User Manual EUROPOWER EP2000/EP4000 Professional 2,000 and 4,000-Watt Stereo Power Amplifier with ATR (Accelerated Transient Response) Technology behringer.
EUROPOWER EP2000/EP4000 User Manual Table of Contents Thank you........................................................................ 2 Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited Warranty............................................................ 3 1. Introduction................................................................ 5 1.1 Before you get started...............................
EUROPOWER EP2000/EP4000 User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality commercially-available speaker cables with ¼" TS plugs pre-installed. All other installation or modification should be performed only by qualified personnel. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
EUROPOWER EP2000/EP4000 User Manual [2] Subsequently, the product must be returned in its original shipping carton, together with the return authorization number to the address indicated by MUSIC Group. [3] Shipments without freight prepaid will not be accepted. § 4 Warranty Exclusions [1] This limited warranty does not cover consumable parts including, but not limited to, fuses and batteries.
EUROPOWER EP2000/EP4000 User Manual 1. Introduction ◊ Please make sure that all units have a proper ground connection. Honestly, who really likes to read manuals? We know you want to get started right away, but please read this manual carefully and keep it for future reference. It is only after reading these instructions that you will fully understand and be able to use all the features your EUROPOWER amplifier has to offer. 1.
EUROPOWER EP2000/EP4000 User Manual 2.2 Rear panel [7] [8] [9] [11] [12] [13] [10] [14] [16] [15] Fig. 2.2: Rear panel control elements [7] These are the balanced XLR inputs (channels 1 and 2). 2.3 Configuration switches (MODE SWITCHES) [8] These are the stereo ¼" TRS inputs (channels 1 and 2). They can also be used with unbalanced plugs. [9] These are the MODE switches, used to alter the operating modes as well as to set the limiters and high-pass filters (see chapter 2.3).
EUROPOWER EP2000/EP4000 User Manual The 50 Hz filter should be engaged when using broadband speakers because the filter provides a moderate amplification in the 100-Hz range, resulting in a fuller sound. The 30 Hz filter is ideally suited for subwoofer operation as well as for broadband cabinets. The “Off” setting should be used only for special applications (e.g. studio applications), in which recognizing and subsequently removing infra-sound is important. 2.3.
EUROPOWER EP2000/EP4000 User Manual Fig. 3.2: DIP switch positions for 2-channel operation Fig. 3.4: DIP switch positions for parallel operation Parallel mode is identical to 2-channel mode, except for the inputs of both channels are internally connected in parallel. One input signal routes parallel both channels, while their filters etc. are independently controlled. When running in mono-bridged mode, the voltage of both channels is added up and fed into a single loudspeaker system.
EUROPOWER EP2000/EP4000 User Manual The BEHRINGER EUROLIVE SERIES loudspeakers are an outstanding solution for expanding your P.A. system, because each frequency range/application has a speaker type that optimally suits its characteristics. ◊ Extreme clip limiter settings in bi-amp operating mode can result in balance shifting. XENYX 2222FX Mixing Console Fig. 3.
EUROPOWER EP2000/EP4000 User Manual 4. Installation 4.1.1 Using the binding posts Your EUROPOWER can be installed into a 19" rack and requires two rack units. Please use four attaching screws and washers for installation. Reinforce the back end, especially for on-the-road use. Please assure that enough cool air reaches the rack, especially when other rack equipment emanates a lot of heat.
EUROPOWER EP2000/EP4000 User Manual 4.2 Audio connections Various cables are needed for different types of applications. The following illustrations show the correct wiring. Always use high-grade cables. Balanced ¼" TRS connector strain relief clamp When connecting a balanced input signal, please make sure to exclusively use balanced cables for passing the signal further on. Otherwise, one single unbalanced cable can turn the entire signal unbalanced.
EUROPOWER EP2000/EP4000 User Manual 5. Specifications Output Power Distortion RMS @ 1% THD (sine wave), both channels driven EP2000 8 Ω per channel 350 W 4 Ω per channel 500 W 2 Ω per channel 650 W EP2000 < 0.01% EP4000 < 0.
EUROPOWER EP2000/EP4000 User Manual Load Protection EP2000/EP4000 Turn-on/off muting, AC coupling Output Circuit Type EP2000 Class AB complementary linear output EP4000 Class H complementary linear output Power Supply Mains voltage/Breaker 100 - 120 V~, 50/60 Hz 15 A 220 - 230 V~, 50/60 Hz 8A Power consumption EP2000 1600 W EP4000 2600 W Mains connector Standard IEC receptacle Dimensions/Weight Dimensions (H x W x D) EP2000/EP4000 approx. 3.5 x 19 x 15.8" approx.
EUROPOWER EP2000/EP4000 User Manual behringer.
EUROPOWER EP2000/EP4000 User Manual behringer.
behringer.
