User Manual

(EN) Step 3: Getting started
STUDIO L & XL Getting started
(ES) Paso 3: Puesta en marcha
Pulse el botón POWER del panel trasero para hacer
que quede en la posición OFF (no pulsado).
Gire el control de volumen y todos los controles TRIM
a su tope izquierdo.
Pulse todos los interruptores de ruteo, SOURCE
SELECT y MONITOR SELECT para hacer que queden en
su posición de no pulsado.
Conecte el cable del adaptador de corriente incluido
a la toma del panel trasero.
Conecte la toma USB de su DAW (workstation audio
digital) en su ordenador.
Conecte unos monitores activos o unos monitores
pasivos a través de una etapa de potencia a las tomas
MONITOR OUT A, B y C (los C sólo en el STUDIO XL).
Conecte un amplicador distribuidor de auriculares
a las tomas de salida STUDIO/PHONES AMP del panel
trasero (sólo STUDIO XL).
Conecte las salidas 2-TRACK a un dispositivo de
grabación externo para grabar la señal emitida
desde sus entradas INPUTS.
Vaya a www.behringer.com para obtener el
controlador de Windows más reciente para la serie
STUDIO. Los usuarios de Mac no necesitan instalar
ningún controlador. Para grabar las entradas 1 y 2 en
un DAW a través de USB, presione el botón REC SRC SEL en la parte
posterior de la unidad. El USB se puede seguir utilizando como
fuente al mismo tiempo sin que se grabe. Para grabar la salida de
2 pistas, que es una combinación de todas las fuentes, ajuste el
botón REC SRC SEL en el modo 2-TR.
En el STUDIO XL, puede ajustar CUE SOURCE a AUX
MIX (CUE IN), la fuente 2-TR SOURCE elegida o las
salidas DAW OUTPUTS 3/4 vía USB.
Ajuste de los niveles:
Con todas las fuentes externas al mínimo o
apagadas, pulse el botón POWER para colocarlo en la
posición ON.
Encienda los altavoces autoamplicados externos,
amplicadores de altavoces pasivos y amplicadores
de auriculares.
Elija qué fuente de monitorización quiere escuchar
pulsando el botón A, B ó C (el C sólo en el STUDIO XL)
del panel superior.
Interprete una canción en su DAW para comprobar y
ajustar los niveles de monitorización. Ajuste si es
necesario los controles de nivel TRIM de salida
de monitorización.
Ajuste la ganancia del canal de entrada elegido
usando su control TRIM. Calcule la cantidad de
ganancia necesaria observando el medidor de nivel
del panel superior.
Suba lentamente el control VOLUME. Si es volumen
es inferior a lo que esperaba, ajuste el control TRIM
para la opción de monitorización que haya elegido
(A, B ó C).
Si tiene un amplicador de auriculares conectado a
las tomas de salida STUDIO/PHONES AMP del panel
trasero, ajuste el nivel de entrada de la forma
adecuada. Suba gradualmente el volumen de su
amplicador de auriculares hasta llegar a un nivel apropiado.
Cada una de las tomas PHONES del panel frontal de la
unidad tiene un control de volumen dedicado. Conecte
un par de auriculares a las tomas de auriculares que
desee y ajuste su volumen según su gusto.
Para ajustar el nivel de la grabación enviada a su
DAW o dispositivo de grabación externa, ajuste la
fuente de entrada que quiera enviar en el panel
superior (deseleccione cualquier otra fuente de
entrada para evitar posibles problemas por bucles de
realimentación). Conecte la salida 2-TRACK en el panel trasero a su
dispositivo de grabación externo y ajuste el nivel de salida con el
interruptor + 4 / -10.
Puede rutar la señal del micrófono TALKBACK
interno al bus CUE o a los auriculares STUDIO L y XL ½
o a las salidas 2-Track (sólo STUDIO XL). Pulse el
botón del destino al que quiera enviar la señal y
después hable o cante en este micro de línea interior. Realice los
ajustes necesarios sobre la señal ajustando el control TALKBACK.
Para ajustar el volumen de los altavoces conectados
a las tomas STUDIO OUT, pulse el botón de salida y
suba el control STUDIO OUT del panel superior (sólo
STUDIO XL).
Push the POWER button on the rear panel to the OFF
position (pushed out).
Turn the VOLUME and all TRIM controls to the
far-left position.
Push all SOURCE SELECT, MONITOR SELECT, and
routing switches to the out position.
Connect the included power cable to the input on
the back panel.
Connect the USB from your DAW (Digital Audio
Workstation) on your computer.
Connect active monitors or passive monitors via
powered amp to the MONITOR OUT jacks A, B, and C
(C STUDIO XL only).
Connect a headphone distribution amplier to the
rear STUDIO/PHONES AMP output jacks
(STUDIO XL only).
Connect the 2-TRACK outputs to external recording
devices to record the signal coming out of your
INPUTS.
Please go to www.behringer.com to get the latest
Windows driver for STUDIO series. Mac users don’t
need to install any driver. To record Input 1 and 2
into a DAW via USB, press the REC SRC SEL button on
the back of the unit. USB can still be used as a source at the same
time without being recorded. To record the 2-track output, which
is a combination of all sources, set the REC SRC SEL button out to
2-TR mode.
On the STUDIO XL, CUE SOURCE can be set to AUX MIX
(CUE IN), selected 2-TR SOURCE, or DAW OUTPUTS 3/4
via USB.
Setting the levels:
With all external sources turned down or o,
push the POWER button to the ON position.
Turn on external powered speakers, passive speaker
ampliers and headphone ampliers.
Select which monitor source you wish to hear by
pushing in the A, B or C (C STUDIO XL only) button on
the top panel.
Play a song from your DAW to test and adjust
monitor levels. Adjust the monitor out TRIM level
controls if necessary.
Adjust the gain on the selected input channel using
its TRIM control. Gauge the amount of gain
necessary by observing the level meter on the top
panel.
Turn the VOLUME control up slowly. If the volume is
lower than expected, adjust the TRIM control for the
monitor option you selected (A, B or C).
If you have a headphone amplier connected to the
rear STUDIO/PHONES AMP output jacks, set the
input level as required. Gradually turn up the
volume on your headphone amplier to an
appropriate level.
Each of the PHONES jacks on the front of the unit
have a dedicated volume control. Connect a pair of
headphones to either of the phones jacks and adjust
volume to preference.
To set the level for recording back to your DAW or
external recording device, select the input source
you wish to send on the top panel (deselect any
other input sources to avoid potential feedback
loop). Connect the 2-TRACK on the back panel to your external
recording device and set the output level with the +4/-10 switch.
The built-in TALKBACK microphone signal can be
routed to the CUE bus on both the STUDIO L and XL
headphones 1/2 or to the 2-Track outputs (STUDIO
XL only). Push the button of the destination you
wish to address, then speak into the MIC. Make any adjustments to
the signal by adjusting the TALKBACK control.
To adjust the volume of the speakers connected to
the STUDIO OUT jacks, press the output button ON
and turn the STUDIO OUT control on the top panel
(STUDIO XL only).
36 37Quick Start GuideSTUDIO L & XL