TDS

*
Values given here are from BEHR® Paint + Primer Aerosol Enamel White color.
This information is provided “as is” and no representations or warranties, either express or implied, of merchantability, tness for a particular purpose or of any
other nature are made with respect to this information or to any product referred to in this information. For SDS or to consult with a technical service representative,
call 1-800-854-0133, Ext.2 (U.S.) • www.behr.com ©2019 Behr Process Corporation, Santa Ana, CA 92705 U.S.A.
Revised 7/2019
PAINT + PRIMER AEROSOL ENAMEL
TECHNICAL DATA SHEET
PRODUCT INFORMATION
BEHR® Paint + Primer Aerosol Enamel delivers a premium nish with excellent adhesion to multiple surfaces. Ideal for small indoor
and outdoor projects and highly detailed surfaces. BEHR Paint + Primer Aerosol Enamel can be used on wood, metal, plastic,
cast stone and wicker. The comfort tip reduces nger fatigue and delivers a great application experience.
RECOMMENDED USES:
Use on properly prepared surfaces such as:
• Wood • Metal • Plastic • Cast Stone • Wicker
CONTAINER CAP PROVIDES CLOSE APPROXIMATION OF COLOR AND SHEEN OF THE PRODUCT. Not for touch-up on surfaces
previously painted with non-aerosol BEHR paint.
PRODUCT SPECIFICATIONS:
Colors:
B000144 Black Gloss
B000244 Orion Gray Gloss
B000344 Lunar Surface Gloss
B000444 Hidden Sea Glass Gloss
B000544 Inked Gloss
B000644 Blazing Bonre Gloss
B000744 Baronial Brown Gloss
B000844 No More Drama Gloss
B000944 Flirt Alert Gloss
B001044 Unmellow Yellow Gloss
B001144 Luck of the Irish Gloss
B001244 Congo Gloss
B001344 Venom Gloss
B001444 Tropics Gloss
B001544 Mayan Treasure Gloss
B001644 Sugar Beet Gloss
B001744 Outdoor Café
B001844 Khaki Shade Gloss
B001944 White Gloss
B002044 White Flat
B002144 Black Flat
B002244 Lunar Surface Flat
B002344 Clear Flat
B002444 Resort Sunrise Gloss
Finish:
Flat: <5 @ 60
Gloss: >80 @ 60
Sheen level depends on porosity of surface and various
surface irregularities.
Resin Type: Modied Alkyd
Net Weight: 12 oz / 340 g
*% Solids by Weight: 20% ± 2%
*% Solids by Volume: 16% ± 2%
Max VOC (by weight): 60%
Max Product-Weighted MIR:
Flat: 0.80
Non-Flat: 0.95
Coverage: 12 sq ft per can, depending on the surface texture,
porosity and application method. Does not include the loss of
material from spraying.
SURFACE PREPARATION:
• The surface must be clean, free of dust, grease, wax, peeling
paint, mold and mildew. If washing is necessary, use a non-
soapy detergent or a TSP substitute. Rinse well and allow to dry.
• Scrape o loose paint and sand to a smooth surface.
• For maximum adhesion, sand glossy surfaces thoroughly
before coating.
Stain-Blocking:
• If stain-blocking performance is required, apply a coat of primer such
as KILZ® ORIGINAL Interior/Exterior Oil-Based Aerosol Primer No. 1008.
WARNING! If you scrape, sand or remove old paint, you may release
lead dust. LEAD IS TOXIC. Contact the National Lead Information
Center at 1-800-424-LEAD or log on to www.epa.gov/lead.
APPLICATION:
• Shake can vigorously for 1 minute after mixing ball begins to
rattle and often during use.
• Test your spray application technique on a scrap surface or
inconspicuous area before starting the project.
• Hold can upright, moving from side-to-side while spraying
lightly and evenly about 12” from area being painted. Always
start and nish spraying o the object. Each spray pass should
overlap the previous pass by half.
• Apply multiple thin coats to prevent dripping and sagging.
Allow to dry between each coat.
Dry Time: @ 77°F (25° C), 50% RH:
Longer dry time required in cooler temperatures and in higher
humidity.
To Touch: 15 minutes
Re-coat: Before 1 hour or after 24 hours
CLEANUP/DISPOSAL:
• Clear spray valve immediately after use by turning can upside
down and spraying until only clear gas is released. If spray
nozzle becomes clogged, remove and clean with paint thinner
or mineral spirits where allowed.
• Do not stick pins or wire into spray nozzle opening.
• Clean fresh overspray with VOC-compliant paint thinner or
mineral spirits. Otherwise use acetone. Remove dried paint
with paint remover, but test small area rst to ensure paint
remover does not damage substrate.
• Wipe o tip before storing.
• Do not burn or place in home trash compactor.
• Do not stick pins or wire into spray nozzle opening.
• For recycling or disposal information, contact your household
refuse collection service.
CAUTIONS/LIMITATIONS:
• Temperature and humidity extremes can aect dry time
and nal appearance.
• Apply if surface, air and product temperatures are
between 50°-90°F.
• Avoid painting in direct sunlight.
• Avoid spraying in very windy and dusty conditions.
• Ensure adequate ventilation when spraying indoors.
• Cover adjacent areas to avoid overspray.
• Do not apply to galvanized steel.
GENERAL INFORMATION:
VENTILATION REQUIRED: To avoid inhalation and combustion
hazards (see below), DO NOT use this product unless you can
achieve cross ventilation by opening windows and doors during
application and drying. CONTAINS ACETONE, N-BUTYL ACETATE,
PROPANE, ISOBUTANE, ISOBUTYL ACETATE, PROPYLENE
GLYCOL MONOMETHYL ETHER ACETATE, TOLUENE AND
XYLENE. VAPOR HARMFUL. May aect the brain or nervous
system causing dizziness, headache or nausea. CAUSES
SERIOUS EYE DAMAGE. IRRITATES SKIN, NOSE AND THROAT.
Do not breathe vapors or spray mist. If you experience eye
watering, headaches or dizziness, increase fresh air, wear
respiratory protection (NIOSH/MSHA TC 23C or equivalent)
or leave the area. VAPORS MAY IGNITE EXPLOSIVELY. Do not
spray near sparks, heat or open ame. Do not smoke. Vapors
are heavier than air and can travel at oor level to distant
ignition sources. Extinguish all ames and pilot lights and
turn o stoves, heaters, electric motors, high intensity lights
and other sources of ignition during use and until all vapors
are gone. WARNING-CONTENTS UNDER PRESSURE. Do not
puncture or incinerate container. Do not expose to heat or
store at elevated temperatures above 120°F. Prolonged
exposure to sun may cause bursting. FIRST AID: If you have
diculty breathing, leave area to obtain fresh air. If diculty
continues, get medical attention immediately. If swallowed,
call physician immediately. In case of eye contact, flush
immediately with plenty of water for at least 15 minutes
and get medical attention. For skin contact, wash thoroughly
with soap and water. KEEP OUT OF REACH OF CHILDREN.