User Manual 1202 /1002 Premium 12/10-Input 2-Bus Mixers with XENYX Mic Preamps, British EQs and Multi-FX Processor
XENYX 1202FX/1002FX User Manual Table of Contents Thank you........................................................................ 2 Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited Warranty............................................................ 3 1. Introduction................................................................ 5 1.1 General mixing console functions ........................
XENYX 1202FX/1002FX User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
XENYX 1202FX/1002FX User Manual “Support” at behringer.com. If your country is not listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product. All inquiries must be accompanied by a description of the problem and the serial number of the product.
XENYX 1202FX/1002FX User Manual 1. Introduction as little noise to it as possible. The XENYX Mic Preamp performs this role beautifully, leaving no traces of noise or sound coloration. Interference that could take place at the preamplification level could affect signal quality and purity, and would then be passed on to all other devices, resulting in inaccurate sounding program during recording or playback. The XENYX Series represents a milestone in the development of mixing console technology.
XENYX 1202FX/1002FX User Manual 1.3 Before you get started 2. Control Elements and Connectors 1.3.1 Shipment This chapter describes the various control elements of your mixing console. All controls, switches and connectors will be discussed in detail. Your mixing console was carefully packed in the factory to guarantee safe transport. Nevertheless, we recommend that you carefully examine the packaging and its contents for any signs of physical damage that may have occurred during transit. 2.
XENYX 1202FX/1002FX User Manual The second value range (+10 to -40 dBu) refers to the line input and shows its sensitivity. The settings for equipment with standard line-level signals (-10 dBV or +4 dBu) look like this: While the GAIN control is turned all the way down, connect your equipment. Set the GAIN control to the external devices’ standard output level. If that unit has an output signal level display, it should show 0 dB during signal peaks.
XENYX 1202FX/1002FX User Manual 2.3 Connector array of the main section Recording: For mastering, using a stereo compressor such as the COMPOSER PRO-XL MDX2600 can be recommended. Use it to custom-tailor the dynamic characteristics of your signal to the dynamic range of the recording equipment you are using. The signal is in this case passed on from the compressor into the recorder. CD/TAPE INPUT Fig. 2.
XENYX 1202FX/1002FX User Manual POWER 2.5 Digital effects processor The blue POWER LED indicates that the console is powered on. LEVEL INDICATOR The 4-segment display accurately displays the relevant signal level. LEVEL SETTING: To correctly set the gains of the channels, first set the LEVEL controls of the input channels to their center positions. Then use the GAIN controls to increase the input amplification until signal peaks show 0 dB on the level meter.
XENYX 1202FX/1002FX User Manual 3. Applications 3.1 Recording studio UMX490 MIDI sound module CD Player MD Recorder TRUTH B2030A B-2 PRO HPS3000 V-AMP 3 GAIN GAIN Digital Audio Workstation Electric guitar XENYX 1002FX Fig. 3.
XENYX 1202FX/1002FX User Manual 3.2 Live sound REV2496 UMX490 B1520 PRO BX4500H HPS3000 EP2000 Drum Computer BB410 MDX2600 FBQ3102 Bass guitar XM1800S MD Recorder GMX212 Electric guitar XENYX 1202FX CD Player Fig. 3.2: Live application of the 1202FX This illustration shows a typical arrangement for a live setup. Two vocal microphones and the line outputs of a guitar and a bass amplifier are connected to the mono channels of the 1202FX.
XENYX 1202FX/1002FX User Manual 4. Installation Balanced ¼" TRS connector 4.1 Mains connection strain relief clamp sleeve ring tip AC POWER IN Connect the power supply to the 3-pin mains connector on the rear of the console. Use the AC adapter supplied to connect the console to the mains. The adapter complies with all applicable safety standards. sleeve ground/shield ◊ Please use only the power supply unit provided with the console.
XENYX 1202FX/1002FX User Manual 5. Specifications Mono Inputs Audio Outputs Microphone Inputs FX Send Type XLR, electronically balanced, discrete input circuit Mic E.I.N. (20 Hz - 20 kHz) @ 0 Ω source resistance -132.7 dB / 137 dB A-weighted @ 50 Ω source resistance -130 dB / 133.9 dB A-weighted @ 150 Ω source resistance -127.1 dB / 130.9 dB A-weighted Frequency response <10 Hz - 200 kHz (-1 dB) Gain range +10 to +60 dB Max. input level +12 dBu @ +10 dB gain Impedance approx. 2.
XENYX 1202FX/1002FX User Manual Dimensions 1202FX Dimensions (H x W x D) 1 5/6 x 9 1/2 x 8 2/3" 47 x 220 x 242 mm Weight (Net) approx. 4.6 lbs / 2.1 kg 1002FX Dimensions (H x W x D) 1 5/6 x 7 2/5 x 8 2/3" 47 x 189 x 220 mm Weight (Net) approx. 3.5 lbs / 1.6 kg Measuring conditions: 1: 1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output; unity gain. 2: 20 Hz - 20kHz; measured at main output.
XENYX 1202FX/1002FX User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION XENYX 1202FX/1002FX Responsible Party Name: MUSIC Group Services US Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.
We Hear You