SDS

Conditions:
SECTION 4 - FIRST AID MEASURES
Eye Contact: Immediately flush eyes with plenty of water for 15 to 20 minutes. Get medical
attention, if irritation or symptoms of overexposure persists.
Skin Contact: Immediately wash skin with soap and plenty of water.
Get medical attention if irritation develops or persists.
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration or
give oxygen by trained personnel. Seek immediate medical attention.
Ingestion: If swallowed, do NOT induce vomiting. Call a physician or poison control
center immediately. Never give anything by mouth to an unconscious person.
Other First Aid: Due to possible aspiration into the lungs, DO NOT induce vomiting if ingested.
Provide a glass of water to dilute the material in the stomach. If vomiting
occurs naturally, have the person lean forward to reduce the risk of aspiration.
SECTION 5 - FIRE FIGHTING MEASURES
Flash Point: No Data
Lower Flammable/Explosive Limit: Not applicable.
Upper Flammable/Explosive Limit: Not applicable.
Extinguishing Media: Use alcohol resistant foam, carbon dioxide, dry chemical, or water fog or
spray when fighting fires involving this material.
Protective Equipment: As in any fire, wear Self-Contained Breathing Apparatus (SCBA),
MSHA/NIOSH (approved or equivalent) and full protective gear.
NFPA Ratings:
NFPA Health: 1
NFPA Flammability: 1
NFPA Reactivity: 0
SECTION 6 - ACCIDENTAL RELEASE MEASURES
Personnel Precautions: Use proper personal protective equipment as listed in section 8.
Environmental Precautions: Avoid runoff into storm sewers, ditches, and waterways.
Spill Cleanup Measures: Absorb spill with inert material (e.g., dry sand or earth), then place in a
chemical waste container. Provide ventilation. Clean up spills immediately
observing precautions in the protective equipment section.
SECTION 7 - HANDLING and STORAGE
Handling: Use with adequate ventilation. Avoid breathing vapor and contact with eyes,
skin and clothing.
Storage: Store in a cool, dry, well ventilated area away from sources of heat,
combustible materials, and incompatible substances. Keep container tightly
closed when not in use.
Hygiene Practices: Wash thoroughly after handling. Avoid contact with eyes and skin. Avoid
inhaling vapor or mist.
SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION - EXPOSURE GUIDELINES
Engineering Controls: Use appropriate engineering control such as process enclosures, local exhaust
Pa
g
e 2 of 5MSDS
3/8/2012htt
p
://www.actiocms.com/VIEW
_
MSDS/AuthorDis
p
la
y_
V402/msdsdis
p
la
y
code
_
author
_
ne
...