User's Manual

behringer.com
12 EUROPOWER EP2000/EP4000 User Manual
Specifications5.
Output Power
RMS @ 1% THD (sine wave), both channels driven
EP2000
8 Ω per channel 350 W
4 Ω per channel 500 W
2 Ω per channel 650 W
EP4000
8 Ω per channel 550 W
4 Ω per channel 950 W
2 Ω per channel 1250 W
RMS @ 1% THD (sine wave), bridged mode
EP2000
8 Ω 1000 W
4 Ω 1300 W
EP4000
8 Ω 1750 W
4 Ω 2400 W
Peak Power, both channels driven
EP2000
8 Ω per channel 400 W
4 Ω per channel 750 W
2 Ω per channel 1000 W
EP4000
8 Ω per channel 750 W
4 Ω per channel 1400 W
2 Ω per channel 2000 W
Peak Power, bridged mode
EP2000
8 Ω 1500 W
4 Ω 2000 W
EP4000
8 Ω 2800 W
4 Ω 4000 W
Distortion
EP2000 < 0.01%
EP4000 < 0.02%
Frequency Response
at 10 dB below rated output power 20 Hz - 20 kHz, +0/-1 dB
at -3 dB points 5 Hz - 50 kHz
Damping Factor
EP2000/EP4000 > 300 @ 8 Ω
Noise
unweighted, 20 Hz to 20 kHz -100 dB
Voltage Gain
EP2000 40x (32 dB)
EP4000 50x (34 dB)
Input Sensitivity
V RMS (@ 8 Ω) EP2000 1.15 V (+3.4 dBu)
EP4000 1.23 V (+4.0 dBu)
Input Impedance
EP2000/EP4000 10 k Ω unbalanced, 20 k Ω balanced
Controls
Front Power switch, gain control
(channels 1 and 2)
Rear DIP switches (10x)
Indicators
POWER green LED
CLIP red LED, 1 per channel
SIGNAL yellow LED, 1 per channel
Connectors
Inputs Balanced XLR and
¼" TRS connectors
Outputs Touch-Proof binding posts and
professional speaker connectors
Cooling
EP2000/EP4000 Continuously variable speed fan,
back-to-front air flow
Amplifier Protection
EP2000/EP4000 Full short circuit, open circuit,
thermal and HF protection Stable
into reactive or mismatched loads