TDS

TECHNICAL DATA SHEETTECHNICAL DATA SHEET
GENERAL INFORMATION:
DANGER! EXTREMELY FLAMMABLE LIQUID AND VAPOR!
VAPORS MAY CAUSE FLASH FIRE. VAPOR HARMFUL.
CAUSES SERIOUS EYE DAMAGE. IRRITATES SKIN AND
RESPIRATORY TRACT. VENTILATION REQUIRED: To avoid
inhalation and combustion hazards (see below), DO NOT
use this product unless you can achieve cross ventilation by
opening windows and doors during application and drying.
MAY CONTAIN: ACETONE, BUTYL ACETATE, PROPANE,
ISOBUTANE, 1-METHOXY-2-PROPANOL ACETATE,
CALCIUM CARBONATE, METHYL ETHYL KETONE,
3-ETHOXYPROPIONIC ACID ETHYL ESTER, ALUMINUM,
SOLVENT NAPHTHA (PETROLEUM), STODDARD
SOLVENT, ALIPHATIC PETROLEUM DISTILLATES, LIGHT
AROM. SOLVENT NAPHTHA (PETROLEUM), HEAVY
HYDROTEATED NAPHTHA (PETROLEUM), CARBON
BLACK AND CRYSTALLINE SILICA. May aect the brain
or nervous system causing dizziness, headache or nausea.
CAUSES SERIOUS EYE DAMAGE. IRRITATES SKIN, NOSE
AND THROAT. Do not breathe vapors or spray mist. If
you experience eye watering, headaches or dizziness,
increase fresh air, wear respiratory protection (NIOSH/
MSHA TC 23C or equivalent) or leave the area. VAPORS
MAY IGNITE EXPLOSIVELY. Do not spray near sparks,
heat or open ame. Do not smoke. Vapors are heavier
than air and can travel at oor level to distant ignition
sources. Extinguish all ames and pilot lights and turn o
stoves, heaters, electric motors, high intensity lights and
other sources of ignition during use and until all vapors
are gone. WARNING-CONTENTS UNDER PRESSURE.
Do not puncture or incinerate container. Do not expose
to heat or store at elevated temperatures above 120°F.
Prolonged exposure to sun may cause bursting.
First Aid: If you experience diculty breathing, leave
the area to obtain fresh air. If diculty continues,get
medical attention immediately. If swallowed, call
physician immediately. In case of eye contact,
ush immediately with plenty of water for at least
15 minutes and get medical attention. For skin
contact, wash thoroughly with soap and water.
KEEP OUT OF REACH OF CHILDREN.
This information is provided “as is” and no representations or warranties, either express or implied, of merchantability, tness for a particular purpose or of any other
nature are made with respect to this information or to any product referred to in this information. For SDS or to consult with a Behr Paint Company representative,
call 1-800-854-0133 Ext. 2 (U.S.A. only) or visit behr.com. ©2021 Behr Process Corporation, Santa Ana, CA 92705 U.S.A.
Revised 12/2021
2 of 2
BEHR PREMIUM™ AEROSOL
METALLIC, HAMMERED, AND TEXTURED FINISHES