Istruzioni per l’uso B-CONTROL BCF2000/ BCR2000 FADER BCF2000 Total-Recall USB/MIDI Controller with 8 Motorized Faders ROTARY BCR2000 Total-Recall USB/MIDI Controller with 32 Illuminated Rotary Encoders
B-CONTROL FADER BCF2000/ROTARY BCR2000 Istruzioni per l’uso Indice Grazie............................................................................... 2 Istruzioni di sicurezza importanti................................. 3 Diniego Legale................................................................. 3 1. Introduzione............................................................... 4 1.1 Prima di cominciare............................................................. 4 1.2 Requisiti di sistema.........
B-CONTROL FADER BCF2000/ROTARY BCR2000 Istruzioni per l’uso Istruzioni di sicurezza importanti Attenzione I terminali contrassegnati con il simbolo conducono una corrente elettrica sufficiente a costituire un rischio di scossa elettrica. Usare unicamente cavi per altoparlanti (Speaker) d’elevata qualità con connettori jack TS da ¼" pre-installati. Ogni altra installazione o modifica deve essere effettuata esclusivamente da personale tecnico qualificato.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Istruzioni per l’uso 1. Introduzione Il B-CONTROL è un’unità di controllo estremamente flessibile per i più svariati campi di impiego.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Istruzioni per l’uso Sono possibili due tipi di impostazioni Una possibilità consiste nell’impostare i numeri di controllo desiderati sul B-CONTROL e nel trasmetterli al software da controllare. Un’altra possibilità consiste nell’impostare i dati di controllo nell’apparecchio da controllare e di farne imparare l’assegnazione al B-CONTROL nel procedimento LEARN.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Istruzioni per l’uso (1) (3) (4) (2) (5) (6) (10) (8) (9) (7) BCR2000 BCF2000 Fig. 3.1. L’interfaccia dei B-CONTROL ON / CAUTION OFF TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE: REFER SERVICING TO QUALIFIED PERSONNEL. B – CONTROL BCF2000 CAUTION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Istruzioni per l’uso i LED FOOT SW si accendono quando vengono azionati i pedali, FOOT CTRL (solo BCF2000) si accende quando viene mosso il controllore a pedale e vengono trasmessi in tal modo dati MIDI. (6) Questa sezione di tasti ha delle funzioni assegnate non modificabili. STORE serve per la memorizzazione dei preset. Con LEARN passate nel modo LEARN. (14) Il collegamento in rete avviene tramite una presa di connessione a due poli.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Istruzioni per l’uso 4.1.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Istruzioni per l’uso Program Changes.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Istruzioni per l’uso Modo USB “U-4” (Expanded): Software Mixer Software Synthesizer Software Sequencer turn push turn move/fade push move/fade push MIDI-Expander VOLUME MUTE DEMO FILTER LEVEL PHONES PROG TYPE COMBI PLAY POWER MIDI IN USB MIDI IN OUT A OUT B/THRU MIDI IN Unit 1 OUT B/THRU Unit 2 Fig. 4.4: Applicazione nel modo USB 4 (Expanded) 4.1.2 I modi stand alone BCF/BCR2000 UNIT 2 MIDI Data Send Param. Feedb.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Istruzioni per l’uso Modo Stand Alone “S-1”: Modo Stand Alone “S-2”: MIDI Keyboard MIDI Keyboard MIDI OUT MIDI OUT Sampler MIDI-Expander A VOLUME MUTE DEMO FILTER LEVEL PHONES PROG TYPE COMBI PLAY POWER MIDI IN MIDI IN MIDI-Expander B VOLUME MUTE DEMO FILTER LEVEL PHONES PROG TYPE COMBI PLAY MIDI-Expander MIDI IN OUT A OUT B/THRU BCF/BCR2000 MIDI MIDI IN MIDI OUT A Merge MUTE DEMO FILTER LEVEL PHONES PROG TYPE COMBI PLA
