Use and Care Manual

Urethane Alkyd Semi-Gloss Enamel
• Professional Quality Interior/Exterior Semi-Gloss Finish
• Excellent Flow & Leveling
• Less Odor than Oil-base Paint
• Easy Water Clean-up
• Durable Hard Finish
• Easy Stain Removal
• Mildew Resistant Finish
NO. 3900 White
NO. 3930 Deep Base
WHERE TO USE
Properly prepared Interior/Exterior metal & wood surfaces. Ideal for
Doors, Trim, Molding, Cabinetry, Plaster, Masonry, Cinder Block,
Well-bonded Wallpaper, Brick, Stucco, Aluminum and Wrought Iron.
Do not use on horizontal surfaces subject to foot traffic.
PREPARATION
†
(Proper surface preparation is required.) Allow new stucco, plaster
and masonry to cure for 30 days. For interior and exterior surfaces,
remove dirt, oil and grease stains with a Concrete & Masonry Degreaser
& Cleaner. Remove mildew stains with a mildew stain removing
product. Remove all loose and peeling paint; scuff sand glossy surfaces;
caulk; repair imperfections and sand smooth. For exterior surfaces,
power wash to remove chalk. Etch galvanized metal with a Concrete &
Masonry Cleaner & Etcher. Follow all label instructions.
PRIME
Interior: On interior surfaces with heavy stains, galvanized metal or
wrought iron, use a product such as BEHR PREMIUM PLUS
®
NO. 75
Stain-Blocking Primer & Sealer. Exterior: On exterior surfaces with
heavy stains, wood or metal, use a product such as BEHR PREMIUM PLUS
NO. 436 Multi-Surface Primer & Sealer. Follow all label instructions.
APPLICATION
DO NOT THIN. Stir before and during application. When working with
more than one can of the same product, intermix to ensure color
uniformity. Use adequate ventilation during application and drying
process. Certain colors may require 2 or more coats to achieve
complete hide and coverage. Use product when air and surface
temperatures are 50-90˚F (10-32˚C). Apply a thin coat using a high
quality synthetic brush, 1/4"-3/8" nap roller or an airless sprayer
(.013"-.017" spray tip). NOTE: If touch-up is necessary, same
application method is recommended.
DRY TIME
Longer dry time required in cooler temperatures and higher humidity.
Wait at least 7 days before rinsing or cleaning the surface with a mild,
non-abrasive detergent.
DISPOSAL
Properly dispose of all soiled rags. For disposal of empty containers and
unused product, contact your household refuse collection service.
† WARNING If you scrape, sand or remove old paint, you may release lead
dust. LEAD IS TOXIC Contact the National Lead Information Center at
1-800-424-LEAD or log on to www.epa.gov/lead
.
WARNING Sanding or scraping pressure treated lumber may be
hazardous; wear appropriate protection.
To consult with a Behr Certified Coatings Professional, call 1-800-854-0133 Ext. 2 (U.S.A. only).
©2019 Behr Process Corporation
Santa Ana, CA 92705 U.S.A. • behr.com
V.O.C. <50 g/L • REV. 11/18
2 Coats Recommended
for Optimal Durability
Soap & Water
Clean-Up
Dry Time:
2-4 Hr. Dry to Touch
4-8 Hr. Recoat
Spread Rate:
Rough 350-400 Sq. Ft.
Smooth 500-550 Sq. Ft.
WHITE BASE: READY TO USE OR ADD TINTING COLORANTS.
MEDIUM & DEEP BASE: DO NOT USE WITHOUT THE ADDITION OF TINTING COLORANTS.
*LIMITED WARRANTY
For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr
Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and
specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process Corporation
will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund
the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any
product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict
liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of
merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on
how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have
other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations,
are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr
Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
CAUTION IRRITANT MAY CAUSE EYE, NOSE AND THROAT
IRRITATION. AVOID CONTACT WITH SKIN AND EYES AND AVOID
BREATHING OF VAPORS AND SPRAY MIST. WEAR EYE PROTECTION
AND PROTECTIVE CLOTHING. USE ONLY WITH ADEQUATE VENTILATION.
To avoid breathing vapors and spray mist, open windows and doors or use other means
to ensure fresh air entry during application and drying. If you experience eye watering,
headaches or dizziness, increase fresh air. If properly used, a respirator (NIOSH approved
for organic vapor with P series particulate pre-filter) may offer additional protection; obtain
professional advice before using. A dust mask does not provide protection against vapors.
Avoid contact with eyes and skin. Wash thoroughly after handling. Close container after each
use. FIRST AID: If you experience difficulty in breathing, leave the area to obtain fresh air.
If continued difficulty is experienced, get medical assistance immediately. In case of eye contact,
flush immediately with plenty of water for at least 20 minutes and get medical attention; for
skin, wash thoroughly with soap and water. If swallowed, get medical attention immediately.
CAUTION: KEEP OUT OF REACH OF CHILDREN – DO NOT TAKE INTERNALLY.
WARNING Cancer and Reproductive Harm – www.P65Warnings.ca.gov.