Buying Guide
1
Prep Uncoated Wood or Concrete*
Clean with wood cleaner such as
No. 63 All-In-One Wood Cleaner
Clean and etch concrete Allow 24 hours dry time
2
BRINGS NEW LIFE TO
OLD WOOD & CONCRETE
®
Smooth
Textured
Extra Textured
Project Tips
Apply DeckOver Coating*
Prell cracks
Apply 1st coat at 75 sq. ft. per gallon
Apply 2nd coat at 75 sq. ft. per gallon
3 4 5
*
See product label for more details
behr.com
Have a coating or
product question?
Visit behr.com or call
1-800-854-0133 Ext. 2 (U.S.).
©2016 Behr Process Corporation • 3400 W. Segerstrom Ave. • Santa Ana, CA 92704 U.S.A. • behr.com C-DECK-OVER Item No. 50003180
REV. 9/16
U|xaICEHEy00223kzU
DECK
OVER
Project Checklist
1/2" Nap Roller Cover
(for Smooth & Textured DECKOVER)
Painter’s Tape
Roller Frame & Extension Pole
DECKOVER
®
Extra Textured Roller Cover
(for Extra Textured DECKOVER)
Stir Stick & Paint Tray
Protective Equipment (gloves, goggles, etc.)
Plastic Watering Can
Stiff Bristle Brush
Drop Cloth
Nylon/Polyester Brush
Hose or Pressure Washer
Wood or Concrete Cleaners (see steps above)
Concrete Surfaces: Paint Stripper
to Remove Failing Coating (if necessary)
Wood Surfaces: Stripper such as
BEHR PREMIUM® Wood Stain & Finish Stripper to
Remove Failing Coating (if necessary)
Cover Photo Deck (top left) — California Rustic SC-130, Walkway (bottom left) — Flat Top PFC-65, Roller Cover (bottom right) — Redwood SC-330