SDS

ManualsBrandsBEHR PREMIUM ManualsConcrete Coatings1 gal. Color Enhancing Penetrating Clear Sealer

SAFETY DATA SHEET

1. Identification

BEHR Premium Color Enhancing SealerProduct identifier

Other means of identification

982

Product code

Architectural Coating

Recommended use

None known.

Recommended restrictions

Manufacturer/Importer/Supplier/Distributor information

Behr Process Corp.

Supplier

1801 E. St. Andrew Place

Santa Ana, CA 92705

714-545-7101

Telephone

+1 760 476 3962

Emergency telephone

+1 866 519 4752

335213

Access code

2. Hazard(s) identification

Not classified.

Physical hazards

Category 1ASensitization, skin

Health hazards

Not classified.

OSHA defined hazards

Label elements

Signal word

Warning

Hazard statement

May cause an allergic skin reaction.

Precautionary statement

Prevention

Avoid breathing mist/vapors. Contaminated work clothing must not be allowed out of the

workplace. Wear protective gloves.

Response

If on skin: Wash with plenty of water. If skin irritation or rash occurs: Get medical advice/attention.

Wash contaminated clothing before reuse.

Storage

Store away from incompatible materials.

Disposal

Dispose of contents/container in accordance with local/regional/national/international regulations.

Hazard(s) not otherwise

classified (HNOC)

None known.

Supplemental information

None.

3. Composition/information on ingredients

Mixtures

CAS numbe

%Chemical name

2682-20-42-Methyl-2H-isothiazol-3-one 0 - 0.1

All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in

percent by volume.

The manufacturer has claimed the exact percentage as trade secret under the OSHA Hazard

Communication Standard.

Composition comments

BEHR Premium Color Enhancing Sealer SDS US

962300 Version #: 01 Revision date: - Issue date: 02-June-2022

1 / 6

Summary of content (6 pages)

PAGE 1
SAFETY DATA SHEET 1. Identification Product identifier BEHR Premium Color Enhancing Sealer Other means of identification Product code 982 Recommended use Architectural Coating Recommended restrictions None known. Manufacturer/Importer/Supplier/Distributor information Supplier Telephone Emergency telephone Access code Behr Process Corp. 1801 E. St. Andrew Place Santa Ana, CA 92705 714-545-7101 +1 760 476 3962 +1 866 519 4752 335213 2. Hazard(s) identification Physical hazards Not classified.
PAGE 2
4. First-aid measures Inhalation Move to fresh air. Call a physician if symptoms develop or persist. Skin contact Eye contact Remove contaminated clothing immediately and wash skin with soap and water. In case of eczema or other skin disorders: Seek medical attention and take along these instructions. Rinse with water. Get medical attention if irritation develops and persists. Ingestion Rinse mouth. Get medical attention if symptoms occur.
PAGE 3
Skin protection Hand protection Wear appropriate chemical resistant gloves. Skin protection Other Wear suitable protective clothing. Use of an impervious apron is recommended. Respiratory protection In case of insufficient ventilation, wear suitable respiratory equipment. If airborne concentrations are above the applicable exposure limits, use NIOSH approved respiratory protection.
PAGE 4
Conditions to avoid Contact with incompatible materials. Incompatible materials Strong oxidizing agents. Hazardous decomposition products No hazardous decomposition products are known. 11. Toxicological information Information on likely routes of exposure Prolonged inhalation may be harmful. Inhalation Skin contact May cause an allergic skin reaction. Eye contact Direct contact with eyes may cause temporary irritation. Ingestion May cause discomfort if swallowed.
PAGE 5
Waste from residues / unused products Dispose in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner. Contaminated packaging Since emptied containers may retain product residue, follow label warnings even after container is emptied. Empty containers should be taken to an approved waste handling site for recycling or disposal. 14. Transport information DOT Not regulated as dangerous goods.
PAGE 6
16. Other information, including date of preparation or last revision Issue date 02-June-2022 Revision date - Version # 01 HMIS® is a registered trade and service mark of the ACA. Further information HMIS® ratings Health: 2 Flammability: 0 Physical hazard: 0 Personal protection: D List of abbreviations DOT: Department of Transportation (49 CFR 172.101). IATA: International Air Transport Association.