Quick start Guide

ManualsBrandsBehringer ManualsAudio MonitoringEUROLIVE 1000W 2-Way 12" Powered Speaker

18 EUROLIVE B15X/B12X Quick Start Guide 19

Bluetooth Connection

To play audio from a Bluetooth-enabled device, you will need at least one B12X/B15X speaker and an iPad*/iPhone/Android*/Windows* device with basic Bluetooth

connectivity. With a basic Bluetooth connection, all related B12X/B15X DSP functions must still be controlled directly

from the B12X/B15X main panel via the rotary

encoder.

For Apple* iOS devices, you can also download a dedicated BEHRINGER B12X/B15X Bluetooth app from the App Store. This B12X/B15X Bluetooth app allows you to

control a single or stereo pair of B12X/B15X speakers, including all DSP functions, remotely from your iOS device (see “Bluetooth Control” below for more information).

Bluetooth Streaming

To stream Bluetooth audio with any Bluetooth device (iPad/iPhone/Android/Windows, etc.):

Mono Operation

1. Enable Bluetooth on your remote device.

2. Switch on your B12X/B15X speaker and minimize the volume.

3. Select “Pair device” from the B12X/B15X speaker’s Bluetooth menu.

4. Check that your remote device is searching for a connection.

5. Once your device detects the B12X/B15X speaker, select the B12X/B15X speaker from your remote device’s menu (e.g., “BEHRINGER B12X/B15X”).

6. Wait until the remote device shows an active connection, and then check the speaker’s Bluetooth menu, which should display the name of the remote device

(e.g., “HUAWEI P7-L07”).

7. Bluetooth music can now be streamed to your B12X/B15X speaker. The stereo signal will automatically mix down to mono.

8. The B12X/B15X speaker will display the Bluetooth indicator on the main, top-level DSP screen.

Stereo Operation

1. Complete the steps above to connect the  rst speaker to Bluetooth audio.

2. The  rst connected speaker automatically becomes the MASTER speaker.

3. Switch on the second speaker, which becomes the SLAVE speaker.

4. Select “Link speaker” from the SLAVE speaker's Bluetooth menu.

5. The SLAVE speaker will display “Slave linking...”

6. Select “Link speaker” from the MASTER speaker’s Bluetooth menu.

7. The MASTER speaker will display “Master Linking...”

8. Wait for the speakers to link.

9. Once the linking process is complete, Bluetooth audio

will stream to the two speakers. The MASTER speaker will receive the left channel, and the

SLAVE speaker will receive the right channel.

10. MASTER and SLAVE connection will be indicated on the main, top-level DSP screens.

*iPad and Apple are trademarks of Apple Inc. Android is a trademark of Google Inc. Windows is either a registered trademark or trademark of

Microsoft Corporation in the United States and/or other countries.

Bluetooth Control

A dedicated iOS control app for BEHRINGER Bluetooth speakers can be downloaded from the App Store.

• In both mono and stereo mode,  rst pair the MASTER speaker, and then launch the iOS control app.

• The iOS control app will automatically detect and adapt for mono or stereo mode.

• To alter the speaker settings, swipe the screen or press the settings icon. All B12X/B15X speaker settings can be accessed from the iOS control app.

Main Page (1 Speaker) Main Page (2 Speakers linked) Settings Page