LCD TV PLASMA TV OWNER’S MANUAL LCD TV MODELS PLASMA TV MODELS 32LB9D 42PB4DA 50PB4DA 60PB4DA Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc.
R is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. TruSurround XT TruSurround XT LG TV with this logo displays Full HD(high-definition) 1080p native resolution by receiving and processing a Full HD 1080p signal. LG TV with this logo can play MP3 music from a MP3 player, such as iPOD, and JPEG images from a digital camera through the USB device.
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”.
9 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 12 Refer all servicing to qualified service personnel.
CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 MEDIAHOST FEATURE OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TIME SETTING Clock Setting - Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 - Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Auto On/Off Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Auto Shut-off Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FEATURE OF THIS TV What is a Plasma TV? Using plasma is the best way to achieve flat panel displays with excellent image quality and large screen sizes that are easily viewable. The Plasma TV can be thought of as a descendant of the neon lamp and or a series of fluorescent lamps. How does it work? Plasma TV is an array of cells, known as pixels, which are comprised of three sub-pixels, corresponding to the colors red, green, and blue.
PREPARATION ACCESSORIES M EN U BR IG HT + EN TE R T ER M TI RA TI O SIMPLIN K FA V TV CH IN PU T PO W ER TV AU DIO DV M D CA ODE BL E IN PU T R VC B ST BR IGH T- M U BR IG + IT EX R HT EN TE EN PREPARATION Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product.
PREPARATION FRONT PANEL INFORMATION PREPARATION ■ Here shown may be somewhat different from your TV. ■ NOTE: If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a polishing cloth is included with your product, use it). Plasma TV Model Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. Illuminates white when the set is switched on.
PREPARATION LCD TV Model CH CH ENTER Button MENU Button INPUT INPUT MENU MENU VOLUME (F,G) Buttons ENTER ENTER Intelligent Eye Adjusts picture according to the surrounding conditions. VOL VOL Remote Control Sensor CHANNEL (E,D) Buttons INPUT Button POWER Button Power/Standby Indicator Illuminates red in standby mode. Illuminates green when the set is switched on.
PREPARATION BACK PANEL INFORMATION ■ Here shown may be somewhat different from your TV.
PREPARATION 1 HDMI/DVI IN Connect a HDMI signal to 1, 2 or 3. Or DVI (VIDEO) signal to the 1, 2 or 3 port with a DVI to HDMI cable. 2 COMPONENT IN Connect a component video/audio device to these jacks. 3 RGB (PC) AUDIO (RGB/DVI) Connect the monitor output from a PC to the appropriate input port. 4 REMOTE CONTROL PORT Connect your wired remote control. 5 RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. 6 ANTENNA/CABLE IN Connect over-the air signals to this jack.
PREPARATION STAND INSTALLATION (Only 32LB9D) PREPARATION 12 1 Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Assemble the product stand with the product as shown. 3 Install the 4 bolts securely, in the back of the product in the holes provided.
ATTACHING THE TV TO A DESK (Only 32LB9D model) The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. PREPARATION Stand 1-Screw (provided as parts of the product) Desk WARNING G This apparatus must be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury/death.
PREPARATION BACK COVER FOR WIRE ARRANGEMENT ■ Here shown may be somewhat different from your TV. PREPARATION Plasma TV Model 1 Hold the CABLE MANAGEMENT with both hands and pull it backward as shown. CABLE MANAGEMENT 14 2 Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 3 Install the CABLE MANAGEMENT as shown.
1 Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 2 Install the CABLE MANAGEMENT as shown. (Insert it as pushing the loops on the both sides of the cable management.) PREPARATION LCD TV Model CABLE MANAGEMENT 3 Bundle the cables using the supplied TWIST HOLDER. ! NOTE G Do not hold the CABLE MANAGEMENT when moving the product. - If the product is dropped, you may be injured or the product may be broken.
PREPARATION ATTACHING THE TV TO A WALL ■ Here shown may be somewhat different from your TV. PREPARATION We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV.
DESKTOP PEDESTAL INSTALLATION For proper ventilation, allow a clearance of 4inches on all four sides from the wall. LCD TV Model 4 inches 4 inches 4 inches CAUTION PREPARATION Plasma TV Model 4 inches G 4 inches 4 inches 4 inches 4 inches Ensure adequate ventilation by following the clearance recommendations.
PREPARATION VESA WALL MOUNTING This product accepts a VESA-compliant mounting interface pad. (optional) There 4 threaded holes are available for attaching the bracket. PREPARATION Plasma TV Model LCD TV Model 200 mm 600 mm R 100 mm R 400 mm ! NOTE G Screw length needed depends on the wall mount used. For further information, refer to the VESA Wall Mounting Instruction Guide.
