User Manual

12 13EU R OL I VE B115W/ B112W Quick Start Guide
EUROLIVE B115W/B112W Controls
(5)
(6)
(10)
(8)
(7)
(11)
(13)
(2)
(4)
(3)
(1)
(12)
(14)
(15)
(9)
(EN) Step 2: Controls
(1) The POWER switch turns the speaker on.
(2) Plug the included IEC power cable into
thisjack.
(3) Replace a blown fuse here.
(4) STEP 1 / PAIR button and indicator connect
your Bluetooth device. Press and release
theSTEP 1 button.
(5) STEP 2 / STEREO LINK button and indicator
link the B115W/B112W to another similar
speaker. Press and release the STEP 2
button. The LED will ash while linking,
and then light solid when the other speaker
successfullylinks.
(6) BLUETOOTH VOLUME button controls the
relative volume of the Bluetooth sound in
the overall mix.
(7) MIX OUTPUT sends a copy of the source
signal to another speaker using an XLR cable.
(8) Connect a microphone, balanced mixer
output, or the MIX OUTPUT from another
speaker using a balanced cable with a male
XLR plug. Connect a ¼" mixer output or
other line level signal into the center of the
XLR/TRS combination jack.
(9) INPUT 1 and INPUT 2 knobs adjust the
input sensitivity (gain) for the XLR/TRS
combination jacks, as well as the wireless
microphone receiver.
(10) CLIP LED lights when the input signal
begins to overload.
(11) HIGH EQUALIZER cuts or boosts treble
frequencies by ±15 dB.
(12) CLIP LED lights when the main output
signal begins to overload.
(13) LOW EQUALIZER cuts or boosts bass
frequencies by ±15 dB.
(14) Connect optional Behringer wireless
microphone receiver here.
(15) LEDs indicate wireless microphone
signalinput.
NOTE: The connection range between speaker
and Bluetooth streaming device may decrease if
Bluetooth streaming and wireless microphones are
usedsimultaneously.
(ES) Paso 2: Controles
(1) El interruptor POWER enciende el altavoz.
(2) Conecte el cable IEC incluido en esta entrada.
(3) Acceda desde aquí al fusible en caso de que
tenga que sustituirlo.
(4) El botón e indicador STEP 1 / PAIR le
permite la conexión de su dispositivo.
Pulsemomentáneamente el botón STEP 1.
(5) El botón e indicador STEP 2 / STEREO LINK
le permite enlazar el B115W/B112W a otro
altavoz similar. Pulse momentáneamente el
botón STEP 2. El piloto parpadeará durante
el proceso de enlace y se quedará iluminado
jo cuano el otro altavoz se haya enlazado
correctamente.
(6) El mando BLUETOOTH VOLUME controla el
volumen relativo del sonido Bluetooth en la
mezcla global.
(7) La salida MIX OUTPUT envía una copia de
la señal fuente a otro altavoz usando un
cableXLR.
(8) Conecte un micrófono, salida balanceada de
mezclador o la salida MIX OUTPUT de otro
altavoz por medio de un cable balanceado que
disponga de un conector XLR macho. Conecte
la salida de 6,3 mm de una mesa de mezclas u
otra señal con nivel de línea en la parte central
de esta toma combo XLR/TRS.
(9) Los mandos INPUT 1 e INPUT 2 le permiten
ajustar la sensibilidad de entrada (ganancia)
para los conectores combo XLR/TRS, así como
para el receptor de micrófono inalámbrico.
(10) El piloto CLIP se ilumina cuando la señal de
entrada empieza a sobrecargarse (saturar).
(11) HIGH EQUALIZER corta o realza las
frecuencias agudas en ±15 dB.
(12) El piloto CLIP se ilumina cuando la señal
de salida principal comience a estar
sobrecargada(saturada).
(13) LOW EQUALIZER corta o realza las frecuencias
graves en ±15 dB.
(14) Conecte aquí un receptor de micrófono
inalámbrico opcional de BEHRINGER.
(15) Los pilotos LED indican la entrada de señal del
micrófono inalámbrico.
NOTA: El rango de conexión entre este altavoz y el
dispositivo que esté enviando datos Bluetooth puede
disminuir si utiliza a la vez dispositivos que envíen datos
Bluetooth y micros inalámbricos.