SDS

ManualsBrandsBEHR ULTRA ManualsPaint1 gal. #PPU18-14 Cathedral Gray Satin Enamel Interior Paint and Primer in One

View (M)SDS
Section :   
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
SEC TION 1 - PRODUC T AND C OMPANY IDENTIFIC ATION
Product Name: BEHR® Premium Plus Int Ultra Satin Enamel Paint Medium No.
7754
Product Code: 7754
MSDS Manufacturer
Number:
7754
Manufacturer Name: BEHR Process  Corporation
A ddress: 3400 W. Segerstrom Avenue
Santa Ana, C A  92704
General Phone Number: (714) 545-7101
General Fax Number: (714) 241-1002
Customer Service Phone
Number:
(800) 854-0133 ext. 2
CHEMTREC : For emergencies in the US, call CHEMTREC: 800-424-9300
Canutec: In C anada, call CANUTEC: (613) 996-6666 (call collec t)
MSDS Creation Date: January 30, 2007
MSDS Revision Date: December 31, 2010
MSDS Format: A ccording to ANSI Z400.1-2004
NFPA
1 
1   0 
HMIS
Health Hazard  1
Fire Hazard  1
Reactivity  0
Personal
Protection
 
*  Chronic Health Effects
SEC TION 2 - C OMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name CAS# Ingredient Percent
Styrene/acrylic copolymer No data   1 - 5 by weight
Nepheline Syenite 37244-96-5   5 - 10 by weight
Non hazardous ingredient(s) Not applicable   60 - 100 by weight
Titanium dioxide 13463-67-7   10 - 30 by weight
SEC TION 3 - HAZARDS IDENTIFIC ATION
Emergency Overview: Irritant.
Potential Health Effects:
   Eye:             May cause irritation.
   Skin:             May cause irritation.
   Inhalation:              P rolonged or excessive inhalation may cause respiratory tract irritation.
   Ingestion:              May be harmful if swallowed. May cause vomiting.
Chronic Health Effects: Prolonged or repeated contact may cause skin irritation.
Signs/Symptoms: O verexposure may cause headaches and dizziness.
Target Organs: Eyes. Skin. Respiratory system. Digestive system.
A ggravation of Pre-Exis ting
Conditions:
None generally recognized.
SEC TION 4 - FIRST AID MEASURES
Eye Contact: Immediately flush eyes with plenty of water for 15 to 20 minutes. Get medical
attention, if irritation or symptoms of overexposure persists.
Skin Contact: Immediately wash skin with soap and plenty of water. 
Get medical attention if irritation develops or persists.
Inhalation: If inhaled, remove to fres h air. If not breathing, give artificial respiration or give
oxygen by trained personnel. Seek immediate medical attention.
Ingestion: If swallowed, do NO T  induce vomiting. Call a physician or pois on control center
immediately. Never give anything by mouth to an unconsc ious person.
O ther First A id: Due to possible aspiration into the lungs, DO  NO T induce vomiting if ingested.
Provide a glass  of water to dilute the material in the stomach. If vomiting occurs
naturally, have the person lean forward to reduce the risk of aspiration.
BEHR® Premium Plus Int Ultra Satin Enamel Paint Medium No. 7754 BEHR Process Corporation
Revison:12/31/2010, Version:0 Page:1 of  4

Summary of content (4 pages)

PAGE 1
View (M)SDS Section : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 SEC TION 1 - PRODUC T AND C OMPANY IDENTIFIC ATION NFPA Product Name: Product Code: MSDS Manufacturer Number: Manufacturer Name: A ddress: General Phone Number: General Fax Number: Customer Service Phone Number: CHEMTREC: Canutec: MSDS Creation Date: MSDS Revision Date: MSDS Format: BEHR® Premium Plus Int Ultra Satin Enamel Paint Medium No. 7754 7754 7754 BEHR Process Corporation 3400 W.
PAGE 2
naturally, have the person lean forward to reduce the risk of aspiration. SEC TION 5 - FIRE FIGHTING MEASURES Flash Point: No Data Lower Flammable/Explosive Limit: Not applicable. Upper Flammable/Explosive Limit: Not applicable. Extinguishing Media: Use alcohol resistant foam, carbon dioxide, dry chemical, or water fog or spray when fighting fires involving this material.
PAGE 3
Physical State A ppearance: Liquid. Color: White Boiling Point: No Data Melting Point: No Data Vapor Density: Greater than 1 (A ir = 1). Vapor Pressure: Greater than 1 (A ir = 1). pH: 8.5 to 9.5 Molecular Formula: Mixture Molecular Weight: Mixture Flash Point: No Data V O C Content: Material V O C: 14 gm/l (Includes Water) Coating V O C.: 37 gm/l (Excludes Water) Note - The addition of colorant may add V O Cs.
PAGE 4
TSCA Inventory Status: Listed State Regulations: Listed in the New Jersey State Right to Know List. Listed in the Pennsylvania State Hazardous Substances List.