ANTENNA OR CABLE CONNECTION ■ Here shown may be somewhat different from your TV. R 1. Antenna (Analog or Digital) PREPARATION Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed.
EXTERNAL EQUIPMENT SETUP ■ ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. This part of EXTERNAL EQUIPMENT SETUP mainly use picture for LCD TV model. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. 1.
When connecting HDMI cable 1. How to connect 1 RGB IN HDMI/DVI IN RGB(PC) AUDI (RGB/D 3 COMPONENT I No separated audio connection is necessary. HDMI supports both audio and video. 2 2 2 1 ( 1 ) VIDEO 2. How to use ■ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) ■ Select HDMI1, HDMI2 or HDMI3 input source with using the INPUT button on the remote control.
EXTERNAL EQUIPMENT SETUP When connecting HDMI to DVI cable EXTERNAL EQUIPMENT SETUP ANTENNA/ CABLE IN RGB IN HDMI/DVI IN AUDIO (RGB/DVI) RGB(PC) DIGITAL AUDIO OUT REMOTE CONTROL IN OPTICAL COAXIAL 3 RS-232C IN (CONTROL & SERVICE) COMPONENT IN 1 AUDIO OUT AUDIO VIDEO AUDIO (MONO) VIDEO AV IN 1 1 2 S-VIDEO 2 2 1 DVI-DTV OUTPUT L R 1. How to connect 1 Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1, 2 or 3 jack on the set.
DVD SETUP When connecting Component cable 1. How to connect RGB IN /DVI IN AUDIO (RGB/DVI) RGB(PC) R CO COMPONENT IN 2 Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O 1 jacks on the set. (CO 2 1 AUDIO VIDEO 2. How to use ■ Turn on the DVD player, insert a DVD. ■ Select COMPONENT 1 input source by using the I N P U T button on the remote control. ■ If connected to C O M P O N E N T I N 2 input, select C o m p o n e n t 2 input source.
EXTERNAL EQUIPMENT SETUP When connecting with an S-Video cable 1. How to connect AUDIO S-VIDEO 2 Connect the audio outputs of the DVD to the A U D I O input jacks on the set. ANT CAB Turn on the DVD player, insert a DVD. ■ ■ Select A V 1 input source by using the I N P U T button on the remote control. If connected to A V I N 2, select A V 2 input source. ■ Refer to the DVD player's manual for operating instructions. 2 1 2.
VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. ■ Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period ( ) of time (Only Plasma TV model). If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon.
( ) EXTERNAL EQUIPMENT SETUP When connecting with a RCA cable ANT IN S-VIDEO ANT OUT OUTPUT SWITCH VIDEO L R 1. How to connect V I D E O jacks between TV and Connect the A U D I O/V VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) ■ ■ ANTEN CABL UDIO B/DVI) Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.
OTHER A/V SOURCE SETUP Camcorder 1. How to connect V I D E O jacks Connect the A U D I O/V between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) Select A V 2 input source by using the I N P U T button on the remote control. ■ If connected to A V I N 1 input, select A V 1 input source. ■ Operate the corresponding external equipment. USB ■ L AV IN 2 S-VIDEO VIDEO L/MONO AUDIO R 2.
EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting D-sub 15 pin cable RGB IN 1 Connect the RGB output of the PC to the R G B ( P C) jack on the set. 2 Connect the PC audio output to the A U D I O ( R G B / D V I) jack on the set. MI/DVI IN RGB(PC) AUDIO (RGB/DVI) COMPONENT IN C (CO 2 1 AUDIO VIDEO 1 2 RGB OUTPUT AUDIO S-VIDEO EXTERNAL EQUIPMENT SETUP 1. How to connect 2.
When connecting HDMI to DVI cable ANTENNA/ CABLE IN RGB IN HDMI/DVI IN DIGITAL AUDIO OUT REMOTE CONTROL IN OPTICAL COAXIAL 3 RS-232C IN (CONTROL & SERVICE) COMPONENT IN 1 AUDIO OUT VIDEO AUDIO AUDIO (MONO) VIDEO AV IN 1 1 2 S-VIDEO 2 2 1 DVI-PC OUTPUT L EXTERNAL EQUIPMENT SETUP AUDIO (RGB/DVI) RGB(PC) R 1. How to connect 1 Connect the DVI output of the PC to the H D M I / D V I I N1 , 2 or 3 jack on the set.
EXTERNAL EQUIPMENT SETUP ! NOTES EXTERNAL EQUIPMENT SETUP 30 G To get the the best picture quality, adjust the PC graphics card to 1920x1080, 60Hz. G Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. G Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode.
