TDS

TECHNICAL DATA SHEETTECHNICAL DATA SHEET
BEHR PREMIUM™ AEROSOL
METALLIC, HAMMERED, AND TEXTURED FINISHES
PRODUCT INFORMATION
BEHR PREMIUM™ Aerosol features an enhanced formulation that combines paint and primer
†
in a single can, delivering
a premium, durable nish. Designed for both indoor and outdoor use, BEHR PREMIUM™ Aerosol can be used on wood,
metal, plastic, cast stone and wicker. Weather and corrosion resistant, it delivers a reliable, long-lasting nish. The unique,
ergonomic shape of the BEHR PREMIUM™ Aerosol can and its comfort tip deliver a superior spray experience that ghts
fatigue so you can create a smooth nish every time.
†
A primer coat may be needed on some surfaces.
RECOMMENDED USES:
Use on properly prepared surfaces such as:
• Wood • Metal • Plastic • Cast Stone • Wicker
COLOR AND SHEEN ON THE CAP IS REPRESENTATIVE OF THE PRODUCT.
PRODUCT SPECIFICATIONS:
Colors:
B060144 Metallic Gold Gloss
B060244 Metallic Oil Rubbed Bronze Satin
B060544 Metallic Soft Iron Satin
B060644 Metallic Vintage Gold Gloss
B060744 Metallic Nickel Satin
B060844 Metallic Titanium Gloss
B062044 Metallic Antique Copper Gloss
B061844 Metallic Dark Steel Gloss
B061744 Metallic Champagne Gold Matte
B062244 Metallic Burnished Amber Matte
B060944 Hammered Black Gloss
B061044 Hammered Brown Gloss
B061244 Hammered Burnished Amber Gloss
B061344 Hammered Antique Pewter Gloss
B061444 Hammered Dark Bronze Gloss
B061644 Hammered White Gloss
B062344 Hammered Chestnut Gloss
B061544 Black Matte Textured
Sheen:
Flat/Matte: < 5 @ 60°
Satin: 20 – 30 @ 60°
Gloss: > 85 @ 60°
Sheen level depends on porosity of surface and various
surface irregularities.
Resin Type: Modied Alkyd
Net Weight: 12 oz / 340 g
*% Solids by Volume: 17% ± 2%
*% Solids by Weight: 21% ± 2%
Max Product Weighted MIR:
Metallic Gloss & Satin: 1.25
Metallic Matte & Textured Matte: 0.80
Hammered Gloss: 0.95
Coverage: 12 sq ft per can, depending on the surface
texture, porosity and application method. Does not include
the loss of material from spraying.
APPLICATION:
• Cover adjacent areas to avoid overspray.
• Shake can vigorously for one minute after mixing ball
begins to rattle and often during use.
• Hold can upright, moving from side-to-side while spraying
lightly and evenly about 12" from area being painted.
• Always start and nish spraying o the object. Each spray
pass should overlap the previous pass by half.
• Test your spray application technique on a scrap surface or
inconspicuous area before starting the project.
• Apply multiple thin coats to prevent dripping and sagging.
Two to three thin coats produce best results. Allow to dry
between each coat.
• Dries to Touch in 15–30 min. Cooler Temperatures or
higher humidity may prolong drying time.
• Use BEHR Primer for enhanced adhesion over bare wood
and metal.
†
NOTE: Use BEHR PREMIUM™ Chalk Decorative Aerosol
No. 714044 over glossy surfaces to create a matte nish.
Dry Time: @ 77°F (25° C) and 50% RH:
Allow to dry between each coat.
To Touch: 15 minutes
To Recoat: before 1 hour or after 24 hours
SURFACE PREPARATION:
• The surface must be clean, free of dust, grease, wax,
peeling paint, mold and mildew. If washing is necessary,
use a nonsoapy detergent or a TSP substitute. Rinse well
and allow to dry.
• Scrape o loose paint and sand to a smooth surface.
• For maximum adhesion, sand glossy surfaces thoroughly
before coating. For optimal adhesion to dicult surfaces
apply a coat of primer such as BEHR® Interior/Exterior
Bonding Primer, BEHR® Multi-Surface Interior/Exterior
Primer & Sealer No. 436 or KILZ® Original Aerosol (for
smaller areas).
WARNING! If you scrape, sand or remove old paint, you
may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD
DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE,
ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD
ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator
to control lead exposure. Clean up carefully with a HEPA
vacuum and a wet mop. Before you start, nd out how to
protect yourself and your family by contacting the National
Lead Information Center at 1-800-424-LEAD or log on to
www.epa.gov/lead.
CLEANUP/DISPOSAL:
• Clear spray valve immediately after use by turning can
upside down and spraying until only clear gas is released.
If spray nozzle becomes clogged, remove and clean with
VOC-compliant paint thinner or mineral spirits where
allowed. Otherwise use acetone.
• Clean fresh overspray with VOC-compliant paint thinner or
mineral spirits. Otherwise use acetone. Remove dried paint
with paint remover, but test small area rst to ensure paint
remover does not damage substrate.
• Please consider donating any unused product. For
recycling or disposal information contact your local
household refuse collection service.
CAUTIONS/LIMITATIONS:
• Do not stick pins or wire into can opening.
• Ensure adequate ventilation when spraying indoors.
• For best results, apply when air, material and surface
temperatures are between 50°F and 90°F. Avoid painting
in direct sunlight. Temperature and humidity extremes can
aect dry time and nal appearance.
• Shelf life under normal conditions is two years unopened.
This information is provided “as is” and no representations or warranties, either express or implied, of merchantability, tness for a particular purpose or of any other
nature are made with respect to this information or to any product referred to in this information. For SDS or to consult with a Behr Paint Company representative,
call 1-800-854-0133 Ext. 2 (U.S.A. only). ©2021 Behr Process Corporation, Santa Ana, CA 92705 U.S.A.
*Values given here are from BEHR PREMIUM™ Aerosol Gloss White.
Revised 12/2021
1 of 2