User Manual
(EN) Step 2: Controls
EUROLIVE B207MP3 Controls
(1) (2)
(4)
(9)
(6)
(7)
(3)
(8)
(10)(5)
(11)
(12)
(13)
(15) (16) (17) (18) (19)
(14)
(1) MP3 PLAYBACK input accepts USB
connections from memory devices
with MP3 les.
(2) LCD DISPLAY shows the status of
the MP3 le being played.
(3) MAIN LEVEL Adjusts the
overallvolume.
(4) MP3 LEVEL independently
controls the playback level of the
currently-playing MP3 le.
(5) PHANTOM Sends 48V of phantom
power to the MIC/LINE inputs to
power condenser microphones.
TheLED lights when the PHANTOM
button isengaged.
(6) MP3 PLAYBACK section manages
navigation and playback of les
from a USB ash drive.
(7) DISP(LAY)/MODE buttons control
the MP3 player’s play mode and
also serve as contrast controls for
the LCD display.
(8) MIC/LINE INPUTS Route line-
level input signals into these
combination jacks using XLR,
balanced ¼" TRS, orunbalanced
¼"TS connectors.
(9) LEVEL 1-3 Adjusts the input
sensitivity for the MIC/LINE
combinationjacks.
(10) INSTRUMENT Press this button
to optimize the MIC/LINE 2 input
for unbalanced signals from
instruments using ¼"TSplugs.
(11) CD INPUT Route signals from
CDplayers, MP3 players, DJmixers,
and other line-level sound sources
into these RCA jacks.
(12) LEVEL 4 Adjusts the input
sensitivity (gain) for the CDINPUT
RCAjacks.
(13) EQ Cut or boost treble, mid, and
bass frequencies by ±15 dB.
(14) HEAT SINK Make sure you allow
plenty of space behind the speaker
for heatdissipation.
(15) POWER SWITCH Turns the speaker
on and o .
(16) POWER SOURCE Plug the included
IEC power cable into this jack.
(17) THRU Route a signal to another
speaker or device by using a
balanced cable with a male XLR
plug. TheTHRU jack draws a signal
from just before the MAIN LEVEL
and EQ section, combined with the
MAININsignal.
(18) LEVEL Adjust the level of the
outgoing THRUsignal.
(19) MAIN IN Connect the THRU signal
from another speaker using a
balanced cable with either a female
XLR plug or a balanced ¼” TRS plug.
10 EUROLIVE B207MP3 11 Quick Start Guide