Supported Display Specifications RGB-PC, HDMI1/DVI-PC mode Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x350 31.469 70.08 720x400 31.469 70.08 640x480 31.469 59.94 800x600 37.879 60.31 1024x768 48.363 60.00 1280x768 47.776 59.87 1360x768 47.720 59.799 1366x768 47.130 59.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Overview EXTERNAL EQUIPMENT SETUP When the RGB input, of the set is connected to a PC Output, Select RGB-PC with using the INPUT button on the remote control. When you change the resolution, select the proper resolution in present input to see the best picture appearance. 1 Press the M E N U button and then use D or E button to select the P I C T U R E menu.
Adjustment for screen Resolution, Position, Size, and Phase 1 Use D or E button to select R e s o l u t i o n, Position, S i z e, or Phase. 1024 x 768 Auto Config. 1280 x 768 Position 1360 x 768 Size 2 3 Press the ENTER button and then use D E F button to make appropriate adjustments. ■ The P h a s e adjustment range is -16 ~ +16. ■ The S i z e adjustment range is -30 ~ +30. G Press the ENTER button.
EXTERNAL EQUIPMENT SETUP USB IN SETUP The TV has a special signal output capability which allows you to hook up the second TV or monitor. EXTERNAL EQUIPMENT SETUP USB AV IN 2 or 1 VIDEO L/MONO AUDIO R S-VIDEO 1. How to connect 1 Connect the USB device to the U S B I N (or U S B) jack on the side of TV. 2. How to use ■ After connecting the U S B I N (or U S B) jack, you use the MEDIAHOST function. (G p .
AUDIO OUT SETUP Send the TV’s audio to external audio equipment via the Digital Audio Output (Optical) port. Analog AUDIO L R Connect audio outputs to the TV’s AUDIO OUT jacks. 1 1 ANTENNA/ CABLE IN Set the “TV Speaker option - Off” in the AUDIO menu. (G p . 7 1). See the external audio equipment instruction manual for operation.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. MEDIAHOST MEDIAHOST mode control buttons ■ VCR/DVD buttons ■ Controls the MEDIAHOST mode. TV INPUT MEDIAHOST Control video cassette recorders or DVD players. STB WATCHING TV / CHANNEL CONTROL MEDIA HO ST MENU Displays the main menu. BRIGHT +/- ■ Adjust brightness on screen. ■ It turns to the default settings brightness by changing mode source.
STB MEDIA HO ST POWER Turns your TV or any other programmed equipment on or off, depending on the mode. TV INPUT In AV 1-2, Component 1-2, RGB-PC, HDMI1, HDMI2 and HDMI3 input sources, screen returns to the last TV channel. INPUT External input modes rotate in regular sequence: Antenna, Cable, AV1-2, Component 1-2, RGB-PC, HDMI1, HDMI2, HDMI3 (Antenna, Cable, AV 1-2, Component 1-2, RGB-PC, HDMI1, HDMI2, HDMI3 input sources are linked automatically, only if these are connected ).
TV INPUT WATCHING TV / CHANNEL CONTROL STB MEDIA HO ST TURNING ON TV INPUT TV INPUT First, connect power cord correctly. At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the , INPUT, C H (D or E) button on the TV or press the POWER, INPUT, TV INPUT, C H (D or 9 ) button on the remote control. E), Number (0~9 1 WATCHING TV / CHANNEL CONTROL Select the viewing source by using the TV INPUT, INPUT button on the remote control.
ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. 1 Press the M E N U button and then use D or E button to select the each menu. 2 Press the G button and then use D E F G button to display the available menus.
WATCHING TV / CHANNEL CONTROL CHANNEL SETUP T TV INPUT TV INPUT Auto Scan (Auto Tuning) STB B EJECT MEDIA HO ST WATCHING TV / CHANNEL CONTROL OUND TV INPUT STB STB STB MEDIA HO ST MEDIA HO MEDIA HO ST ST Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. A password is required to gain access to Auto Tuning menu if the Lock System is turned on.
TV INPUT TV INPU TV INPUT TV INPUT Add/Delete Channel (Manual Tuning) STB MEDIA HO ST STB STB MEDIA HO ST A password is required to gain access to Manual Tuning menu if the Lock System is turned on. If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. MEDIA HO ST MENU BRIGHT T+ RATIO LINK SIMP Auto Tuning 1 Press the M E N U button and then use D or E button to select the SETUP menu.
