Buying Guide

1
Prep Uncoated Wood or Concrete*
Remove old or peeling coatings

Clean with wood cleaner such as
No. 63 All-In-One Wood Cleaner
Rinse and allow wood to dry
completely prior to applying coating
2 3
RESURFACES PROPERLY PREPARED
WEATHERED WOOD AND CONCRETE
®
Smooth Finish
Textured or Extra Textured Finish
ALWAYS Prepare Surface Before Coating
Apply ADVANCED  Coating*
 Apply 1st coat at 75 sq. ft. per gallon Apply 2nd coat at 75 sq. ft. per gallon
4 5 6
*
See product label for more details
behr.com
Have a coating or
product question?
Visit behr.com or call
1-800-854-0133 Ext. 2 (U.S.).
©2018 Behr Process Corporation • 1801 St. Andrew Place • Santa Ana, CA 92705 U.S.A. C-DECK-OVER Item No. 50003180
REV. 12/18
U|xaICEHEy00223kzU

1/2" Nap Roller Cover
(for Smooth & Textured DECKOVER)
Painter’s Tape
Roller Frame & Extension Pole
Extra Textured Roller Cover
(for Extra Textured nish)
Stir Stick & Paint Tray
Protective Equipment (gloves, goggles, etc.)
Plastic Watering Can
Stiff Bristle Brush
Drop Cloth
Nylon/Polyester Brush
Hose or Pressure Washer
Wood or Concrete Cleaners
Concrete Surfaces: Paint Stripper
to Remove Failing Coating (if necessary)
Wood Surfaces: Stripper such as
BEHR PREMIUM® Wood Stain & Finish Stripper to
Remove Failing Coating (if necessary)
Cover Photo Deck (top left) - Dark Walnut PFC-25, Deck (bottom left) - Cape Cod Gray SC-365, Dancing (bottom right) - Redwood SC-330
ADHESION
•
CRACKING
RESISTANCE
NOW
DECKOVER
ADVANCED