User Manual EUROPOWER PMP1000/PMP3000/PMP5000 500/1,200-Watt 12, 16 and 20-Channel Powered Mixer with Multi/Dual Multi-FX Processor and FBQ Feedback Detection System
EUROPOWER PMP1000/PMP3000/PMP5000 User Manual Table of Contents Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited Warranty............................................................ 3 1. Introduction................................................................ 5 1.1 Before you get started....................................................... 5 1.1.1 Shipment.................................
EUROPOWER PMP1000/PMP3000/PMP5000 User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality commercially-available speaker cables with 1/4" TS plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
EUROPOWER PMP1000/PMP3000/PMP5000 User Manual (2) Subsequently, the product must be returned in its original shipping carton, together with the return authorization number to the address indicated by MUSIC Group. (3) Shipments without freight prepaid will not be accepted. § 4 Warranty Exclusions (1) This limited warranty does not cover consumable parts including, but not limited to, fuses and batteries.
EUROPOWER PMP1000/PMP3000/PMP5000 User Manual 1. Introduction IMPORTANT NOTES CONCERNING INSTALLATION Congratulations! With the PMP1000/PMP3000/PMP5000 you have acquired a state-of-the-art power mixer that sets new standards. Right from the very start it has been our goal to design a revolutionary unit that can be used for a wide variety of applications. Indeed, this overwhelming power mixer gives you plenty of functionality and a broad range of connection and expansion options.
EUROPOWER PMP1000/PMP3000/PMP5000 User Manual (6) Use the MID control to boost or cut the midrange frequencies. (7) PMP5000: The PMP5000 has an additional semi-parametric filter for the midrange frequencies in the mono channels (tunable from 100 Hz to 8 kHz). Adjust the boost/cut with the MID control, and the frequency with the FREQ control. The stereo channels contain a stereo EQ section.
EUROPOWER PMP1000/PMP3000/PMP5000 User Manual ◊ Caution! Never use unbalanced XLR connectors (pins 1 and 3 interconnected) on the MIC input jacks, if you are going to use the phantom power supply. (27) The AMP MODE switch determines the mode of operation of the PMP amplifier stage: PMP1000: MAIN: In the “MAIN” position the mixer works as a stereo amplifier. MON: In this mode the monitor signal is present at OUTPUT A (71) and the main signal at OUTPUT B (70) (both are mono).
EUROPOWER PMP1000/PMP3000/PMP5000 User Manual (41) The FX 1/2 TO MON 2 control allows you to determine the effect intensity of the multi-effects processor in the monitor 2 mix. No effect is sent to the monitor 2 mix with this control turned fully counter-clockwise. (54) PMP3000/PMP5000: With the CD/TAPE IN control you can adjust the volume of the line signal present at the CD/TAPE INPUT (55) . Use the PFL switch to monitor the signal.
EUROPOWER PMP1000/PMP3000/PMP5000 User Manual (62) PMP3000/PMP5000: The MONO OUT is for connecting a subwoofer. The PMP5000 has the additional possibility of setting the low-frequency range for the subwoofer. Use the SUB FILTER control (50) to adjust the frequency. (63) The FX SEND connector can be used to route the FX SEND signal from the input channel, for example, to the input of an external effects device.
EUROPOWER PMP1000/PMP3000/PMP5000 User Manual Balanced ¼" TRS connector ¼" TS footswitch connector strain relief clamp strain relief clamp sleeve sleeve ring tip tip sleeve ground/shield sleeve pole 1/ground ring cold (-ve) tip hot (+ve) For connection of balanced and unbalanced plugs, ring and sleeve have to be bridged at the stereo plug. Fig. 4.2: ¼” TRS connector Balanced use with XLR connectors tip pole 2 The footswitch connects both poles momentarily Fig. 4.
EUROPOWER PMP1000/PMP3000/PMP5000 User Manual 4.3 Loudspeaker connections Your power mixer is equipped with high-quality loudspeaker connectors (compatible to Neutrik Speakon), which ensure safe and trouble-free operation. The Speakon connector was especially developed for high-power loudspeakers. Once it is plugged in, it safely locks into position and cannot be accidentally disengaged. It prevents the occurrence of electrical shock and ensures the correct polarity.
EUROPOWER PMP1000/PMP3000/PMP5000 User Manual 5. Wiring Examples Subwoofer F.O.H. mix Monitor mix Loudspeaker connection (monitor mix) PMP1000/PMP3000/ PMP5000 Rear panel EUROPOWER EP1500 PMP1000/PMP3000/ PMP5000 (part view) 2 x BEHRINGER EUROLIVE Stack (B1500 & B1020, both passive) EUROPOWER B1520 Loudspeaker connection (monitor mix) front panel (part view) EUROPOWER B1500X subwoofer Footswitch Link output 2 x BEHRINGER B300 (active) Fig. 5.
