Instrukcja obsługi B-CONTROL BCF2000/ BCR2000 FADER BCF2000 Total-Recall USB/MIDI Controller with 8 Motorized Faders ROTARY BCR2000 Total-Recall USB/MIDI Controller with 32 Illuminated Rotary Encoders
B-CONTROL FADER BCF2000/ROTARY BCR2000 Instrukcja obsługi Spis treści Dziękuję........................................................................... 2 Ważne informacje o bezpieczeństwie........................... 3 Prawne Zrezygnowanie.................................................. 3 1. Wprowadzenie............................................................ 4 1.1 Przed rozpoczęciem............................................................ 4 1.2 Wymogi systemowe................................
B-CONTROL FADER BCF2000/ROTARY BCR2000 Instrukcja obsługi Ważne informacje o bezpieczeństwie Uwaga Terminale oznaczone symbolem przenoszą wystarczająco wysokie napięcie elektryczne, aby stworzyć ryzyko porażenia prądem. Używaj wyłącznie wysokiej jakości fabrycznie przygotowanych kabli z zainstalowanymi wtyczkami ¼" TS. Wszystkie inne instalacje lub modyfikacje powinny być wykonywane wyłącznie przez wykwalifikowany personel techniczny.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Instrukcja obsługi 1. Wprowadzenie ◊ BCF2000 / BCR2000 można być używany w trybie czuwania również B-CONTROL jest uniwersalną jednostką sterującą do najróżniejszych zastosowań.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Instrukcja obsługi Zasadniczo istnieją tutaj 2 możliwości: Albo ustawia się pożądane numery kontrolera na B-Control i przenosi się je na sterowane oprogramowanie. Albo ustawia się pożądane dane kontrolera na sterowanym urządzeniu i pozwala na wyuczenie się przyporządkowania w procesie LEARN przez B-Control. Przykład: Regulowane mają być w syntezatorze komputerowym częstotliwość filtra, rezonans filtra oraz głośność za pomocą kontrolerów MIDI 5 do 7.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Instrukcja obsługi (1) (3) (4) (2) (5) (6) (10) (8) (9) (7) BCR2000 BCF2000 Rys. 3.1: Pole obsługi B-CONTROL ON / CAUTION OFF TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE: REFER SERVICING TO QUALIFIED PERSONNEL. B – CONTROL BCF2000 CAUTION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Instrukcja obsługi (7) Osiem tłumików 100-mm BCF2000 można dowolnie zdefiniować do sterowania poleceniami MIDI. Mają one napęd silnikowy tak więc przy zmianie Preset przechodzą one do aktualnej pozycji fader. Jeśli sterowane oprogramowanie lub podłączoneurządzenie MIDI obsługuje feedback parametrów, pozycje fader zmieniają się automatycznie. (8) Za pomocą przycisków PRESET wywołuje się 32 presets. Numer preset jest wskazywany na wyświetlaczu.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Instrukcja obsługi 4.1.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Instrukcja obsługi Tryb USB „U-3“: Software Sequencer push Software Mixer MIDI Keyboard move/ fade turn push Software Synthesizer MIDI OUT turn MIDI-Expander A move/ fade VOLUME MUTE DEMO FILTER LEVEL PHONES PROG TYPE COMBI PLAY push POWER MIDI IN MIDI-Expander B VOLUME MUTE DEMO FILTER LEVEL PHONES PROG TYPE COMBI PLAY POWER MIDI IN MIDI IN OUT A OUT B/THRU USB MIDI IN BCF/BCR2000 B-CONTROL MIDI Data Send Parameter Feedback MI
B-CONTROL FADER BCF2000/ROTARY BCR2000 Instrukcja obsługi Tryb USB „U-4“ (rozszerzony): Software Mixer Software Synthesizer Software Sequencer turn push turn move/fade push move/fade push MIDI-Expander VOLUME MUTE DEMO FILTER LEVEL PHONES PROG TYPE COMBI PLAY POWER MIDI IN USB MIDI IN OUT A OUT B/THRU MIDI IN Unit 1 OUT B/THRU Unit 2 Rys. 4.4: Zastosowanie w trybie USB 4 (rozszerzony) 4.1.2 Tryby stand alone BCF/BCR2000 UNIT 2 MIDI Data Send Param. Feedb.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Instrukcja obsługi Tryb Stand Alone „S-1“: Tryb Stand Alone „S-2“: MIDI Keyboard MIDI Keyboard MIDI OUT MIDI OUT Sampler MIDI-Expander A VOLUME MUTE DEMO FILTER LEVEL PHONES PROG TYPE COMBI PLAY POWER MIDI IN MIDI IN MIDI-Expander B VOLUME MUTE DEMO FILTER LEVEL PHONES PROG TYPE COMBI PLAY MIDI-Expander MIDI IN OUT A OUT B/THRU BCF/BCR2000 MIDI MIDI IN MIDI OUT A Merge MUTE DEMO FILTER LEVEL PHONES PROG TYPE COMBI PLAY
B-CONTROL FADER BCF2000/ROTARY BCR2000 Instrukcja obsługi Tryb Stand Alone „S-3“: Dla dodatkowych wyjść MIDI wymagane są zewnętrzne boksy Thru. W czasochłonnych setup MIDI preferowane jest zastosowanie boksów thru bez długich połączeń Thru, ponieważ w przeciwnym wypadku może dojść do opóźnień w transmisji danych. MIDI Keyboard Jeśli rezygnuje się z odpowiedzi w sterowaniu oprogramowania, można połączyć dowolną ilość BCF2000 / BCR2000 na MIDI.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Instrukcja obsługi B-CONTROL. Połączyć w tym celu wyjście B z MIDI IN następnego odbiornika MIDI. Aby móc przesyłać polecenia MIDI kilku urządzeń do PC, należy użyć zewnętrznej skrzynki merge MIDI. 4.2.1 Wybór preset • Wybrać preset za pomocą przycisków Preset (8) . Nowy numer preset jest wskazywany na wyświetlaczu.
