TDS

TECHNICAL DATA SHEET
This information is provided "as is" and no representations or warranties, either expressed or implied, of merchantability, tness for a particular purpose or of any other
nature are made with respect to this information or to any product referred to in this information. For SDS or to consult with a Behr Certied Coatings Professional,
call 1-800-854-0133 Ext. 2 (U.S.A. only). ©2016 Behr Process Corporation Santa Ana, CA 92704 U.S.A.
Revised 10/2016
2 of 2
CAUTIONS/LIMITATIONS:
• Protect from freezing.
• Do not use on garage oors and driveways.
• For best results, apply at temperatures between 50°F - 90°F.
Temperatures above 90°F may aect the application such
as drying too fast. Avoid painting in direct sun. NOTE: If the
surface is hot to the touch it should be considered too hot to
apply this coating.
• Avoid heavy trac for 24 hours.
• Allow four weeks before washing or cleaning for full cure.
• Shelf life under normal conditions is two years unopened.
GENERAL INFORMATION:
Warning! Causes eye and skin irritation. Harmful if
swallowed. Wear protective clothing, gloves, eye, and face
protection. Do not eat, drink, or smoke when using this
product. Take o contaminated clothing and wash it before
reuse. Wash hands thoroughly after handling. Collect spillage
and avoid release to the environment. Dispose of unused,
contents, container and other contaminated wastes in
accordance with local, state, federal and
provincial regulations.
First aid: If in eyes: Rinse cautiously with water for several
minutes and remove contacts if present and easy to do.
Continue rinsing and get medical attention if eye irritation
persists. If on skin: Wash with plenty of soap and water.
If swallowed: Rinse mouth and get medical attention
if you feel unwell.
EXTERIOR ELASTOMERIC MASONRY, STUCCO & BRICK PAINT
NO. 68 WHITE