Bedienungsanleitung B-CONTROL BCF2000/ BCR2000 FADER BCF2000 Total-Recall USB/MIDI Controller with 8 Motorized Faders ROTARY BCR2000 Total-Recall USB/MIDI Controller with 32 Illuminated Rotary Encoders
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung Inhaltsverzeichnis Danke............................................................................... 2 Wichtige Sicherhteitshinweise...................................... 3 Haftungsausschluss........................................................ 3 Beschränkte Garantie..................................................... 3 1. Einführung.................................................................. 4 1.1 Bevor Sie beginnen................
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung Wichtige Sicherhteitshinweise Vorsicht Die mit dem Symbol markierten Anschlüsse führen so viel Spannung, dass die Gefahr eines Stromschlags besteht. Verwenden Sie nur hochwertige, professionelle Lautsprecherkabel mit vorinstallierten 6,35 mm MONO-Klinkensteckern oder Lautsprecherstecker mit Drehverriegelung. Alle anderen Installationen oder Modifikationen sollten nur von qualifiziertem Fachpersonal ausgeführt werden.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung 1. Einführung ◊ Die BCF2000 / BCR2000 kann im Stand Alone-Betrieb auch ohne PC Die B-CONTROL ist eine überaus flexible Controller-Einheit für die verschiedensten Anwendungsgebiete.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung Hier gibt es 2 prinzipielle Möglichkeiten: • Fernsteuerung der Laufwerksfunktionen (Wiedergabe, schneller Vorlauf, Stop etc.) von Sequenzern, Harddisk-Recordern, Drum Computern etc.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung Note-Messages: After Touch Note On- und Note Off-Messages zählen für Tastenvirtuosen zu den essentiellen MIDI-Messages. Erst durch sie wird das Spielen von MIDI-Instrumenten von einem Masterkeyboard oder Computer aus möglich. Auch die B-CONTROL ist in der Lage, Note-Messages zu senden, jedoch nicht notwendigerweise, um Musik zu spielen. So werden Noten-Events auch zum Triggern von Drumloops oder einzelner Klänge aus dem Sampler verwendet.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung (1) (3) (4) (2) (5) (6) (10) (8) (9) (7) BCR2000 BCF2000 Abb. 3.1: Die Bedienoberfläche der B-CONTROLs CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE: REFER SERVICING TO QUALIFIED PERSONNEL. B – CONTROL BCF2000 CAUTION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung (3) Das vierstellige LED-Display zeigt beim Einschalten kurz die aktuelle Betriebssoftware-Version an. Danach springt es auf die gewählte Preset-Nummer um. Im Play-Betrieb zeigt es bei Betätigen der Bedienelemente die Werteänderungen in Echtzeit an. Im ProgrammierModus werden MIDI-Befehlsarten, Programm- / Kanalnummern und Parameterwerte angezeigt. 型 号:BCR2000 MIDI控制器 (4) Mit den ENCODER GROUP-Tastern lassen sich vier sog.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung 4.1.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung USB-Mode „U-3“: Software Sequencer push Software Mixer MIDI Keyboard turn move/ fade push Software Synthesizer MIDI OUT turn MIDI-Expander A move/ fade VOLUME MUTE DEMO FILTER LEVEL PHONES PROG TYPE COMBI PLAY push POWER MIDI IN MIDI-Expander B VOLUME MUTE DEMO FILTER LEVEL PHONES PROG TYPE COMBI PLAY POWER MIDI IN MIDI IN OUT A OUT B/THRU USB MIDI IN BCF/BCR2000 B-CONTROL MIDI Data Send Parameter Feedback
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung USB-Mode „U-4“ (Expanded): Software Mixer Software Synthesizer Software Sequencer turn push turn move/fade push move/fade push MIDI-Expander VOLUME MUTE DEMO FILTER LEVEL PHONES PROG TYPE COMBI PLAY POWER MIDI IN USB MIDI IN OUT A OUT B/THRU MIDI IN Unit 1 OUT B/THRU Unit 2 Abb. 4.4: Anwendung im USB-Mode 4 (Expanded) 4.1.2 Die Stand Alone-Modes BCF/BCR2000 UNIT 2 MIDI Data Send Param. Feedb.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung Stand Alone-Mode „S-1“: Stand Alone-Mode „S-2“: MIDI Keyboard MIDI Keyboard MIDI OUT MIDI OUT MIDI-Expander A Sampler VOLUME MUTE DEMO FILTER LEVEL PHONES PROG TYPE COMBI PLAY POWER MIDI IN MIDI-Expander B MIDI IN VOLUME MUTE DEMO FILTER LEVEL PHONES PROG TYPE COMBI PLAY MIDI-Expander POWER MIDI IN MIDI IN OUT A BCF/BCR2000 Merge MUTE DEMO FILTER LEVEL PHONES PROG TYPE COMBI PLAY POWER MIDI IN O
