TDS

TECHNICAL DATA SHEETTECHNICAL DATA SHEET
D
E
S
I
G
N
E
R
C
O
L
L
E
C
T
I
O
N
BEHR® CHALK SPRAY PAINT
PRODUCT INFORMATION
BEHR® Chalk Spray Paint is designed to deliver a smooth, matte nish that can be applied over most existing surfaces with
very little surface preparation. It has excellent adhesion and coverage. It is ideal for refreshing old and new wooden furniture,
cast stone, concrete, and even metal surfaces to create one-of-a-kind accent pieces. It also features an ergonomic can shape
that allows for more comfortable application.
RECOMMENDED USES:
Use on properly prepared surfaces such as:
• Wood • Metal • Plastic • Cast Stone • Wicker
COLOR AND SHEEN ON THE CAP IS REPRESENTATIVE OF THE PRODUCT. Not for touch-up on surfaces previously painted with
BEHR CHALK DECORATIVE PAINT.
PRODUCT SPECIFICATIONS:
Colors:
70244 BEHR Chalk Spray Paint Miniature Rose
70844 BEHR Chalk Spray Paint Tin White
71044 BEHR Chalk Spray Paint Pale Moon
72844 BEHR Chalk Spray Paint Surf
73544 BEHR Chalk Spray Paint Gingham
74544 BEHR Chalk Spray Paint Classic Noir
†
714044 BEHR Chalk Spray Paint Clear
Sheen: < 5 @ 85° F
Resin Type: Modied Alkyd
Net Weight: 12 oz / 340 g
*% Solids by Volume: 17% ± 2%
*% Solids by Weight: 21% ± 2%
Max VOC (by weight): 60%
Max Product Weighted MIR: 0.80
Coverage: 12 sq ft per can, depending on the surface
texture, porosity and application method. Does not include
the loss of material from spraying.
APPLICATION:
• Cover adjacent areas to avoid overspray.
• Shake can vigorously for one minute after mixing ball
begins to rattle and often during use.
• Hold can upright, moving from side-to-side while spraying
lightly and evenly about 12" from area being painted.
• Always start and nish spraying o the object. Each spray
pass should overlap the previous pass by half.
• Test your spray application technique on a scrap surface or
inconspicuous area before starting the project.
• Apply multiple thin coats to prevent dripping and sagging.
Two to three thin coats produce best results. Allow to dry
between each coat.
†
NOTE: Use BEHR Chalk Spray Paint Clear No. 714044
over glossy surfaces to create a matte nish. For high-use
surfaces, such as coee tables, dining tables or vanities,
spray over surfaces previously painted with BEHR Chalk Style
Paint for a permanent seal.
Dry Time: @ 77°F (25° C) and 50% RH:
Allow to dry between each coat.
To Touch: 15 minutes
To Recoat: before 1 hour or after 24 hours
SURFACE PREPARATION:
• The surface must be clean, free of dust, grease, wax,
peeling paint, mold and mildew. If washing is necessary,
use a nonsoapy detergent or a TSP substitute. Rinse well
and allow to dry.
• Scrape o loose paint and sand to a smooth surface.
• For maximum adhesion, sand glossy surfaces thoroughly
before coating. For optimal adhesion to dicult surfaces
apply a coat of primer such as BEHR® Interior/Exterior
Bonding Primer, BEHR® Multi-Surface Interior/Exterior
Primer & Sealer No. 436 or KILZ® Original Aerosol (for
smaller areas).
WARNING! If you scrape, sand or remove old paint, you
may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD
DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE,
ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD
ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator
to control lead exposure. Clean up carefully with a HEPA
vacuum and a wet mop. Before you start, nd out how to
protect yourself and your family by contacting the National
Lead Information Center at 1-800-424-LEAD or log on to
www.epa.gov/lead.
CLEANUP/DISPOSAL:
• Clear spray valve immediately after use by turning can
upside down and spraying until only clear gas is released.
If spray nozzle becomes clogged, remove and clean with
VOC-compliant paint thinner or mineral spirits where
allowed. Otherwise use acetone.
• Clean fresh overspray with VOC-compliant paint thinner or
mineral spirits. Otherwise use acetone. Remove dried paint
with paint remover, but test small area rst to ensure paint
remover does not damage substrate.
• Please consider donating any unused product. For
recycling or disposal information contact your local
household refuse collection service.
CAUTIONS/LIMITATIONS:
• Do not stick pins or wire into can opening.
• Ensure adequate ventilation when spraying indoors.
• For best results, apply when air, material and surface
temperatures are between 50°F and 90°F. Avoid painting
in direct sunlight. Temperature and humidity extremes can
aect dry time and nal appearance.
• Shelf life under normal conditions is two years unopened.
GENERAL INFORMATION:
VENTILATION REQUIRED: To avoid inhalation and
combustion hazards (see below), DO NOT use this product
unless you can achieve cross ventilation by opening
windows and doors during application and drying.
CONTAINS ACETONE, N-BUTYL ACETATE, PROPANE,
ISOBUTANE, ISOBUTYL ACETATE, PROPYLENE GLYCOL
MONOMETHYL ETHER ACETATE, TOLUENE AND XYLENE.
VAPOR HARMFUL. May aect the brain or nervous system
causing dizziness, headache or nausea. CAUSES SERIOUS
EYE DAMAGE. IRRITATES SKIN, NOSE AND THROAT. Do
not breathe vapors or spray mist. If you experience eye
watering, headaches or dizziness, increase fresh air, wear
respiratory protection (NIOSH/MSHA TC 23C or equivalent)
or leave the area. VAPORS MAY IGNITE EXPLOSIVELY. Do
not spray near sparks, heat or open ame. Do not smoke.
Vapors are heavier than air and can travel at oor level to
distant ignition sources. Extinguish all ames and pilot
lights and turn o stoves, heaters, electric motors, high
intensity lights and other sources of ignition during use and
until all vapors are gone. WARNING-CONTENTS UNDER
PRESSURE. Do not puncture or incinerate container. Do
not expose to heat or store at elevated temperatures above
120°F. Prolonged exposure to sun may cause bursting.
* Values given here are from BEHR® CHALK SPRAY PAINT White color.
This information is provided “as is” and no representations or warranties, either express or implied, of merchantability, tness for a particular purpose or of any other
nature are made with respect to this information or to any product referred to in this information. For SDS or to consult with a Behr Paint Company representative, call
1-800-854-0133 Ext. 2 (U.S.A. only). ©2020 Behr Process Corporation, Santa Ana, CA 92705 U.S.A.
Revised 6/2020
1 of 2