WATCHING TV / CHANNEL CONTROL TV INPUT TV INPUT STB TV INPUT MEDIA HO ST STB STB MEDIA HO ST MEDIA HO ST Channel Editing BRIGHT WATCHING TV / CHANNEL CONTROL From the default channel list created from the Auto Tuning channel search, you can create two different types of channel lists in memory: “custom list” and “favorite channel list”. A custom list can be created by toggling each channel on or off with ENTER button.
INPUT LIST INPUT TV INPUT Press the I N P U T button to display external device that is connected to the unit, on screen. Press the E N T E R button to change the input to the active external device. Use the D or E button to select the input source.
WATCHING TV / CHANNEL CONTROL TV INPUT This operates only for the devices with the logo. Please check the logo. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. STB BRIGHT - MEDIA HO ST MENU MENU BRIGH T+ WATCHING TV / CHANNEL CONTROL SimpLink Preparations INK TIMER Connect the HDMI/DVI IN 1, 2 or 3 terminal of the TV to the rear terminal (HDMI output) of the Simplink device with the HDMI cable.
TV INPUT TV INPUT SimpLink Functions D i r e c t P l a y : After connecting AV devices to TV, you can directly control the devices and play media without additional settings. ■ S e l e c t A V d e v i c e : Enables you to select one of AV devices connected to TV and play it.
WATCHING TV / CHANNEL CONTROL INPUT LABEL TV INPUT TV INPUT TV INPUT Sets a label to each input source which is not in use when you press the INPUT button. STB MEDIA HO ST STB STB MEDIA HO ST ST MENU BRIGHT WATCHING TV / CHANNEL CONTROL TIMER Language 1 BACK 2 Press the G button and then use select Input Label.
KEY LOCK TV INPUT TV INPU TV INPUT TV INPUT The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off. STB MEDIA HO ST STB STB MEDIA HO ST MEDIA HO ST MENU BRIGHT BRIGH T+ Language 1 Press the M E N U button and then use D or E button to select the OPTION menu.
MEDIAHOST HOST MEDIAHOST MEDIA MEDIA ENTRYHOST MODES When you connect a USB device or press the displayed, automatically. MEDIA HO ST button, this screen is Media Host Menu In USB device, you can not add a new folder or delete the existing folder. 1 Press the D or E button to select the desired item. BACK MEDIA HOST 2 Press the ENTER button to move to Photo List or Music List of USB device. 3 Press the USB EJECT button of remote control before removing the USB device.
PHOTO LIST It’s available to playback the photo file(*.jpg) in the USB device. The On Screen Display may be different from your set. Images are an example to assist with the TV operation.
MEDIAHOST MEDIAHOST Photo Selection and PopUp Menu As shown, up to 15 thumbnail photos are listed per page. MEDIA HOST 1 Use the C H D or E button to navigate in the thumbnail photo page. 2 Use the M A R K button to mark or unmark a photo. When one or more photos are marked, you can view individual photos or a slide show of the marked photos. If no photos are marked, you can view all photos individually or all photos in the folder in a slide show.
Set up the menu in Full-Sized Screen You can change the settings to display photos stored on a USB device, on a full-sized screen. Detailed operations are available on full-sized photo view screen. 1 Use the C H photo page. 2 Use D E F G button to navigate the appropriate thumbnail photos, then press the E N T E R button to show the PopUp menu. 3 Use D or E button to Move to the V i e w menu, then press the E N T E R button. 4 The selected photo is displayed in full size.
MEDIAHOST MEDIAHOST G MEDIA HOST G O p t i o n: Set values for S l i d e S p e e d and M u s i c f o l d e r. Use F or Gbutton to select O p t i o n and press E N T E R button. ■ Use F or G button and E N T E R button to set values. Then go to and press E N T E R to save the settings. ■ You cannot change M u s i c F o l d e r while BGM is playing. H i d e: Hide the menu on the full-sized screen. Use F or G button to select H i d e and press E N T E R button.
MUSIC LIST TV INPUT TV INPUT TV INPUT Purchased music files(*.MP3) may contain copyright restrictions. HOST this model. Playback of MEthese files may not be supportedMEDIAby DIA HOST Music file on your USB device can be played by this unit. STB STB STB TV INPUT TV INPUT MEDIA HO The On Screen Display may be different from your set. Images are an example to assist with the TV operation.
MEDIAHOST MEDIAHOST Music Selection and PopUp Menu As shown , up to 8 music titles are listed per page. MEDIA HOST 1 Use the C H titles page. 2 Use M A R K button to mark or unmark a music. When one or more music files are marked, the marked musics will be played in sequence. For example, if you want to listen to only one music repeatedly, just mark the music only and play it. If no music is marked, all the music in the folder will be played in sequence.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL TV INPUT STB MEDIA HO TV INPUT TV INPUT This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed. ■ RGB-PC input source use 4:3 or 16:9 aspect ratio. ■ DTV, CADTV, HDMI, or DVI input source use J u s t S c a n.
