SDS

ventilation, or other engineering controls to control airborne levels below
recommended exposure limits. Good general ventilation should be sufficient to
control airborne levels. Where such systems are not effective wear suitable
personal protective equipment, which performs satisfactorily and meets OSHA
or other recognized standards. Consult with local procedures for selection,
training, inspection and maintenance of the personal protective equipment.
Eye/Face Protection: Wear appropriate protective glasses or splash goggles as described by 29 CFR
1910.133, OSHA eye and face protection regulation, or the European standard
EN 166.
Skin Protection Description: Chemical-resistant gloves and chemical goggles, face-shield and synthetic
apron or coveralls should be used to prevent contact with eyes, skin or
clothing.
Wear appropriate protective gloves. Consult glove manufacturer's data for
permeability data.
Respiratory Protection: A NIOSH approved air-purifying respirator with an organic vapor cartridge or
canister may be permissible under certain circumstances where airborne
concentrations are expected to exceed exposure limits. Protection provided by
air purifying respirators is limited. Use a positive pressure air supplied
respirator if there is any potential for an uncontrolled release, exposure levels
are not known, or any other circumstances where air purifying respirators may
not provide adequate protection.
Other Protective: Facilities storing or utilizing this material should be equipped with an eyewash
facility and a safety shower.
EXPOSURE GUIDELINES
SECTION 9 - PHYSICAL and CHEMICAL PROPERTIES
Physical State Appearance: Liquid.
Color: White
Boiling Point: No Data
Melting Point: No Data
Density: 8 - 10 Lbs./gal.
Vapor Density: Greater than 1 (Air = 1).
Vapor Pressure: Greater than 1 (Air = 1).
pH: 8.5 to 9.5
Molecular Formula: Mixture
Molecular Weight: Mixture
Flash Point: No Data
VOC Content: Material VOC: 18 gm/l (Includes Water)
Coating VOC.: 49 gm/l (Excludes Water)
SECTION 10 - STABILITY and REACTIVITY
Chemical Stability: Stable under normal temperatures and pressures.
Hazardous Polymerization: Not reported.
Conditions to Avoid: Heat, flames, incompatible materials, and freezing or temperatures below 32
deg. F.
Incompatible Materials: Oxidizing agents. Strong acids and alkalis.
Special Decomposition Products: Incomplete combustion may produce carbon monoxide and other toxic gases.
SECTION 11 - TOXICOLOGICAL INFORMATION
Pa
g
e 3 of 5MSDS
3/8/2012htt
p
://www.actiocms.com/VIEW
_
MSDS/AuthorDis
p
la
y_
V402/msdsdis
p
la
y
code
_
author
_
ne
...