B-CONTROL FADER BCF2000/ROTARY BCR2000 Istruzioni per l’uso Modo Stand Alone “S-3”: Per uscite MIDI addizionali sono necessarie delle thru box esterne. In caso di setup MIDI complicati è sicuramente preferibile l’impiego di thru box senza lunghe successioni a catena di thru, dal momento che altrimenti si possono verificare dei problemi per la trasmissione dei dati.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Istruzioni per l’uso Collegare l’uscita MIDI dell’interfaccia MIDI sul computer con l’ingresso MIDI IN del B-CONTROL Collegare l’uscita OUT A all’ingresso MIDI dell’interfaccia. Sull’ uscita OUT B è possibile collegare un altro ricevitore MIDI. E’ ipotizzabile anche un ampliamento con un secondo B-CONTROL. In tal caso collegare l’uscita B con l’ingresso MIDI IN del successivo ricevitore MIDI.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Istruzioni per l’uso 4.3 Programmazione 4.3.2 Programmazione nel modo EDIT 4.3.1 La funzione LEARN L’assegnazione di tutti i tipi di comando MIDI (Pitchbend, After Touch, MMC etc.) rispetto ai singoli elementi di controllo viene eseguita in modalità EDIT. Il modo più semplice di assegnare funzioni MIDI a singoli elementi di controllo è la funzione LEARN. In questo modo l’assegnazione avviene per così dire “da fuori”. I dati MIDI che trasmettete per es.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Istruzioni per l’uso CONTINUOUS TYPE CONTROLLERS (encoders, turn function of Push Encoders, faders, foot controller) PUSH ENCODER 1 2 3 4 5 6 7 8 MIDI Data Type MIDI Send Channel Parameter Value 1 Value 2 Controller MODE Controller Option Display Value PROGRAM CHANGE 1-16 Off, Bank Select MSB Off, Bank Select LSB — — Absolute Absolute (14-Bit) Relative 1 Relative 2 Relative 3 Relative 1 (14-Bit) Relative 2 (14-Bit) Relative 3 (14-Bit) Absolute
B-CONTROL FADER BCF2000/ROTARY BCR2000 Istruzioni per l’uso SWITCH TYPE CONTROLLERS (buttons, foot switches, push function of Push Encoders) PUSH ENCODER 1 2 3 4 5 6 7 8 MIDI Data Type MIDI Send Channel Parameter Value 1 Value 2 Controller MODE Controller Option Display Value PROGRAM CHANGE 1-16 Off, Bank Select MSB Off, Bank Select LSB Fixed Program Change-value: Off, 0 - 127 — — Value indication: On/Off CC (Control Change) 1-16 CC-0-127 On-value: 0-127 Off-Value: Off, 0-12
B-CONTROL FADER BCF2000/ROTARY BCR2000 Istruzioni per l’uso Qual (Quality Q) si comporta in modo contrario allo Spread: In caso di abbassamento del valore l’anello si dissolve. Questa impostazione è stata concepita per la visualizzazione della qualità del filtro in presenza di equalizzatori parametrici. Cut Cutoff è ottimale per il controllo della frequenza di cutoff di un filtro passa-basso, ad esempio su un Synthesizer In caso di valore zero tutti i LED sono accesi.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Istruzioni per l’uso Pitch Bend Encoder 1 2 3 4 5 6 7 8 Pitch Bend si può solo assegnare ad un elemento Continuous. Dal momento che si tratta di un tipo di comando con un proprio byte di stato, è sufficiente la selezione del canale MIDI (encoder 2) e “range” (encoder 4). After Touch Qui normalmente si seleziona “ALL”. Ciò significa che l’After Touch ha un effetto omogeneo su tutte le note (“Channel Pressure”).
B-CONTROL FADER BCF2000/ROTARY BCR2000 Istruzioni per l’uso 4.6 Ulteriori funzioni Snapshot-Send Local Off breve: Con uno Snapshot Send vengono trasmessi tutti i valori Controller momentanei, per trasmettere le impostazioni del B-CONTROL all’apparecchio MIDI collegato. Local Off significa che muovendo un elemento di comando del B-CONTROL non vengono trasmessi dati MIDI.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Istruzioni per l’uso 5.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Istruzioni per l’uso GS / XG-Parameter Type Display Filter Cutoff Filter Resonance Vibrato Rate Vibrato Depth Vibrato Delay EG Attack EG Decay EG Release Modulation Portamento Time Volume Pan Reverb Send Chorus Send Delay/Variation Send NRPN NRPN NRPN NRPN NRPN NRPN NRPN NRPN CC 1 CC 5 CC 7 CC 10 CC 91 CC 93 CC 94 CUTF RESO RATE DEPT DELY ATTA DECY RELS MODU PORT VOL PAN REVB CHOR VARI Tab. 5.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Istruzioni per l’uso 6.
We Hear You