs in the battery

compartment.)

ID Button

1.5V 2pcs

Step 4: Take the mouse and make sure the batteries on the back are

installed correctly. (Follow the polarity signs in the battery

compartment.)

ID B tt

Remarks:

1. Both of the keyboard and mouse use 2pcs.standard UM-3 (AA) 1.5V

alkaline batteries.

Back View of Receiver Plug

Bottom View of Keyboard

Bottom View of Mouse

Front View of Receiver Plug