Specification

TECHNICAL DATA SHEET
This information is provided "as is" and no representations or warranties, either expressed or implied, of merchantability, tness for a particular purpose or of any other
nature are made with respect to this information or to any product referred to in this information. For MSDS or to consult with a Behr Certied Coatings Professional,
call 1-800-854-0133 Ext. 2 (U.S.A. only). ©2014 Behr Process Corporation Santa Ana, CA 92704 U.S.A.
Revised 11/2015
2 of 2
Corrosion Resistance:
Test Method: ASTM G85 Annex #5, 1,000 hours
Result: Rating 10 per ASTM D714 for blistering
Rating 9 per ASTM D610 for rusting
Less than 2mm rust creep from scribe
Dry Heat Resistance:
Test Method: ASTM D2485 (300°F)
Result: Pass
Flexibility:
Test Method: ASTM D522, 180° bend, 1/8” mandrel
Result: Pass
Moisture Condensation Resistance:
Test Method: ASTM D4585, 100°F, 1,000 hours
Result: Pass
Pencil Hardness:
Test Method: ASTM D3363
Result: 2B
Block Resistance:
Test Method: ASTM D2793, aluminum, class III
Result: B0
Mar Resistance:
Test Method: ASTM D5178 CRS
Result: 5.0 kg
Chemical Resistance:
Test Method: ASTM D1308, 1hr unless noted.
50% Sulphuric Acid
10% Hydrochloric Acid
5% Phosphoric Acid
25% Sodium Hydroxide
Aliphatic Hydrocarbon Solvent, 2hr
Methyl Alcohol
Motor Oil (10W30), 2hr Vegetable Oil, 2hr
Result: no lm defects
CLEAN UP:
Clean all tools and equipment with clean water. For disposal
of empty containers and unused product, contact your
household refuse collection service.
CAUTIONS/LIMITATIONS:
• Protect from freezing.
• Do not use on oors.
• Do not use when air and surface temperatures are below
50°F and above 90°F or for exterior when precipitation is
expected within 24 hours after project completion.
• Avoid heavy trac for 24 hours.
• Allow 4 weeks before washing or cleaning for full cure.
• Shelf life under normal conditions is 2 years unopened.
• High tint load colors, such as safety and or deep base
colors, may impact nal lm properties. A primer such as
BEHR PREMIUM PLUS® Exterior Multi-Surface Primer &
Sealer NO. 436 is recommended for best results.
• Not for use on baked surfaces.
GENERAL INFORMATION:
Warning! Causes eye and skin irritation. Wear protective
clothing, gloves, eye, and face protection. Do not eat, drink,
or smoke when using this product. Take o contaminated
clothing and wash it before reuse. Wash hands thoroughly
after handling. Dispose of unused, contents, container and
other contaminated wastes in accordance with local, state,
federal and provincial regulations.
First aid: If in eyes: Rinse cautiously with water for several
minutes and remove contacts if present and easy to do.
Continue rinsing and get medical attention if eye irritation
persists. If on skin: Wash with plenty of soap and water.
If swallowed: Rinse mouth and get medical attention
if you feel unwell.
INTERIOR/EXTERIOR DIRECTTOMETAL SEMIGLOSS PAINT
NO. 3200 WHITE