Specification Sheet

Technical Specifications
The information contained in this sheet is subject to change without notice. No part of this sheet may be reproduced or transmitted in
any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the
express written permission of BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER is a registered trademark. ALL RIGHTS RESERVED.
© 2001 BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany
Tel. [phone] / 92 06-0, Fax [phone] / 92 06-30
Transducer type: condenser, dual-diaphragm
Operating principle: pressure gradient
Polar pattern: omnidirectional / cardioid (switchable)
Connection: gold-plated balanced XLR connector
Open circuit voltage (at 1 kHz): -38 +/-2 dBV (0 dBV = 1 V/Pa)
Frequency response: 20 Hz - 20 kHz
Level attenuation: -10 dB (switchable)
Low-Cut filter: 6 dB/Oct. at 150 Hz (switchable)
Open circuit characteristic: 16 mV/Pa
Max. SPL (1% THD @ 1 kHz): 135 dB (0 dB), 145 dB (-10 dB)
Equivalent SPL (IEC 268-4): 18 dB-A
Signal-to-noise ratio: 76 dB, A-weighted
Nominal impedance: < 200 Ω
Load impedance: > 1000 Ω
Supply voltage: +48 V
Supply current: approx. 3.5 mA
Dimensions: ∅ head: 56 mm, ∅ shaft: 50 mm, length: 210 mm
Weight: approx. 0.520 kg
Omnidirectional:
Polar pattern Frequency response
Cardioid:
Polar pattern Frequency response
STUDIO CONDENSER MICROPHONE B-2
www.behringer.com
ENGLISH
Version 1.1 April 2001
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made
from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.