UP1200 ULTRAPAR User Manual A50-83433-00001
ULTRAPAR UP1200 Safety instructions CAUTION To reduce the risk of electrical shock, disconnect the spotlight from the mains before cleaning or servicing the unit. No user serviceable parts inside; refer servicing to qualified personnel. WARNING To reduce the risk of fire or electrical shock, do not expose the spotlight to rain or moisture. Detailed safety instructions: 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) 20) 21) 2 Read these instructions. Keep these instructions.
ULTRAPAR ULTRAPAR UP1200 Professional Die-Cast PAR Spotlight UP1200 == Extremely high luminous efficiency with low power consumption == Ideally suited for BEHRINGER 575H lamp or compatible models with G9.
ULTRAPAR UP1200 1. Introduction Congratulations! With the BEHRINGER ULTRAPAR UP1200 you purchased a first-class PAR spotlight mounted in a compact, extremely robust and durable casing and featuring a comprehensive range of accessories. 1.1 Before you begin Your ULTRAPAR was carefully packed in the factory and the packaging is designed to protect the unit from rough handling.
ULTRAPAR UP1200 2.1 Disassembling the lamp casing / installing a lamp Lamps that have been damaged, must be replaced immediately! Please proceed as follows to replace the lamp: ++ The lamp gets very hot during operation of the spotlight, so let it cool down sufficiently before you attempt to dismount it! == Disconnect the spotlight from the mains power supply, and unscrew the thumb screw on the rear of the lamp casing {3} (G 9.5 socket).
ULTRAPAR UP1200 3.1 Dismounting the lens ++ The lens gets very hot during operation of the spotlight, so let it cool down sufficiently before you attempt to dismount it! == Disconnect the spotlight from the mains and wait until it has cooled down. == Place the spotlight on a flat and stable surface. Never mount or dismount the lens, while the spotlight is fixed to a truss or stand. == Remove the protective mesh {8}: press its two spring shackles, then pull out the mesh.
ULTRAPAR UP1200 5. Cleaning the reflector == Disconnect the spotlight from the mains and remove the lamp casing as described in chapter 2.1. == Remove the color frame [11] (chapter 4), the protective mesh and lens [10] (chapter 3.1), so that the reflector is easily accessible. == Cleaning the reflector: Use oil-free compressed air or a soft, lint-free cotton cloth.
ULTRAPAR UP1200 8. Warranty 2. If the product needs to be modified or adapted in order to comply with applicable technical or safety standards on a national or local level, in any country which is not the country for which the product was originally developed and manufactured, this modification/adaptation shall not be considered a defect in materials or workmanship. The warranty does not cover any such modification/adaptation, irrespective of whether it was carried out properly or not.