• B-CONTROL FADER BCF2000/ROTARY BCR2000 Instrukcja obsługi Wcisnąć i przytrzymać przycisk LEARN i wcisnąć pożądany element obsługi. Może to być fader (jedynie BCF2000), koder (jedynie BCR2000), koder wciskany, przycisk, przełącznik nożny lub pedał nożny (tylko BCF2000). Element obsługi jest przedsatwiony na wyświetlaczu (np. E 24 lub Fd 8) ◊ Przy koderze wciskanym należy uprzednio wybrać pożądaną grupę koderów. Poza tym w przypadku koderów wciskanych rozróżnia się funkcję obrotową i wciskaną.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Instrukcja obsługi SWITCH TYPE CONTROLLERS (buttons, foot switches, push function of Push Encoders) PUSH ENCODER 1 2 3 4 5 6 7 8 MIDI Data Type MIDI Send Channel Parameter Value 1 Value 2 Controller MODE Controller Option Display Value PROGRAM CHANGE 1-16 Off, Bank Select MSB Off, Bank Select LSB Fixed Program Change-value: Off, 0 - 127 — — Value indication: On/Off CC (Control Change) 1-16 CC-0-127 On-value: 0-127 Off-Value: Off, 0-127
B-CONTROL FADER BCF2000/ROTARY BCR2000 Instrukcja obsługi Sprd Spread: Przy wartości 0 świeci się górna środkowa dioda LED, przy zwiększeniu wartości krąg zwiększa się od środka jednocześnie w lewo i prawo. Pan W ustawieniu środkowym (wartość 64) włączona jest jedynie górna środkowa dioda LED; przy mniejszych wartościach krąg przechodzi w lewo, przy wyższych w prawo (regulacja panoramiczna). Qual (Quality Q) zachowuje się w przeciwny sposób do Spread: krąg rozsezrza się przy zmniejszaniu wartości.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Instrukcja obsługi Wskazówka: 4.5 Ustawienia w globalnym setup Numer nuty jest przyporządkowywalny w rozsądny sposób jedynie elementowi Switch. Numer nuty jest wprowadzany za pomocą kodera 3. Nuta C3 (klucz C) odpowiada przy tym numerowi nuty 60. Za pomocą kodera 4 można ustawić głośność nuty (Velocity). W globalnym setup dokonywane są wszystkie ustawienia, które dotyczą całego urządzenia ponad preset.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Instrukcja obsługi Do odbioru SysEx Dump nie są wymagane jakiekolwiek ustawienia. Jeśli do B-CONTROL wysyłany jest pojedynczy preset, dane są zapisywane w pamięci tymczasowej i muszą być one zapisywane w celu ostatecznego zapisania w pożądanym miejscu w pamięci (funkcja Preset Store).
B-CONTROL FADER BCF2000/ROTARY BCR2000 Instrukcja obsługi 5.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Instrukcja obsługi GS / XG-Parameter Type Display Filter Cutoff Filter Resonance Vibrato Rate Vibrato Depth Vibrato Delay EG Attack EG Decay EG Release Modulation Portamento Time Volume Pan Reverb Send Chorus Send Delay/Variation Send NRPN NRPN NRPN NRPN NRPN NRPN NRPN NRPN CC 1 CC 5 CC 7 CC 10 CC 91 CC 93 CC 94 CUTF RESO RATE DEPT DELY ATTA DECY RELS MODU PORT VOL PAN REVB CHOR VARI Tab. 5.
B-CONTROL FADER BCF2000/ROTARY BCR2000 Instrukcja obsługi 6. Specyfikacja Interfejs USB Typ Zasilanie Elektryczne Pełna szybkość 12 mbitów/s USB MIDI Class Compliant Interfejs MIDI Typ 5-bieg. gniazda DIN IN, OUT A, OUT B / THRU Napięcie sieciowe 100 - 240 V~, 50/60 Hz Pobór mocy maks.
We Hear You