SDS

ManualsBrandsBEHR ManualsInterior Wood Stain1 qt. #TIS-356 Classic Oak Satin Semi-Transparent Water-Based Interior Stain and Poly in One

SAFETY DATA SHEET

1. Identification

BEHR® Water-Based Stain & Poly In One Satin Classic OakProduct identifier

Other means of identification

B6256

Product code

Architectural Coating

Recommended use

None known.

Recommended restrictions

Manufacturer/Importer/Supplier/Distributor information

Behr Process Corp.

Supplier

1801 E. St. Andrew Place

Santa Ana, CA 92705

714-545-7101

Telephone

+1 760 476 3962

Emergency telephone

+1 866 519 4752

335213

Access code

2. Hazard(s) identification

Not classified.

Physical hazards

Not classified.

Health hazards

Not classified.

OSHA defined hazards

Label elements

None.

Hazard symbol

Signal word

None.

Hazard statement

The mixture does not meet the criteria for classification.

Precautionary statement

Prevention

Observe good industrial hygiene practices.

Response

Wash hands after handling.

Storage

Store away from incompatible materials.

Disposal

Dispose of waste and residues in accordance with local authority requirements.

Hazard(s) not otherwise

classified (HNOC)

None known.

Supplemental information

None.

3. Composition/information on ingredients

Mixtures

8002-74-2 1 - 5Paraffin waxes and

Hydrocarbon waxes

CAS number %Chemical name

All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in

percent by volume.

The manufacturer has claimed the exact percentage as trade secret under the OSHA Hazard

Communication Standard.

Composition comments

4. First-aid measures

Move to fresh air. Call a physician if symptoms develop or persist.

Inhalation

Wash off with soap and water. Get medical attention if irritation develops and persists.

Skin contact

Rinse with water. Get medical attention if irritation develops and persists.

Eye contact

Rinse mouth. Get medical attention if symptoms occur.

Ingestion

SDS US

BEHR® Water-Based Stain & Poly In One Satin Classic Oak

950694 Version #: 00 Revision date: 10/28/19

Issue date: 10/28/19

1 / 6

Summary of content (6 pages)

PAGE 1
SAFETY DATA SHEET 1. Identification Product identifier BEHR® Water-Based Stain & Poly In One Satin Classic Oak Other means of identification Product code B6256 Recommended use Architectural Coating Recommended restrictions None known. Manufacturer/Importer/Supplier/Distributor information Supplier Telephone Emergency telephone Access code Behr Process Corp. 1801 E. St. Andrew Place Santa Ana, CA 92705 714-545-7101 +1 760 476 3962 +1 866 519 4752 335213 2.
PAGE 2
Most important symptoms/effects, acute and delayed Direct contact with eyes may cause temporary irritation. Indication of immediate medical attention and special treatment needed Treat symptomatically. General information Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. 5. Fire-fighting measures Suitable extinguishing media Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
PAGE 3
Skin protection Hand protection Wear appropriate chemical resistant gloves. Skin protection Other Wear suitable protective clothing. Respiratory protection If airborne concentrations are above the applicable exposure limits, use NIOSH approved respiratory protection. Use a positive-pressure air-supplied respirator if there is any potential for an uncontrolled release, exposure levels are not known, or any other circumstances where air-purifying respirators may not provide adequate protection.
PAGE 4
Possibility of hazardous reactions No dangerous reaction known under conditions of normal use. Conditions to avoid Contact with incompatible materials. Incompatible materials Strong oxidizing agents. Hazardous decomposition products No hazardous decomposition products are known. 11. Toxicological information Information on likely routes of exposure Prolonged inhalation may be harmful. Inhalation Skin contact Prolonged skin contact may cause temporary irritation.
PAGE 5
Waste from residues / unused products Contaminated packaging Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions). Since emptied containers may retain product residue, follow label warnings even after container is emptied. Empty containers should be taken to an approved waste handling site for recycling or disposal. 14.
PAGE 6
Revision date 10/28/19 Version # 00 Health: 0 Flammability: 0 Physical hazard: 0 HMIS® ratings List of abbreviations References Disclaimer DOT: Department of Transportation (49 CFR 172.101). IATA: International Air Transport Association. IBC Code: International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk. IMDG Code: International Maritime Dangerous Goods Code. MARPOL: International Convention for the Prevention of Pollution from Ships.