EUROPOWER PMP1000/PMP3000/PMP5000 User Manual Loudspeaker connection for F.O.H. and monitor mix (mono) ULTRA-G GI100 Keyboard V-AMP2 Electric bass Vocal mics PMP1000/PMP3000/PMP5000 Rear panel (excerpt) Electric guitar Stereo channel 13/14 CD player Mono channel 5 Mono channels 1-4 DAT recorder Mono channel 6 CD/Tape In 2 x BEHRINGER EUROLIVE B1520 (passive) CD/Tape Out 2 x BEHRINGER EUROLIVE F1520 (passive) Fig. 5.
EUROPOWER PMP1000/PMP3000/PMP5000 User Manual BEHRINGER EUROLIVE B1220 BEHRINGER EUROLIVE B1800X PMP1000/PMP3000/ PMP5000 Rear panel Output B Output A Vocals/voice BEHRINGER XM1800S BEHRINGER EUROPOWER EP1500 Drums/percussion Active subwoofer MAIN 1 OUT BEHRINGER B-2 PRO MONO OUT Stereo inputs MON 1/2 OUT Keyboard BEHRINGER V-AMP 2 PHONS/CTRL OUT CD/TAPE IN Drum Computer BEHRINGER EUROPOWER EP1500 Headphone amplifier BEHRINGER POWERPLAY PRO-XL HA4700 BEHRINGER HPS3000 Electric guit
EUROPOWER PMP1000/PMP3000/PMP5000 User Manual 6. Specifications PMP1000 Microphone Inputs Type Pre Amp Outputs XLR, electronically balanced, discrete input circuit Mic E.I.N. (20 Hz - 20 kHz) @ 0 Ω source resistance -134 dB / 136 dB A-weighted @ 50 Ω source resistance -131.5 dB / 134 dB A-weighted @ 150 Ω source resistance -129 dB / 131 dB A-weighted Main Type 1/4" TRS connectors, unbalanced Impedance approx. 150 Ω, unbalanced Max.
EUROPOWER PMP1000/PMP3000/PMP5000 User Manual DSP Power Supply (J) Converter 24-Bit Delta-Sigma, 64/128-times oversampling Mains voltage 100 - 240 V~, 50 / 60 Hz Dynamics D/A 90 dB Power consumption 500 W Sampling rate 46.875 kHz Fuse T 5 A H 250 V Delay Time max. 5 s Mains connector Standard IEC receptacle Signal run time (Line In à Line Out) approx. 1.
EUROPOWER PMP1000/PMP3000/PMP5000 User Manual PMP3000 Microphone Inputs Type Pre Amp Outputs XLR, electronically balanced, discrete input circuit Mic E.I.N. (20 Hz - 20 kHz) @ 0 Ω source resistance -134 dB / 136 dB A-weighted @ 50 Ω source resistance -131.5 dB / 134 dB A-weighted @ 150 Ω source resistance -129 dB / 131 dB A-weighted Main Type 1/4" TRS connectors, unbalanced Impedance approx. 150 Ω, unbalanced Max.
EUROPOWER PMP1000/PMP3000/PMP5000 User Manual DSP Power Supply (J) Converter 24-Bit Delta-Sigma, 64/128-times oversampling Mains voltage 100 V~, 50 / 60 Hz Dynamics D/A 90 dB Power consumption 1000 W Sampling rate 46.875 kHz Fuse T 10 A H 250 V Delay Time max. 5 s Mains connector Standard IEC receptacle Signal run time (Line In à Line Out) approx. 1.
EUROPOWER PMP1000/PMP3000/PMP5000 User Manual PMP5000 Microphone Inputs Type Pre Amp Outputs XLR, electronically balanced, discrete input circuit Mic E.I.N. (20 Hz - 20 kHz) @ 0 Ω source resistance -134 dB / 136 dB A-weighted @ 50 Ω source resistance -131.5 dB / 134 dB A-weighted @ 150 Ω source resistance -129 dB / 131 dB A-weighted Main Type 1/4" TRS connectors, unbalanced Impedance approx. 150 Ω, unbalanced Max.
EUROPOWER PMP1000/PMP3000/PMP5000 User Manual DSP Power Supply (J) Converter 24-Bit Delta-Sigma, 64/128-times oversampling Mains voltage 100 V~, 50 / 60 Hz Dynamics D/A 90 dB Power consumption 1000 W Sampling rate 46.875 kHz Fuse T 10 A H 250 V Delay Time max. 5 s Mains connector Standard IEC receptacle Signal run time (Line In à Line Out) approx. 1.
EUROPOWER PMP1000/PMP3000/PMP5000 User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION EUROPOWER PMP1000/PMP3000/PMP5000 Responsible party name: MUSIC Group Services USA, Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.