User Manual 1202/1002/802/502 Premium 12/10/8/5-Input 2-Bus Mixer with XENYX Mic Preamp and British EQ
XENYX 1202/1002/802/502 User Manual Table of Contents Thank you........................................................................ 2 Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited Warranty............................................................ 3 1. Introduction................................................................ 5 1.1 General mixing console functions.....................
XENYX 1202/1002/802/502 User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
XENYX 1202/1002/802/502 User Manual “Support” at behringer.com. If your country is not listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product. All inquiries must be accompanied by a description of the problem and the serial number of the product.
XENYX 1202/1002/802/502 User Manual 1.
XENYX 1202/1002/802/502 User Manual 1.3.3 Online Registration LINE IN Please register your new BEHRINGER equipment right after your purchase by visiting http://behringer.com and read the terms and conditions of our warranty carefully. Each mono input also features a balanced line input on a ¼" connector. Unbalanced devices (mono jacks) can also be connected to these inputs. Should your BEHRINGER product malfunction, it is our intention to have it repaired as quickly as possible.
XENYX 1202/1002/802/502 User Manual 2.1.3 FX sends, panorama and level adjustment LINE IN Each stereo channel has two balanced line level inputs on ¼" jacks for left and right channels. If only the jack marked “L” (left) is used, the channel operates in mono. The stereo channels are designed to handle typical line level signals. Both inputs will also accept unbalanced jacks. 2.2.2 Equalizer stereo channels (802) The XENYX 802 features a stereo 3-band EQ in each stereo channel.
XENYX 1202/1002/802/502 User Manual +4/-10 The stereo inputs of the XENYX 1202 and 1002 have an input sensitivity switch which selects between +4 dBu and -10 dBV. At -10 dBV (home-recording level), the input is more sensitive (requires less level to drive it) than at +4 dBu (studio level). 2.3 Connector panel and main section 2.3.1 Send/return effects path Fig. 2.9: Monitor/main mix connectors MAIN MIX Fig. 2.7: FX send/return connectors The MAIN OUT connectors are unbalanced mono jacks.
XENYX 1202/1002/802/502 User Manual 2-TRACK OUTPUT +48 V These connectors are wired in parallel with the MAIN OUT and carry the main mix signal (unbalanced). Connect the 2-TRACK OUTPUT to the inputs of your recording device. The output level is adjusted via the high-precision MAIN MIX fader or rotary control (802). The red +48 V LED lights up when phantom power is on. The PHANTOM switch activates the phantom power supply on the XLR connectors of all mono channels. 2.3.
XENYX 1202/1002/802/502 User Manual 3.2 Audio connections You will need a large number of cables for different applications. The illustrations below show how the connectors should be wired. Be sure to use only high-grade cables. Balanced ¼" TRS connector strain relief clamp sleeve ring tip Please use commercial RCA cables to connect the 2-track inputs and outputs. You can, of course, also connect unbalanced devices to the balanced inputs/ outputs.
XENYX 1202/1002/802/502 User Manual 4. Specifications Mono Inputs Equalizer Microphone Inputs (XENYX Mic preamp) EQ Mono Channels Type XLR connector, electronically balanced, discrete input circuit Mic E.I.N.1 (20 Hz - 20 kHz) @ 0 Ω source resistance -134 dB / 135.7 dB A-weighted @ 50 Ω source resistance -131 dB / 133.3 dB A-weighted @ 150 Ω source resistance -129 dB / 130.5 dB A-weighted Frequency Response LOW 80 Hz / ±15 dB MID 2.
XENYX 1202/1002/802/502 User Manual Power Supply Physical/Weight 1002/802/502 1202 Power consumption 13 W USA/Canada Adapter BEHRINGER PSU MX3UL Mains voltage 120 V~, 60 Hz Europe/U.K./Australia Adapter BEHRINGER PSU MX3EU Mains voltage 230 V~, 50 Hz China Adapter BEHRINGER PSU MX3CC Input 220 V~ 50 Hz; 80 mA Output 2 x 18.5 V~, 2 x 150 mA Dimensions (H x W x D) 1.9 x 9.5 x 8.7" 47 x 220 x 242 mm Weight (Net) 4.8 lbs / 2.2 kg 1002 Dimensions (H x W x D) 1.9 x 7.
XENYX 1202/1002/802/502 User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION XENYX 1202/1002/802/502 Responsible Party Name: MUSIC Group Services US Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.
We Hear You