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung Stand Alone-Mode „S-3“: Für zusätzliche MIDI-Ausgänge werden externe Thru-Boxen benötigt. Bei aufwändigen MIDI-Setups ist die Verwendung von Thru-Boxen ohnehin langen Thru-Verkettungen vorzuziehen, da es ansonsten zu Verzögerungen in der Datenübertragung kommen kann. MIDI Keyboard Wenn Sie auf ein Response bei der Software-Steuerung verzichten, lassen sich beliebig viele BCF2000 / BCR2000 per MIDI verketten.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung Verbinden Sie den MIDI-Ausgang der MIDI-Schnittstelle am Computer mit dem MIDI IN der B-CONTROL. Schließen Sie OUT A an den MIDI-Eingang der Schnittstelle. Am OUT B kann ein weiterer MIDI-Empfänger angeschlossen werden. Denkbar ist auch eine Erweiterung mit einer zweiten B-CONTROL. Verbinden Sie hierzu den Ausgang B mit dem MIDI IN des nächsten MIDIEmpfängers.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung Mit LEARN können nicht nur CC-, NRPN- und Noten-Befehle empfangen werden, sondern nahezu alle Arten von MIDI-Daten, einschließlich kurzer SysEx-Strings. • Halten Sie den LEARN-Taster gedrückt und betätigen Sie das gewünschte Bedienelement. Dies kann ein Fader (nur BCF2000), Encoder (nur BCR2000), Push Encoder, Taster, Fußschalter oder Fußschweller (nur BCF2000) sein. Das Bedienelement wird im Display angezeigt (z. B.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung CONTINUOUS TYPE CONTROLLERS (encoders, turn function of Push Encoders, faders, foot controller) PUSH ENCODER 1 2 3 4 5 6 7 MIDI Data Type MIDI Send Channel Parameter Value 1 Value 2 Controller MODE Controller Option PROGRAM CHANGE 1-16 Off, Bank Select MSB Off, Bank Select LSB — — Absolute Absolute (14-Bit) Relative 1 Relative 2 Relative 3 Relative 1 (14-Bit) Relative 2 (14-Bit) Relative 3 (14-Bit) Absolute Absolute (14-Bit)
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung SWITCH TYPE CONTROLLERS (buttons, foot switches, push function of Push Encoders) PUSH ENCODER 1 2 3 4 MIDI Data Type MIDI Send Channel Parameter Value 1 5 6 7 8 Value 2 Controller MODE Controller Option Display Value PROGRAM CHANGE 1-16 Off, Bank Select MSB Off, Bank Select LSB Fixed Program Change-value: Off, 0 - 127 CC (Control Change) 1-16 CC-0-127 On-value: 0-127 Off-Value: Off, 0-127 Toggle On Toggle Off Increment
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung Sprd Spread: Bei einem Wert von 0 leuchtet die obere mittlere LED, bei Werteerhöhung fächert sich der Kranz von der Mitte aus gleichzeitig nach links und rechts auf. Pan In Mittelstellung (Wert 64) ist nur die obere mittlere LED an; bei kleineren Werten geht der Kranz nach links, bei größeren nach rechts (Panorama-Regelung). Qual (Quality Q) verhält sich entgegengesetzt zu Spread: der Kranz geht beim Erniedrigen des Wertes auseinander.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung Note: Mit Encoder 4 und 5 lassen sich die Wertebereiche einschränken bzw. invertieren. Die Notennummer kann sinnvollerweise nur einem Switch-Element zugeordnet werden. Die Notennummer wird mit Encoder 3 eingegeben. Die Note C3 (C-Schlüssel) entspricht dabei der Notennummer 60. Mit Encoder 4 kann die Lautstärke der Note (Velocity) eingestellt werden. 4.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung Um einen SysEx Dump zu empfangen, sind keinerlei Einstellungen am Gerät nötig. Sendet man ein Single-Preset zur B-CONTROL, werden die Daten in einen temporären Speicher geschrieben und müssen zur endgültigen Sicherung auf dem gewünschten Speicherplatz abgelegt werden (Preset Store-Funktion).
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung 5.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung GS / XG-Parameter Filter Cutoff Filter Resonance Vibrato Rate Vibrato Depth Vibrato Delay EG Attack EG Decay EG Release Modulation Portamento Time Volume Pan Reverb Send Chorus Send Delay/Variation Send Type NRPN NRPN NRPN NRPN NRPN NRPN NRPN NRPN CC 1 CC 5 CC 7 CC 10 CC 91 CC 93 CC 94 Display CUTF RESO RATE DEPT DELY ATTA DECY RELS MODU PORT VOL PAN REVB CHOR VARI Tab. 5.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Bedienungsanleitung 6. Technische Daten USB Interface Typ Stromversorgung Full Speed 12 MBit/s USB MIDI Class Compliant MIDI-Interface Typ 5-Pol DIN-Buchsen IN, OUT A, OUT B / THRU Bedienungselemente 85 - 250 V~, 50 - 60 Hz Leistungsaufnahme max.
We Hear You