Quick Start Guide (Check out behringer.
DJ CONTROLLERS CMD LC-1/CMD MM-1/CMD PL-1/CMD DV-1/CMD DC-1 Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
4 DJ CONTROLLERS CMD LC-1/CMD MM-1/CMD PL-1/CMD DV-1/CMD DC-1 Consignes de sécurité Les points repérés par ce symbole portent une tension électrique suffisante pour constituer un risque d’électrocution. Utilisez uniquement des câbles d’enceintes professionnels de haute qualité avec fiches Jack mono 6,35 mm ou fiches à verrouillages déjà installées. Toute autre installation ou modification doit être effectuée uniquement par un personnel qualifié.
6 DJ CONTROLLERS CMD LC-1/CMD MM-1/CMD PL-1/CMD DV-1/CMD DC-1 Instruções de Segurança Importantes Aviso! Terminais marcados com o símbolo carregam corrente elétrica de magnitude suficiente para constituir um risco de choque elétrico. Use apenas cabos de alto-falantes de alta qualidade com plugues TS de ¼" ou plugues com trava de torção pré-instalados. Todas as outras instalações e modificações devem ser efetuadas por pessoas qualificadas.
8 9 DJ CONTROLLERS CMD LC-1/CMD MM-1/CMD PL-1/CMD DV-1/CMD DC-1 Quick Start Guide DJ CONTROLLERS CMD LC-1/CMD MM-1/CMD PL-1/CMD DV-1/CMD DC-1 Hook-up (EN) Step 1: Hook-Up (ES) Paso 1: Conexión (FR) Etape 1 : Connexions (DE) Schritt 1: Verkabelung One CMD Controller Two or more CMD controllers Un controlador CMD Dois ou mais controladores CMD Un seul contrôleur CMD Deux contrôleurs CMD ou plus Ein CMD Controller Zwei oder mehr CMD Controller Um Controlador CDM Dois ou mais controladores CMD
10 11 DJ CONTROLLERS CMD LC-1/CMD MM-1/CMD PL-1/CMD DV-1/CMD DC-1 Quick Start Guide DJ CONTROLLERS CMD LC-1/CMD MM-1/CMD PL-1/CMD DV-1/CMD DC-1 Controls (EN) Step 2: Controls (ES) Paso 2: Controles (FR) Etape 2 : Réglages (DE) Schritt 2: Regler DC-1 DV-1 (PT) Passo 2: Controles Navigation Control FX Control FX Control Deck Navigation Trigger Buttons Loop/Cue Control
12 13 DJ CONTROLLERS CMD LC-1/CMD MM-1/CMD PL-1/CMD DV-1/CMD DC-1 Quick Start Guide DJ CONTROLLERS CMD LC-1/CMD MM-1/CMD PL-1/CMD DV-1/CMD DC-1 Controls (EN) Step 2: Controls (ES) Paso 2: Controles (FR) Etape 2 : Réglages (DE) Schritt 2: Regler PL-1 LC-1 (PT) Passo 2: Controles FX Control FX Control Pitch Fader Deck Navigation Clip/Scene Buttons Touch Sensitive Platter Transport Control Channel Control
14 15 DJ CONTROLLERS CMD LC-1/CMD MM-1/CMD PL-1/CMD DV-1/CMD DC-1 Quick Start Guide DJ CONTROLLERS CMD LC-1/CMD MM-1/CMD PL-1/CMD DV-1/CMD DC-1 Controls (EN) Step 2: Controls (ES) Paso 2: Controles (FR) Etape 2 : Réglages (DE) Schritt 2: Regler MM-1 (PT) Passo 2: Controles Cue/Track Library Navigation EQ/FX Control Cue Navigation Volume Faders Cross Fader USB Hub
16 17 DJ CONTROLLERS CMD LC-1/CMD MM-1/CMD PL-1/CMD DV-1/CMD DC-1 Quick Start Guide DJ CONTROLLERS CMD LC-1/CMD MM-1/CMD PL-1/CMD DV-1/CMD DC-1 Getting started (EN) Step 3: Getting started Make the necessary power connections. • The CMD DC-1, DV-1, LC-1, & PL-1 are bus powered. These controllers will receive power when they are connected to a computer or a USB power hub. • Connect the CMD MM-1 to the mains via the provided power adapter.
18 19 DJ CONTROLLERS CMD LC-1/CMD MM-1/CMD PL-1/CMD DV-1/CMD DC-1 Quick Start Guide DJ CONTROLLERS CMD LC-1/CMD MM-1/CMD PL-1/CMD DV-1/CMD DC-1 Module Mounting Plates (EN) Step 4: Module Mounting Plates The CMD modules can be connected to one another via metal mounting plates located on the bottom of the units. Follow these steps to connect two or more CMD modules to create a customized control surface. Remove the screws on the bottom of the controller to access the metal mounting plate.
20 DJ CONTROLLERS CMD LC-1/CMD MM-1/CMD PL-1/CMD DV-1/CMD DC-1 Quick Start Guide Specifications Technische Daten DV-1, DC-1, LC-1 PL-1 MM-1 CMD Modules Computer Bus Connectivity USB USB Hub Power Supply Voltage Power consumption Mains connection Dimensions / Weight Dimensions (W x D x H) Weight n/a USB 2.0, type B n/a 4 x USB 2.0 type A n/a n/a n/a n/a n/a n/a 100 -240 V~50/60 Hz Max. 12 W External power adapter 12.0 x 6.0 x 2.2" / 305 x 152 x 57 mm 2.0 lbs / 0.9 kg 12.1 x 6.0 x 2.
22 DJ CONTROLLERS CMD LC-1/CMD MM-1/CMD PL-1/CMD DV-1/CMD DC-1 Quick Start Guide Other important information Important information 1. Register online. Please register your new MUSIC Group equipment right after you purchase it by visiting behringer. com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable. 2. Malfunction.
We Hear You