Getting Started

20 EUROLIVE B15X/B12X Quick Start Guide 21
5. The SLAVE speaker will display “Slave linking...”
6. Select “Link speaker” from the MASTER speaker’s Bluetooth menu.
7. The MASTER speaker will display “Master Linking...”
8. Wait for the speakers to link.
9. Once the linking process is complete, Bluetooth audio will stream to the two speakers. The MASTER speaker will receive the left channel, and the
SLAVE speaker will receive the right channel.
10. MASTER and SLAVE connection will be indicated on the main, top-level DSP screens.
Bluetooth Control
A dedicated iOS/Android Live Control app for BEHRINGER Bluetooth-enabled speakers can be downloaded from the Apple Store and Android market.
When connected with a B12X/B15X speaker, the Live Control allows full remote control over all DSP functions, including Bluetooth streaming. Bluetooth streaming can
be done in parallel with analogue audio and sent to both mono and stereo setups.
• In both mono and stereo mode,  rst pair the MASTER speaker, and then launch the control app.
• If the Live Control app is connected to the speaker, you will see the following DSP screens:
• The Live Control app will automatically detect and adapt for mono or stereo mode.
• To alter the speaker settings, swipe the screen or press the settings icon. All B12X/B15X speaker settings can be accessed from the control app.
Operation with Bluetooth Pairing and Audio Streaming
• In both mono and stereo mode,  rst pair the MASTER speaker, and then launch the Live Control app.
• The Live Control app will automatically detect and adapt for mono or stereo mode.
• To alter the speaker settings, swipe the screen or press the settings icon. All B12X/B15X speaker settings can be accessed from the Live Control app.
Setting Up the Live Control App Connection
• Power on the  rst (usually left-hand) speaker. This speaker will become the MASTER speaker.
• Start the Live Control app on the IOS/Android device.
• Check that the Live Control app is connected and functioning with the single MASTER speaker.
• Power up the second speaker. This speaker will become the SLAVE speaker.
• Check that the main app page shows both MASTER and SLAVE input and balance control.
Firmware Update via App
Where possible please update your B12X/B15X  rmware using the Live Control app.
To update, go to the Settings Page in the app and look for the “CURRENT FIRMWARE” section. The Live Control app will detect the current  rmware version. If a
 rmware and automatically check for updates provided that the remote device has access to the Internet. If a newer  rmware version is available the app will o er
to download. For example:
Main Page (Speakers Linked) Main Page (Speakers Not Linked) Settings Page