User Manual SINGLE DIAPHRAGM CONDENSER MICROPHONE Gold-Sputtered Large-Diaphragm Studio Condenser Microphone
SINGLE DIAPHRAGM CONDENSER MICROPHONE B-1 User Manual Important Safety Instructions Take care not to drop your microphone as this can lead to severe damage. BEHRINGER assumes no liability for any damage caused by the user. When the microphone is not in use, please take it out from its elastic suspension, clean it with Terminals marked with this symbol carry electrical current of a soft cloth, and then place it in its case.
SINGLE DIAPHRAGM CONDENSER MICROPHONE B-1 User Manual 1. Power Supply Your condenser mic B-1 needs a +48-V phantom power supply. Behringer assumes no liability for any damage caused by a defective phantom power supply. Always mute the sound reinforcement system before you switch on the phantom power supply. After power-up, the B-1 needs about 6 seconds to stabilize. 2.
SINGLE DIAPHRAGM CONDENSER MICROPHONE B-1 User Manual 5. Specifications Transducer type condenser, 1" single diaphragm Operating principle pressure gradient Polar pattern cardioid Connection gold-plated balanced XLR connector Open circuit voltage at 1 kHz -34 +/-2 dBV (0 dBV = 1 V/Pa) Open circuit sensitivity 20 mV/Pa Frequency range 20 Hz - 20 kHz Level attenuation -10 dB (switchable) Low-Cut filter 6 dB/Octave at 75 Hz (switchable) Max.
We Hear You