PICTURE CONTROL Set by program Zoom 1 Selects the proper picture proportion to match the source’s image. Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. (4:3 4:3) (16:9 16:9) Zoom 1 Set By Program Set By Program PICTURE CONTROL 4:3 Zoom 2 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio.
PRESET PICTURE SETTINGS Picture Mode - Preset BACK Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the Picture Mode menu based on the program category. I n t e l l i g e n t E y e, D y n a m i c, S t a n d a r d, M i l d Settings are preset for the optimum picture quality at the factory and are not adjustable. In the U s e r 1 and U s e r 2 modes only, user can directly adjust the contrast, brightness, color, sharpness, tint.
PICTURE CONTROL TV INPUT TV INPUT TV INPUT Color Tone - Preset STB MEDIA HO ST STB STB MEDIA HO ST Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. When selecting Picture Mode options (Dynamic, Standard and Mild), C o l o r T e m p e r a t u r e is automatically change. When selecting Picture Mode options (User 1 and User 2), you can choose the C o l o r T e m p e r a t u r e.
MANUAL PICTURE ADJUSTMENT TV INPUT TV INPUT TV INPUT TV INPUT Picture Mode - User Mode STB MEDIA HO ST STB STB MEDIA HO ST Adjust the picture appearance to suit your preference and viewing situations. MENU BRIGHT TIMER 1 Press the M E N U button and then use to select the P I C T U R E menu.
PICTURE CONTROL TV INPUT TV INPUT TV INPUT Color Tone - User Mode STB MEDIA HO ST STB STB MEDIA HO ST You can also adjust the detailed settings (Red, Green, Blue) by selecting the C o l o r T e m p e r a t u r e - U s e r menu. This feature operate only if the picture mode set U s e r 1 or U s e r 2. T BRIGH MENU - TIMER 1 Press the M E N U button and then use to select the P I C T U R E menu.
XD - PICTURE IMPROVEMENT TECHNOLOGY TV INPUT TV INPUT TV INPUT TV INPUT XD is LG Electronic’s unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. When selecting Picture Mode options (Dynamic, Standard, and Mild), XD is automatically changed to Auto. When selecting Picture Mode options (User 1 and User 2), you can choose the Auto / Manual. When selecting the Manual, you can adjust the XD Contrast, XD color and XD Noise.
PICTURE CONTROL ADVANCED - CINEMA 3:2 PULL DOWN MODE TV INPUT TV INPUT TV INPUT Set up the TV for the best picture appearance for viewing movies. STB MEDIA HO ST STB STB MEDIA HO ST MENU BRIGHT TIMER 1 Press the M E N U button and then use to select the P I C T U R E menu. D or E button MEDIA HO ST When you operate Cinema 3:2 Mode (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display.
ADVANCED - BLACK (DARKNESS) LEVEL TV INPUT TV INPUT TV INPUT TV INPUT Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature operates only in AV1, AV2, HDMI1, HDMI2, or HDMI3 mode. STB MEDIA HO ST STB STB MEDIA HO ST MENU BRIGHT TIMER 1 Press the M E N U button and then use to select the P I C T U R E menu.
PICTURE CONTROL PICTURE RESET TV INPUT TV INPUT TV INPUT Use to quickly reset all the Picture menu options to their original factory preset values. STB MEDIA HO ST STB STB MEDIA HO ST ST MENU BRIGHT TIMER 1 Press the M E N U button and then use to select the P I C T U R E menu.
IMAGE STICKING MINIMIZATION (ISM) METHOD - Plasma TV only TV INPUT TV INPUT TV INPUT TV INPUT A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image. Use our unique method to minimize any fixed image on the screen. STB MEDIA HO ST STB STB MEDIA HO ST MENU BRIGHT 1 Press the M E N U button and then use to select the O P T I O N menu. D or E 2 Press the G button and then use select I S M M e t h o d.
PICTURE CONTROL LOW - POWER PICTURE MODE - Plasma TV only TV INPUT TV INPUT TV INPUT Low power reduces the plasma display power consumption. STB MEDIA HO ST STB STB MEDIA HO ST ST MENU BRIGHT TIMER Language 1 Press the M E N U button and then use to select the O P T I O N menu.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELLER (AUTO VOLUME) TV INPUT TV INPUT TV INPUT TV INPUT Scans for changes in sound levels during commercials, then adjusts the sound to match the specified audio level. Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. STB MEDIA HO ST STB STB MEDIA HO ST MENU BRIGHT TIMER Sound Mode 1 Press the M E N U button and then use to select the A U D I O menu.
