User's Manual

Typhoon Wireless Office Desktop

Article No.: 40620

All specifications and information are subject to changes without further notices

Commands in the Menu

If you right-click on KeyMaestro icon on taskbar, a menu will pop up with the following

commands.



Configure

Click on this command, a customization dialogue box will pop up with following functions.

1. Select a Hotkey

This function contains the default function of a key. You can click on "Display Label" to

re-define the key functions. When you click it, a Configure Button box will appear.

* Label

In "Button Label" box, type the name of application that the button will launch, or any

name that will help you remember the function of the button. This label will appear on

screen each time you press the button.

* Functions

You can see a list of pre-defined functions and set one of it for the button.

* Launch Application or Website

Type in the path to an often-used application or click the Browse button to select any

file in your computer. If you want to attach a web page to the button, just simply type in

the website address in the dialogue box.

* Combination Key

In many Windows application, there are many hot keys to execute some often-used

commands. Some of the hot keys are combined with two keys pressed simultaneously,

and some are three. It is not easy to press and to remember those hot keys. Now you

can define those complicated hot keys you always forgot. Any kind of combination is

available. For example,

[Alt] + [F4] = close window,

[Ctrl] + [A] = select all.

* String

You may define the button as a string of texts that needs to be input often. The

maximum characters are 500. Taking good advantages of this function can save much

your text input time and makes your works more efficient.

2. Enable Display Label

This command is to show or hide OSD (On Screen Display). When OSD is enabled,

each time you press any one of the multimedia buttons, its function name (button label)

will show on the right-bottom corner on the screen. The default of this function is enabled.

3. Enable Taskbar Icon

This command is to show or hide taskbar driver icon. When the function is enabled, you

can see a driver icon

its function name (button label) will show on the right-bottom

corner of the screen. If you want to reload it again, you can select Start => Program =>