USB-GUITAR iAXE Software Installation Guide A50-61290-00003 CD1: == Native Instruments Guitar Combos — 3 different combos (PC / Mac) == Audacity (PC / Mac) == BEHRINGER USB AUDIO driver (PC) CD2: == energyXT2 Compact (PC / Mac)
iAXE USB-GUITAR 1.2 System requirements 1. Introduction To connect your iAXE to a computer, you need a free USB slot. This manual covers the iAXE 393 / 624 / 629 USB-GUITAR. 1.1 Included software Your iAXE comes with a complete software bundle which allows you to start immediately. The software package consists of: CD1: == Native Instruments Guitar Combos — 3 different combos (PC / Mac) == Audacity (PC / Mac) == BEHRINGER USB AUDIO driver (PC) ++ Your iAXE is compatible with both PC and Mac computers.
iAXE USB-GUITAR 2. Installation for Windows 2.1 Installing the iAXE To install the USB AUDIO driver, proceed as follows: 1) Power on your computer. 2.2 Installing the Guitar Combos software The Guitar Combos software consists of three different combos. Choose any or all of them for installation. With the serial number on the CD sleeve you can fully activate one combo. For details, refer to the imprint on the CD sleeve.
iAXE USB-GUITAR Fig. 2.4: Audio Setup settings 4) Click on the ASIO Config button to bring up the driver settings dialog. See chapter "Installing the iAXE" for details on how to configure the driver. Fig. 2.6: Audio Setup settings 2.3 Installing Audacity Audacity is a free software for recording and editing sounds. To install the software, proceed as follows: 1) Double-click on "audacity.exe" in the "Audacity" folder. 3) Click on the Advanced button to bring up the driver settings dialog.
iAXE USB-GUITAR 4) System Performance = rapid (or even highspeed). Clicks or dropouts in recording 1) Start the ASIO-USB Control Panel from within the audio software (may be called ASIO Config or similar). 2) USB Device = BEHRINGER USB AUDIO. 3) Click on the ASIO tab. 4) System Performance = normal. 3) Please note, when using the Guitar Combos plug-in inside a host application (for example, audio recording software such as energyXT2), all the signal routing is determined in the host application.
iAXE USB-GUITAR 3.4 Installing energyXT2 Compact 3.6 Troubleshooting energyXT2 Compact is a powerful audio production environment for creating your own music. See the list of common problems, and hints on how to resolve them, if you encounter any software problems. Please refer to the file "how_to_install.pdf" on the energy XT2 Compact CD for details on how to install the software.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION iAXE USB-GUITAR iAXE393/iAXE624/iAXE629 Responsible party name: MUSIC Group Services USA, Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.