PRESET SOUND SETTINGS (SOUND MODE) BACK PICTURE SOUND MARK USB EJECT SAP BACK CC PICTURE SOUND MARK USB EJECT Sound Mode lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content. S t a n d a r d, M u s i c, M o v i e, and S p o r t s are preset for good sound quality at the factory and are not adjustable.
SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. 1 2 Press the M E N U button and then use to select the A U D I O menu. Press the G button and then use select S o u n d M o d e. D D or or E E button Sound Mode : Standard Auto Volume : On Balance :0 TV Speaker : On button to 1 3 4 Press the G button and then use select U s e r.
SOUND &LANGUAGE CONTROL BALANCE TV INPUT TV INPUT TV INPUT Adjust the left/right sound of speaker to suit your taste and room situations. STB MEDIA HO ST STB STB MEDIA HO ST ST MENU BRIGHT TIMER 1 Press the M E N U button and then use to select the A U D I O menu. BACK SOUND & LANGUAGE CONTROL 2 Press the G button and then use select B a l a n c e.
TV SPEAKERS ON/OFF SETUP TV INPUT TV INPUT TV INPUT TV INPUT Turn the TV speakers off if using external audio equipment. Feature turns the TV Speakers option On or Off. STB MEDIA HO ST STB STB MEDIA HO ST MENU BRIGHT TIMER 1 2 Press the M E N U button and then use to select the A U D I O menu.
SOUND &LANGUAGE CONTROL STEREO/SAP BROADCAST SETUP This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal as well as the original one and when you select Stereo or SAP on the remote control. Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected.
AUDIO LANGUAGE TV INPUT TV INPUT TV INPUT TV INPUT Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. STB MEDIA HO ST STB STB MEDIA HO ST MENU BRIGHT TIMER Language 1 Press the M E N U button and then use to select the O P T I O N menu.
SOUND &LANGUAGE CONTROL ON-SCREEN MENUS LANGUAGE SELECTION TV INPUT TV INPUT TV INPUT The menus can be shown on the screen in the selected language. First select your language. STB MEDIA HO ST STB STB MEDIA HO ST ST MENU BRIGHT TIMER Language 1 Press the M E N U button and then use to select the O P T I O N menu. BACK SOUND & LANGUAGE CONTROL 2 Press the G button and then use select L a n g u a g e .
SAP BACK CAPTION MODE BACK BACK BACK CC SAP PICTURE CC PICTURE SOUND PICTURE SOUND MARK USB EJECT SAP CC CC MARK Caption must be provided to help people with hearing loss watch TV. MARK 1 When selecting O f f, Sub-menus for Analog, DTV, and Digital Option become disabled. Press E X I T to save and return to TV viewing. You can also adjust C a p t i o n in the OPTION menu.
SOUND &LANGUAGE CONTROL TV INPUT T TV INPUT TV INPUT Analog Broadcasting System Captions STB MEDIA HO ST STB STB MEDIA HO ST ST Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.
TV INPUT TV INPUT TV INPUT TV INPUT Digital Broadcasting System Captions STB MEDIA HO ST STB STB MEDIA HO ST Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On. MENU BRIGHT TIMER Language 1 Press the M E N U button and then use to select the O P T I O N menu.
SOUND &LANGUAGE CONTROL TV INPUT T TV INPUT TV INPUT Caption Option STB MEDIA HO ST STB STB MEDIA HO ST ST Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is set On. 1 Press the M E N U button and then use to select the O P T I O N menu. D or E BRIGHT Press the G button and then use select C a p t i o n.
TIME SETTING CLOCK SETTING TV INPUT TV INPUT TV INPUT Auto Clock Setup STB MEDIA HO ST TV INPUT STB STB MEDIA HO ST The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function. MENU BRIGHT TIMER 1 Press the M E N U button and then use to select the T I M E menu.
TV INPUT TV INPUT TV INPUT Manual Clock Setup STB MEDIA HO ST STB STB MEDIA HO ST If the current time setting is wrong, reset the clock manually. ST MENU BRIGHT TIMER 1 Press the M E N U button and then use to select the T I M E menu. D or E Clock button MEDIA HO BRIGH T+ RATIO LINK SIMP : Oct 19, 2007, 03:44 AM Off Time : Off On Time : Off Sleep Time : Off Auto Sleep : Off BACK 2 Press the G button and then use select C l o c k.
AUTO ON/OFF TIMER SETTING TV INPUT TV INPUT TV INPUT TV INPUT This function operates only if the current time has been set. The O f f T i m e function overrides the O n T i m e function if they are both set to the same time. The TV must be in standby mode for the O n T i m e to work. If you do not press any button within 2 hours after the TV turns on with the O n T i m e function, the TV will automatically revert to standby mode.
