MSDS

ManualsBrandsBEHR Premium Textured DeckOver ManualsPaint5-gal. #SC-122 Redwood Wood and Concrete Coating

View (M)SDS Section :

SECTION 1 : PRODUCT AND COMPANY IDENTIFICATION

Product Name:

Premium Exterior DeckOver Texture No. 5005

Product Code:

5005

MSDS Manufacturer Number:

5005

Manufacturer Name:

BEHR Process Corporation

Address:

3400 W. Segerstrom Avenue

Santa Ana, CA 92704

General Phone Number:

(714) 545-7101

General Fax Number:

(714) 241-1002

Customer Service Phone

Number:

(800) 854-0133 ext. 2

CHEMTREC:

For emergencies in the US, call CHEMTREC: 800-424-9300

Canutec:

In Canada, call CANUTEC: (613) 996-6666 (call collect)

MSDS Creation Date:

February 28, 2014

MSDS Revision Date:

February 28, 2014

(M)SDS Format:

According to ANSI Z400.1-2004

NFPA

1 0

HMIS

Health Hazard

Fire Hazard

Reactivity

Personal

Protection

SECTION 2 : COMPOSITION/INFORMATION ON INGREDIENTS

Chemical Name

CAS#

Ingredient Percent

Glass, oxide; Glass

65997-17-3

1 - 5 by weight

Silica, crystalline - quartz

14808-60-7

0.1-1 by weight

Water

7732-18-5

30-60 by weight

2-ethylhexyl benzoate

5444-75-7

1 - 5 by weight

Sepiolite Clay

63800-37-3

1-5 by weight

Silicate, mica

12001-26-2

1-5 by weight

SECTION 3 : HAZARDS IDENTIFICATION

Emergency Overview:

Irritant.

Summary of content (6 pages)

PAGE 1
View (M)SDS Section : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 SECTION 1 : PRODUCT AND COMPANY IDENTIFICATION Product Name: Premium Exterior DeckOver Texture No. 5005 Product Code: 5005 MSDS Manufacturer Number: 5005 Manufacturer Name: BEHR Process Corporation Address: 3400 W. Segerstrom Avenue Santa Ana, CA 92704 General Phone Number: (714) 545-7101 General Fax Number: (714) 241-1002 Customer Service Phone Number: (800) 854-0133 ext.
PAGE 2
Potential Health Effects: Eye: May cause irritation. Skin: May cause irritation. Inhalation: Prolonged or excessive inhalation may cause respiratory tract irritation. Ingestion: May be harmful if swallowed. May cause vomiting. Chronic Health Effects: Prolonged or repeated contact may cause skin irritation. Signs/Symptoms: Overexposure may cause headaches and dizziness. Target Organs: Eyes. Skin. Respiratory system. Digestive system.
PAGE 3
Personnel Precautions: Use proper personal protective equipment as listed in section 8. Environmental Precautions: Avoid runoff into storm sewers, ditches, and waterways. Spill Cleanup Measures: Absorb spill with inert material (e.g., dry sand or earth), then place in a chemical waste container. Provide ventilation. Clean up spills immediately observing precautions in the protective equipment section. SECTION 7 : HANDLING and STORAGE Handling: Use with adequate ventilation.
PAGE 4
Density: 10 - 12 Lbs./gal. Vapor Density: Greater than 1 (Air = 1). pH: 8.5 to 9.5 Molecular Formula: Mixture Molecular Weight: Mixture Flash Point: No Data VOC Content: Material VOC: 25 gm/l (Includes Water) Coating VOC.: 46 gm/l (Excludes Water) SECTION 10 : STABILITY and REACTIVITY Chemical Stability: Stable under normal temperatures and pressures. Hazardous Polymerization: Not reported.
PAGE 5
Waste Disposal: Consult with the US EPA Guidelines listed in 40 CFR Part 261.3 for the classifications of hazardous waste prior to disposal. Furthermore, consult with your state and local waste requirements or guidelines, if applicable, to ensure compliance. Arrange disposal in accordance to the EPA and/or state and local guidelines.
PAGE 6
Canada DSL: Listed SECTION 16 : ADDITIONAL INFORMATION MSDS Creation Date: February 28, 2014 MSDS Revision Date: February 28, 2014 MSDS Author: Actio Corporation Disclaimer: This Health and Safety Information is correct to the best of our knowledge and belief at the date of its publication but we cannot accept liability for any loss, injury or damage which may result from its use.