Use and Care Manual

ManualsBrandsBEHR Premium Plus ManualsPaint1-gal. Stain-Blocking Primer and Sealer Interior

*LIFETIME LIMITED WARRANTY Behr Process Corporation warrants to the original residential

consumer purchaser the performance of this product as described on this label for so long as

you reside in your home. THIS WARRANTY IS NOT VALID WHEN THE PRODUCT IS NOT PROPERLY

APPLIED TO A PROPERLY PREPARED SURFACE OR CARED FOR IN ACCORDANCE WITH THE LABEL

DIRECTIONS. This warranty is not transferable. If this product is found not to perform as speciﬁed

upon inspection by our representative during the warranty period, Behr Process Corporation

will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish

an equivalent amount of new product or refund the original purchase price of this product to

you. This warranty excludes (1) labor and costs of labor for the application or removal

of any product, and (2) any incidental or consequential damages, whether based on

breach of express or implied warranty, negligence, strict liability or any other legal theory.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so

the above limitation or exclusion may not apply to you. This warranty gives you speciﬁc legal rights

and you may also have other rights, which vary from state to state.

BEHR PREMIUM PLUS

Interior

All-In-One Primer & Sealer

• Blocks Medium to Heavy Stains

• Sticks to Glossy Surfaces

• Recommended for Use

Under All Sheens

• High-Hide White

• Quick Recoat Time

• Mildew Resistant Finish

• 100% Styrene Acrylic

• Tintable up to 4 oz.

of Colorant per Gallon

• Low Odor, Zero VOC

WHERE TO USE

Over properly prepared uncoated and previous painted Interior surfaces.

Ideal for Drywall, Galvanized Metal, Vinyl, Aluminum, Wood, Concrete,

and on glossy surfaces or oil-based paint.

PREPARATION

All surfaces should be properly prepared and cleaned. Remove loose

paint, wash off chalk, dirt, and grease with detergent, rinse and allow

to dry. Remove mildew stains with a mildew stain removing product.

Scuff sand glossy surfaces and repair imperfections. Remove all dust

with a damp cloth, allow to dry. Allow new stucco, plaster and masonry

to cure for 30 days before priming.

APPLICATION

Apply when air and surface temperatures are between 50-90° F

(10-32° C). Use a high quality 3/8-1/2" nap roller cover, nylon polyester

brush or an airless sprayer (.015-.019" spray tip, 60 mesh ﬁlter). Stir

occasionally. Do not thin if using a roller or brush; however, if using a

sprayer and thinning is required, thin with water at a rate of no more

than 1/2 pint per gallon. Heavy stains may require two coats.

Spot prime patched areas ﬁrst, follow with a complete primer coat.

Bright or deep colors require a tinted primer. Have primer tinted close

to topcoat color with no more than 4 ounces of colorant per gallon.

† On stained surfaces, topcoat in 4 hours, for heavy stains, topcoat in 16 hours.

DISPOSAL

For disposal of empty containers, unused paint and soiled rags, contact

your household refuse collection service.

Visit behr.com for painting tips, project advice and color coordination

with the ColorSmart by BEHR

Tool, or download the ColorSmart by

BEHR App on your mobile device.

WARNING! If you scrape, sand or remove old paint, you may release

lead dust. LEAD IS TOXIC. Contact the National Lead Information Center

at 1-800-424-LEAD or log on to www.epa.gov/lead.

CAUTION! IRRITANT! HARMFUL IF SWALLOWED. CONTAINS: ETHYLENE GLYCOL.

MAY CAUSE EYE, NOSE AND THROAT IRRITATION. AVOID CONTACT WITH SKIN AND EYES

AND AVOID BREATHING OF VAPORS AND SPRAY MIST. WEAR EYE PROTECTION AND

PROTECTIVE CLOTHING. USE ONLY WITH ADEQUATE VENTILATION. To avoid breathing vapors

and spray mist, open windows and doors or use other means to ensure fresh air entry during

application and drying. If you experience eye watering, headaches or dizziness, increase fresh

air. If properly used, a respirator (NIOSH approved for organic vapor with P series particulate

pre-ﬁlter) may offer additional protection; obtain professional advice before using. A dust mask

does not provide protection against vapors. Avoid contact with eyes and skin. Wash thoroughly

after handling. Close container after each use. FIRST AID: If you experience difﬁculty in breathing,

leave the area to obtain fresh air. If continued difﬁculty is experienced, get medical assistance

immediately. In case of eye contact, ﬂush immediately with plenty of water for at least 15 minutes

and get medical attention; for skin, wash thoroughly with soap and water. If swallowed, get

medical attention immediately.

CAUTION: KEEP OUT OF REACH OF CHILDREN - DO NOT TAKE INTERNALLY.

WARNING! This product contains chemicals known to the state of California to cause cancer

and birth defects or other reproductive harm.

To consult with a Behr Certiﬁed Coatings Professional, call 1-800-854-0133 Ext. 2 (U.S.A. only).

No. 75 White

Santa Ana, CA 92704 U.S.A. • behr.com

V.O.C. (C.O.V.) <5 g/L • REV. 04/16

30 Min Dries to Touch

1 Hr Ready to Topcoat

†

250-400 Sq. Ft.

Coverage per Gallon

Protect

from Freezing

Soap & Water

Clean-Up