TIME SETTING SLEEP TIMER SETTING TV INPUT TV INPUT ND The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off.
AUTO SHUT-OFF SETTING TV INPUT TV INPUT TV INPUT TV INPUT TV will be automatically turned off, in case of No Signal for 10 minutes. STB MEDIA HO ST STB STB MEDIA HO ST MENU BRIGHT TIMER Clock 1 Press the M E N U button and then use to select the T I M E menu. D or E button MEDIA HO ST RATIO BRIGH T+ LINK SIMP : Oct 19, 2007, 03:44 AM Off Time : Off On Time : Off Sleep Time : Off Auto Sleep : Off BACK BACK 2 Press the G button and then use select A u t o S l e e p.
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1.
Set Password Change the password by inputting a new password twice. For USA 1 2 3 After inputting the password, use the D or E button to choose S e t p a s s w o r d. Press the G button and then choose any 4 digits for your new password. As soon as the 4 digits are entered, re-enter the same 4 digits on the C o n f i r m. Then your changed password has been memorized. Press E X I T button to return to TV viewing or press M E N U button to return to the previous menu.
PARENTAL CONTROL /RATINGS CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. Lock System Set Password Block Channel 1 After inputting the password, use the to choose B l o c k C h a n n e l. D or E button G Selection ( G or ) leads you to the block channel screen. Movie Rating TV Rating-Children TV Rating-General Input Block 2 Press the G button. You will now see a screen filled with channel numbers and a preview picture.
MOVIE & TV RATING TV INPUT TV INPUT TV INPUT TV INPUT Movie Rating (MPAA) - for USA only STB MEDIA HO ST STB STB MEDIA HO ST Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.
PARENTAL CONTROL /RATINGS TV Rating Children - for USA only Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs.
TV Rating English - for CANADA only Selecting canadian english language rating system. 1 After inputting the password, use the choose T V R a t i n g - E n g l i s h. 2 Press the G button and then use the D or E button to select E , C , C 8 +, G , P G, 1 4 +, 1 8 +, or B l o c k i n g O f f.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries.
The audio function does not work. Press the VOL or VOLUME button. ■ Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers Unusual sound from inside the product ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
PRODUCT SPECIFICATIONS ■ The specifications shown above may be changed without prior notice for quality improvement. MODELS Including stand 50PB4DA (50PB4DA-UA) 44.5 x 30.2 x 12.2 inches 51.5 x 35.7 x 14.6 inches 60PB4DA (60PB4DA-UA) 60.9 x 41.8 x 17.6 inches 1130.0 x 768.1 x 310.4mm 1308.0 x 906.1 x 370.0 mm 1548.0 x 1061.0 x 448.0 mm Dimensions (Width x Height x Depth) 42PB4DA (42PB4DA-UA) Excluding stand 44.5 x 28.1 x 3.3 inches 51.5 x 33.3 x 3.5 inches 60.9 x 38.9 x 3.9 inches 1130.0 x 715.
APPENDIX MODELS Including stand 31.7 x 24.4x 11.2 inches 805.8 x 619.7 x 283.8 mm Dimensions (Width x Height x Depth) 32LB9D (32LB9D-UJ) Excluding stand 31.7 x 21.8 x 3.1 inches 805.8 x 554.1 x 79.0 mm Weight including stand 32.6 pounds / 14.8 kg excluding stand 27.8 pounds / 12.
PROGRAMMING THE REMOTE CONTROL The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands. Programming a code into a remote mode 1 To find out whether your remote control can operate each device without programming, turn on the device (such as a VCR) and press the corresponding mode button on the remote. After that, press the POWER button.
