MSDS

ManualsBrandsBEHR Premium ManualsPaint1-gal. #500 Natural Transparent Weatherproofing Wood Finish

View MSDS

Section :

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION

Product Name: Premium Transparent Deck, Fence & Siding

Weatherproofing Wood Finish No. 500

MSDS Manufacturer

Number:

500

Manufacturer Name: BEHR Process Corporation

Address: 3400 W. Segerstrom Avenue

Santa Ana, CA 92704

General Phone Number: (714) 545-7101

General Fax Number: (714) 241-1002

Customer Service Phone

Number:

(800) 854-0133 ext. 2

CHEMTREC: For emergencies in the US, call CHEMTREC: 800-424-9300

Canutec: In Canada, call CANUTEC: (613) 996-6666 (call collect)

MSDS Creation Date: January 30, 2007

MSDS Revision Date: September 30, 2010

MSDS Format: According to ANSI Z400.1-2004

NFPA

HMIS

Health Hazard

Fire Hazard 1

Reactivity 0

Personal

Protection

* Chronic Health Effects

SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS

Chemical Name CAS# Ingredient Percent

Non hazardous ingredient(s) Not applicable

60 - 100 by weight

Silicon dioxide, chemically prepared 112926-00-8

1 - 5 by weight

Ethylene glycol 107-21-1

1 - 5 by weight

C.I. Pigment Yellow 42 (Iron oxide) 51274-00-1 1 - 5 by weight

Propylene glycol 57-55-6

1 - 5 by weight

Undisclosed/Proprietary No data

1 - 5 by weight

Acrylic polymer(s) Not Hazardous 10 - 30 by weight

SECTION 3 - HAZARDS IDENTIFICATION

Emergency Overview: Irritant.

Potential Health Effects:

Eye: May cause irritation.

Skin: May cause irritation.

Inhalation: Prolonged or excessive inhalation may cause respiratory tract irritation.

Ingestion: May be harmful if swallowed. May cause vomiting.

Chronic Health Effects: Prolonged or repeated contact may cause skin irritation.

Signs/Symptoms: Overexposure may cause headaches and dizziness.

Target Organs: Eyes. Skin. Respiratory system. Digestive system.

Aggravation of Pre-Existing

Conditions:

None generally recognized.

SECTION 4 - FIRST AID MEASURES

MSD

http://www.actiocms.com/VIEW_MSDS/AuthorDisplay_V402/msdsdispl...

1 of 4 11/30/2010 4:05 P

Summary of content (4 pages)

PAGE 1
MSDS http://www.actiocms.com/VIEW_MSDS/AuthorDisplay_V402/msdsdispl... View MSDS Section : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION NFPA Product Name: Premium Transparent Deck, Fence & Siding Weatherproofing Wood Finish No. 500 MSDS Manufacturer Number: 500 Manufacturer Name: BEHR Process Corporation Address: 3400 W.
PAGE 2
MSDS http://www.actiocms.com/VIEW_MSDS/AuthorDisplay_V402/msdsdispl... Eye Contact: Immediately flush eyes with plenty of water for 15 to 20 minutes. Get medical attention, if irritation or symptoms of overexposure persists. Skin Contact: Immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists. Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration or give oxygen by trained personnel.
PAGE 3
MSDS http://www.actiocms.com/VIEW_MSDS/AuthorDisplay_V402/msdsdispl... EXPOSURE GUIDELINES Silicon dioxide, chemically prepared : Guideline ACGIH: TLV-TWA: 10 mg/m3 Guideline OSHA: OSHA-TWA: 20 mg/m3 Ethylene glycol : Guideline ACGIH: TLV-STEL: C 100 mg/m3 (Aerosol only) SECTION 9 - PHYSICAL and CHEMICAL PROPERTIES Physical State Appearance: Liquid. Color: Clear Boiling Point: No Data Melting Point: No Data Density: 8 - 10 Lbs./gal. Vapor Density: Greater than 1 (Air = 1).
PAGE 4
MSDS http://www.actiocms.com/VIEW_MSDS/AuthorDisplay_V402/msdsdispl... SECTION 13 - DISPOSAL CONSIDERATIONS Waste Disposal: Consult with the US EPA Guidelines listed in 40 CFR Part 261.3 for the classifications of hazardous waste prior to disposal. Furthermore, consult with your state and local waste requirements or guidelines, if applicable, to ensure compliance. Arrange disposal in accordance to the EPA and/or state and local guidelines.