User Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Setup
- Chapter 3 The Basics
- Chapter 4 Multitrack Audio Recorder
- The setup
- Audio recording step by step
- Creating a Project
- Adding Audio Tracks
- Routing audio inputs and outputs
- Monitor settings
- Setting the input signal level
- Configuring the metronome
- Recording takes
- Exchanging a part of a recorded take with a new recording
- Working with patterns
- Creating dynamic volume changes (energyXT2.5 only)
- Embedding loop samples
- Editing audio
- Crossfade
- Beatslice
- Creating a mix
- Multiple track recording
- Chapter 5 MIDI Sequencer
- MIDI setup with a master keyboard and virtual tone generators
- MIDI recording step by step
- Creating a Project
- Adding Instrument Tracks
- Using virtual instruments
- Routing MIDI inputs and outputs
- MIDI thru settings (MIDI monitoring)
- Configuring the metronome
- Recording takes
- Quantizing MIDI events
- Overdub recording
- Punch recording
- Working with patterns
- Editing MIDI events
- Remote controlling Instrument Tracks
- Using the Drum Track
- Freezing tracks (energyXT2.5 only)
- Chapter 6 Virtual FX Rack
- Chapter 7 Appendix
33
MULTITRACK AUDIO RECORDER
Make sure to adjust the eect's wet / dry mix to output only the eect signal, in order to render œ
the FX level control of energyXT eectively.
Click on the power symbol to bypass the eect quickly for monitoring purposes.iii.
In our example we added energyXT's Multi Eect as an insert eect to the Guitar track.
To add a send eect to a channel:
In the Mixer view, select the name entry of an eect in the Browser window and, with the mouse button i.
depressed, drag it into the send eect's section.
The send eect is instantly active and will appear as an additional channel in the mixer. All audio channels now feature
a FX Send level control.
With the mouse button depressed, drag the FX Send level control up and down to adjust the signal ii.
portion that will be send to the send eect.
A setting of 100 (%) means the signal is fully conducted to the send eect. A setting of 0 (%) means the signal fully
bypasses the send eect. Other settings dene the mix between these two extremes.
Make sure to adjust the eect's wet / dry mix to output only the eect signal, so that the wet / œ
dry mix is the result of the FX Send level setting and the position of the level fader of the send
eect channel.