APPENDIX Remote Control Code VCR Brand AIWA AKAI APPENDIX 96 Codes 034 016 125 AMPRO 072 ANAM 031 AUDIO DYNAMICS 012 BROKSONIC 035 CANON 028 CAPEHART 108 CRAIG 003 CURTIS MATHES 031 DAEWOO 005 065 112 DAYTRON 108 DBX 012 DYNATECH 034 ELECTROHOME 059 EMERSON 006 029 036 129 FISHER 003 FUNAI 034 GE 031 107 GO VIDEO 132 HARMAN KARDON HITACHI 004 043 INSTANTREPLAY 031 JCL 031 JCPENNY 012 040 JENSEN 043 JVC 012 048 130 KENWOOD 014 047 LG (GOLDSTAR) 001 101 LLOYD 034 LXI 003 017 MAGIN 040 Brand Codes Brand
Cable Box Brand Codes ABC 003 046 AJIN 112 ANTRONIK 014 ARCHER 005 CABLE STAR 026 CENTURION 092 CENTURY 007 CITIZEN 007 COLOUR VOICE 065 COMBANO 080 COMTRONICS 019 DIAMOND 023 EAGLE 020 EASTERN 057 ELECTRICORD 032 GE 072 GEMINI 008 GI 052 GOLDEN CHANNEL 030 HAMLIN 049 HITACHI 052 HOSPITALITY 070 JERROLD 002 009 Brand 004 039 042 052 053 007 014 024 LG (GOLDSTAR) M-NET MACOM MAGNAVOX MEMOREX MOVIE TIME NSC 090 081 030 OAK PANASONIC PARAGON 030 040 062 066 PHILIPS 022 025 054 074 050 055 055 077 0
APPENDIX Audio Brand Codes AIWA APPENDIX 014 125 230 AKAI 163 ANAM 003 059 217 BURMECTER 252 CARVER 086 CLARION 199 DAEWOO 027 102 DENON 015 FANTASIA 071 FINEARTS 022 FISHER 089 LG(GOLDSTAR) 001 087 190 211 HAITAI 034 HARMAN/KARDON JVC 004 KEC 185 KOHEL 030 NAD 045 KENWOOD 038 170 215 INKEL 037 078 122 152 Brand Codes Brand Codes RCX REALISTIC SAMSUNG 092 103 124 193 204 011 019 106 031 072 156 206 005 044 118 012 076 162 166 205 QUASAR RCA 157 189 225 247 014 100 175 179 201 214 238 103 111 002
IR CODES 1. How to Connect ■ Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes ■ Output waveform Single pulse, modulated with 37.
APPENDIX (Hexa) Code Function Note 0F TV INPUT Remote control Button 0B INPUT Remote control Button 08 POWER Remote control Button (Power On/Off) D4 79 RATIO Remote control Button 0E TIMER Remote control Button 10-19 Number Key 0-9 Remote control Button 4C - (Dash) Remote control Button 1A BACK Remote control Button 09 MUTE Remote control Button 02 VOL D Remote control Button 03 VOL E Remote control Button 00 CH D Remote control Button 01 CH E Remote control Button
EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. ■ Note: RS-232C on this unit is intended to be used with third party RS-232 control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software.
APPENDIX RS-232C Configurations Either cable below can be used.
Command Reference List COMMAND1 COMMAND2 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Color 10. Tint 11. Sharpness 12. OSD Select k k k k k k k k k k k k a b c d e f g h i j k l COMMAND1 COMMAND2 DATA (Hexadecimal) 0~1 0~9 (G p.104) 0~1 0~1 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0~1 COMMAND1 COMMAND2 13. Remote Control Lock Mode 14. Treble 15. Bass 16. Balance 17. Color Temperature 18. Red Adjustment 19.
APPENDIX 01. Power (Command2:a) 05. Volume Mute (Command2:e) To control Power On/Off of the TV. To control volume mute on/off. Transmission [k][a][ ][Set ID][ ][Data][Cr] You can also adjust mute using the MUTE button on remote control. Data 0: Power Off Data 1: Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function.
09. Color (Command2:i) 15. Bass (Command2:s) To adjust the screen color. To adjust bass. You can also adjust color in the Picture menu. You can also adjust bass in the Audio menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Transmission [k][s][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) *Refer to ‘Real data mapping 1’. See page 104. *Refer to ‘Real data mapping 1’. See page 104.
APPENDIX 20. Blue Adjustment (Command:$) To adjust blue in color temperature. Transmission [k][$][ ][Set ID][ ][Data][Cr] Data Min:0 ~ Max:C8 *Refer to ‘Real data mapping 2’. See page 105. Acknowledgement [$][ ][Set ID][ ][OK/NG][Data][x]] 21. ISM Method (Command2:p) (Only Plasma TV model) To avoid having a fixed image remain on screen. Transmission [ j ][p][ ][Set ID][ ][Data][Cr] Data 1: Inversion 4: White Wash 2: Orbiter 8: Normal Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x] 22.
Data5: 7 Main/Sub Picture 6 Two/One Part Channel 5 Using Physical Channel 4 3 2 1 0 Step NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved ... Reserved Reserved 0 Main 0 Two 0 Use x 0 0 0 0 1 Sub 1 One 1 No Use x 0 0 0 1 x 0 0 1 0 x 0 0 1 1 x 0 1 0 0 x 0 1 0 1 x 0 1 1 0 x 0 1 1 1 x x x x x x 1 1 1 1 The table above lists the binary code which must be converted to Hexadecimal before sending.
